RUKKET RBND600 Lacrosse Rebounder Instruction Manual
- June 4, 2024
- RUKKET
Table of Contents
RUKKET RBND600 Lacrosse Rebounder
AUKKET® LACROSSE AEBDUNDEA
WARNING:
-
Never climb on the rebounder wall
-
Please use adult supervision when setting up and using this rebounder
-
Keep hands and fingers clear of all moving parts
-
The metal pieces may have sharp edges
-
The user should be positioned directly in front of the rebounder
-
Place the rebounder on a level, well drained surface. Make sure to set the rebounder up in a location where, when a ball
misses the rebounder or is missed by the player on its return, the ball will not strike or cause damage to people, pets, houses, or structures -
Children should not operate the rebounder adjustment; adjustments should be made by an adult
-
To prevent injury, children should not use the rebounder until properly instructed
-
Do not stand behind the rebounder
-
This rebounder is not intended for personal protection
-
Never climb on the rebounder
-
This rebounder deflects fast moving objects, so people should be at lease 10 feet away when it is in use
-
It is important to become familiar with the way a ball reacts to the rebounder; stand at least 30 feet from the rebounder when first using it so
you can become familiar with the speed and power of returned balls -
Failure to follow these precautions could result in serious injury or damage to property
PARTS INCLUDED
- A. Rebounder Wall Main Frame
- B. Hex Wrench
- C. Allen Wrench
- D. Long ‘L’ Shaped #3
- E. Pole #6
- F. Pole #5
- G. Pole #4
- H. Short ‘L’ Shaped #1
- I. Pole #2
- J. Anti Slip Rings
- K. Long Screw
- L. Middle Screw
- M.Short Screw
- N. Cover
Assembly Instruction
- Lay out the pieces.
- With a hand on the top and bottom of the frame, apply pressure to unfold rebounder wall. Lock the hinge plate on both sides using the 2 longest screws.
- Connect both short ‘T’ shaped #1 poles to pole #2 to create a “U” shape.
- Insert the short front legs into the front pegs on the main frame.
- Connect both long ‘T’ shaped #3 poles to pole #4 to create a second “U” shape.
- Flip the frame over and insert the long back legs into the back pegs on the main frame.
- Attach pole #5 to pole #4 using the provided middle screw, then loosen the knob handle on pole #5.
- Lift the back legs so that pole #6 can be attached to the back of the main frame, using the shortest screw.
- Lock the knob handle on pole #5, and stand up the rebounder.
- To adjust the angle of the rebounder, unlock the knob handle on pole #5, move the rebounder into position, and lock the knob handle again.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>