SCYTHE SCMG-5200BE Mugen 5 Black Edition CPU Cooler Installation Guide
- June 5, 2024
- SCYTHE
Table of Contents
SCYTHE SCMG-5200BE Mugen 5 Black Edition CPU Cooler
INSTALLATION GUIDE
-
* Peel Off Before Installation-
Screws already pre-attached for LGA 1700.
-
Clip
-
Screw (Intel)
-
Kaze Flex Il 120 PWM Fan
Fan Speed (Max /Min ) is controlled by the PWM Signal of motherboards,
therefore it might vary depending on motherboard setting and
equipment.
WARNING
In case the “CPU FAN ERROR” message is displayed by the UEI (BIOS), go adjust the UEFI fan speed settings (‘CPU Fan Speed Low Limit” -Option). Please read the motherb0ard manual before setting.
ITEM LIST
-
* Cpu Cooler- Kaze Flex Il 120 PWM Fan
- Mounting Bar is already pre-installed on the Heatsink.
Intel
- LGA 2066 Square ILM /2011 (V3) Square ILM
- LGA 1700 / 1200/1156/1155/1151/1150
AMD
AM4/ AM3(+) /AM2(+) / FM2(+) / FM1
CAUTION
To prevent electrical shocks, please turn off the system power and unplug the power cord of the system before beginning the installation. Before using this product, please carefully read the manual of this product. For your safety, please ensure this product is installed correctly. Improper installation or use of this product could pose potential fire hazards. It is recommended to reserve enough space for installing this product as well as to wear gloves to prevent any injuries during the installation. To prevent injuries, please be careful as the edges of the devices installed in your system can be sharp. Please keep this product and accessories away from children.
WARRANTY
Manufacturer guarantees its products to be free from defects in workmanship and materials for two (2) years from the date of purchase. In order to receive warranty service, please contact the store where you purchased the product. Warranty for this product is provided only if the product is installed properly and used for the recommended environment/ usage. The manufacturer is not responsible for any other damages caused to hardware/ software or data due to misuse of this product. The manufacturing process may have caused small scratches on this product. These scratches will not affect the performance of the product.