RALPH LAUREN RL 1702 Holloway XL Tripod Floor Lamp Instruction Manual

RALPH LAUREN RL 1702 Holloway XL Tripod Floor Lamp

ASSEMBLY INSTRUCTIONS

NOTICE:
This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved

TOOLS REQUIRED (NOT INCLUDED):

Scissors

1. Carefully remove all parts from the box. Place on a clean, soft surface.

2. Thread shade riser (C) to the top of cluster (D).

3. Remove finial (A) from shade riser (C).

4. Remove shade (B) from packaging and install to shade riser (C) using finial (A).
   NOTE: If shade has additional packaging, carefully cut off from interior of the shade to avoid damage.

5. Install light bulbs into the sockets.

6. Remove protective cover (E) from the plug.

7. Plug into an electrical outlet and test the fixture.

Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>