Schneider Electric DAILY Line Comfort SP LED Instruction Manual
- June 4, 2024
- Schneider Electric
Table of Contents
Schneider Electric DAILY Line Comfort SP LED
ABOUT
Electric installation work may only be carried out by approved specialists according to the local regulations. Liability will only be accepted by us when our products are installed by qualified engineers. The light sources incorporated in this product should only be replaced by the manufacturer, or by another similarly well-qualified person. Rooms with baths or showers have to be protected with a residual-current-operated protective device (RCD) FI (RCD) I ∆ n = 30mA. Volume 2 min. protection IP X4. Volume 2 no socket admitted.
CE
The product is controlled after current guidelines. Indoor installation only.
DISPOSE
The product must be disposed of separately from normal household waste. This product must be switched on and off with the wall switch!
Assembling instructions
IMPORTANT
****Turn off the electricity before beginning.
RISK
DIMENSIONS
Press on the magnetic holder firmly!
IMPORTANT
Make sure that the magnet sticks! If necessary, add washers underneath the
magnet.
Wiring
Notes
This product must be switched on and off with an external wall switch!
W. Schneider+Co. AG, Neue Dorfstrasse 27, CH–8135 Langnau a. A. www.wschneider.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>