LEAFGLO Solar Charger with Artificial Leaf Lights User Manual

LEAFGLO Solar Charger with Artificial Leaf Lights

SOLAR CHARGER COMPONENTS

1. Solar Panel
2. Cable connecting with the LED Lights
3. Light Mode Button
4. Power ON/OFF Button
5. Battery Box
6. Slot
7. Connecting Rod
8. Spike Connector
9. Spike

PRODUCT FEATURES

• Energy-saving & Eco-friendly: Skip the higher electricity bills. During the day, the efficient solar panel converts the sunlight into electrical energy stored in the built-in rechargeable battery, then the string lights will automatically light up at night.
• Multi-application scenarios: The String Lights is a great decorative accessory to illuminate indoor and outdoor spaces, like your gardens, patio, fence, gate, yard, wedding, party, Christmas trees, etc. And the copper wire is quite flexible, easily bent into any shape you like.
• 8 Working Modes: Choose the lighting effect you prefer and create a romantic atmosphere.
• Splashing Waterproof: Both the string lights and the solar panel are IP55 Waterproof. No worry about using them during rainy days.

INSTALLATION GUIDE

1. Tear off the protective film from the solar panel.
2. Press the Power ON/OFF button and keep the light at the “ON” stage for normal daily charging.
3. Set your favorite working mode by the MODE button in the evening or get something to cover the solar panel in the daytime.
4. Insert the connecting rod into the slot.
5. Connect the spike to the connecting rod, and insert the spike in the desired location where the solar panel can get sufficient sunlight throughout the day.

IDEAL LOCATION CHOOSEN

The working time duration for LEAFGLO depends on the geographical location, weather conditions, and effective seasonal light available. Try to choose an outdoor area with full & direct sunlight, ensuring the solar panel can receive at least 6 hours of sunshine daily. The spike should be mounted in such a way that the solar panel is facing south at a 20–30-degree angle. The solar panel will convert solar energy into electrical energy to power the lights. At night, the solar light turns on, using the stored energy automatically.

USAGE

• Step 1 : First, turn on the switch on the solar panel. Once the switch is turned on, there is no need to turn it off again, except to retain and reserve battery energy for future use.
• Step 2 : The solar light string will automatically light up when it gets dark.
• Step 3 : Switch between 8 different lighting modes by pressing the mode button as needed.

If you CAN NOT turn on the solar light after 6 hours of charging, please check the following:

• Make sure the power switch in in the “ON” position.
• Check the batteries to ensure there is good contact with the terminals.
• Ensure the solar panel facing up to ensure sunlight is shining on it directly.
• Keep the solar panel clean to avoid disturbance of light absorption for battery charging.
• To make sure the product is not exposed to a strong light environment.

Remote control:

• If you are purchasing a package with a remote control, you can also use the remote control to control the switch, adjust the lighting mode, adjust brightness, and timing functions.
• The operating range of a remote control is usually within a certain distance, exceeding the range may cause unstable signal transmission or an inability to operate

ATTENTIONS

• To maximize battery capacity, the solar sensor string light should be fully charged by direct sunlight at least for eight hours before initial use
• To ensure the normal working of the light detector, please install the solar panel away from other light sources
• Do not immerse the solar panel in water or expose it to extreme humidity for a long time.
• Please do not disassemble the product randomly to avoid damage or affecting normal use.
• Before use, please ensure that the solar panel is clean to achieve the best charging effect.

1. Place in direct sunlight.
2. Keep away from children. Do not let them operate the device.
3. No striking. Do not touch with sharp objects.
4. Splash-proof (IP55 ingress protection rating)
5. Keep away from fire or sources of heat.

MAINTENANCE AND UPKEEP

• Before cleaning the light string, please turn off the power and remove the battery.
• Do not use any chemical solvents or strong acid-base cleaning products to avoid damaging the shell or lamp beads.

INSTRUCTIONS FOR RECYCLING AND DISPOSAL

This label means that the product cannot be disposed of as other household waste throughout the EU. To prevent potential damage to the environment or human health from uncontrolled waste disposal. Recycle responsibly to promote the sustainable use of material resources. If you want to return a used device, use the drop-off and collection system, or contact the retailer from whom you bought the product. The retailer can accept the product for environmentally safe recycling. A declaration by the manufacturer that the product complies with the requirements of the applicable EU Directives.

Frequently Asked Questions (FAQ)

Q: How do I change the working mode of the lights?
A: You can change the working mode by pressing the Light Mode Button on the device.

Q: Can children operate the solar charger?
A: It is recommended to keep the device away from children and not allow them to operate it for safety reasons.

Q: Is the solar charger water-resistant?
A: Yes, the solar charger is splash-proof with an IP55 ingress protection rating.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>