Rebel KOM1081 PC Headset Owner’s Manual
- June 4, 2024
- Rebel
Table of Contents
PC Headset
Owner’s Manual
model: KOM1081
PRODUCT DESCRIPTION
- Microphone
- Volume wheel
- The microphone on/off switch
- 3,5 mm headphones jack
- 3,5 mm microphone jack
- USB plug
CONNECTIONS
Note: No driver installation is needed, the operating system will
automatically detect and configure the device.
- Connect the USB plug to the USB port of your PC or laptop. The RGB backlight on the headphones will turn on.
- Connect the 3,5 mm jack (with headphones symbol on it) to the headphone output of your PC or laptop to transmit sound.
- Connect the 3,5 mm jack (with microphone symbol on it) to the microphone input of your PC or laptop to transmit microphone sound.
OPERATION
1. Rotate the volume wheel to increase/decrease volume.
2. Use the switch to turn the microphone on/off.
SPECIFICATION
RGB lighting
Magnet: neodymium
Speaker size: 40 mm
Impedance: 30 Ohm ± 15%
S/N ratio: 60 dB
THD: 2%
Frequency response: 20 Hz – 20 kHz
Nominal input power: 20 mW
Maximum input power: 30 mW
Microphone: omnidirectional
Microphone sensitivity: -43 dB
Sensitivity: 105 dB ± 6 dB
Cable length: 1,8 m
Connections: 3,5 mm microphone jack, 3,5 mm audio jack, USB plug Weight: 280 g
LEARN MORE
For more information on this device visit:
www.krugermatz.com.
Read the owner’s manual carefully before using it.
Visit www.krugermatz.com website for more
products and accessories.
In case of any doubts or questions reach out to our Frequently Asked Questions
section.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
It is forbidden to place equipment waste marked with the symbol of a
crossed-out trash bin together with other waste. This equipment is subject to
collection and recycling. The armful substances it contains can cause
environmental pollution and pose a threat to human health.
Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolińska 1,
08-400 Miętne.