SONY XBR Series Television User Guide

XBR Series Television
User Guide

XBR Series Television

Sony Customer Support
U.S.A.: http://www.sony.com/tvsupport
Canada: http://www.sony.ca/support
United States Canada
1.800.222.SONY 1.877.899.SONY
Please Do Not Return the Product to the Store

XBR-75X900E / 75X850E / 65X900E / 65X850E / 55X900E / 49X900E

Introduction

Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference.
Note
• Images and illustrations used in the Setup Guide and this manual are for reference only and may differ from the actual product.
The 75” class has a 74.5 inch (189.3 cm) viewable image size, the 65” class has a 64.5 inch (163.9 cm) viewable image size, the 55” class has a 54.6 inch (138.8 cm) viewable image size and the 49” class has a 48.5 inch (123.2 cm) viewable image size (measured diagonally).
Location of the Setup Guide
The Setup Guide is placed on top of the cushion inside the TV carton.
Help/Help Guide
The help feature offers a lot of information about your TV. To use the Help feature, press HELP on the remote control. You can find how to troubleshoot from the list or keyword search. Select [Help Guide] on the Help menu to view the manual. If you connect your TV to the internet, the Help feature and information will be updated.
Location of the identification label
Labels for the TV Model No. and Power Supply ratings are located on the rear of the TV.
For models with supplied AC adapter:
Labels for the AC adapter Model No. and Serial No. are located on the bottom of the AC adapter.

IMPORTANT NOTICE

Owner’s Record
The model and serial numbers are located at the side and/or rear of the TV. Record these numbers in the spaces provided below. Refer to them whenever you call your Sony dealer regarding this TV.
Model Name……………………
Serial No……………………..
CAUTION
To prevent electric shock and blade exposure, do not use this AC plug with an extension cord, receptacle or another outlet unless the blades can be fully inserted.

• Operate the TV only on 110 V – 240 V AC (U.S.A./Canada 120 V AC) (except models with supplied AC adapter) Operate the TV only on DC 24 V (with AC adapter)
  (XBR-65X900E only)
  Operate the TV only on DC 19.5 V (with AC adapter) (XBR-55/49X900E only)

Note
This television includes a QAM demodulator which should allow you to receive unscrambled digital cable television programming via subscription service to a cable service
provider. The availability of digital cable television programming in your area depends on the type of programming and signal provided by your cable service provider.

Safety information

Declaration of Conformity
FCC Related Information
Trade Name: SONY
Model: XBR-75X900E/XBR-75X850E/XBR-65X900E/ XBR-65X850E/XBR-55X900E/XBR- 49X900E
Responsible Party: Sony Electronics Inc.
Address: 16535 Via Esprillo,
San Diego, CA 92127 U.S.A.
Telephone Number: 858-942-2230
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Pursuant to FCC regulations, you are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

Safety and Regulatory

This device complies with Industry Canada’s license-exempt RSS. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This
device must accept any interference, including interference that may cause undesired operation of the device.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.
5 GHz bands are restricted to indoor operations only.
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and
RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from the person’s body (excluding extremities: hands, wrists, feet, and ankles). This device and its antenna(s) must not be co-located or operating with any other antenna or transmitter except
Grant condition.
High-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650- 5850 MHz and these radars could cause interference and/or damage to LE-LAN devices.
WARNING
Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• Using cabinets or stands recommended by the manufacturer of the television set.
• Only using furniture that can safely support the television set.
• Ensuring the television set is not overhanging the edge of the supporting furniture.
• Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
• Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the television set or its controls.

If your existing television set is being retained and relocated, the same considerations as above should be applied.
NOTE ON AC ADAPTER (models with supplied AC adapter only)
Warning
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
To prevent fire or shock hazards, do not place objects filled with liquids, such as vases, on the apparatus.
Do not install this equipment in a confined space, such as a bookshelf or similar unit.

• Please ensure that the AC power outlet is installed near the equipment and shall be easily accessible.

• Be sure to use the supplied AC adapter and AC power cord. Otherwise, it may cause a malfunction.

• Connect the AC adapter to an easily accessible AC power outlet.

• Do not coil the AC power cord around the AC adapter. The core wire may be cut and/or it may cause a malfunction of the TV.
  

• Do not touch the AC adapter with wet hands.

• If you notice an abnormality in the AC adapter, disconnect it from the AC power outlet immediately.

• The set is not disconnected from the AC source as long as it is connected to the AC power outlet, even if the set itself has been turned off.

• As the AC adapter will become warm when it is used for a long time, you may feel hot when touching it by hand.

Before setting up your TV
Some TV models are packaged with a detached Table-Top Stand so you can mount your TV to a wall right away. See page 13 (Installing the TV to the Wall) if you want to mount the TV to a wall. If you are not mounting the TV to a wall, you will need to attach the Table-Top Stand. You will need a Phillips screwdriver (not supplied) and the supplied screws to complete the task. Look for the Setup Guide.
Be sure to consider the following while setting up your TV:

• Disconnect all cables when carrying the TV.
• Carry the TV with an adequate number of people; larger size TVs require two or more people.
• Correct hand placement while carrying the TV is very important for safety and to avoid damage.

• Ensure your TV has adequate ventilation, see page 16.
• For best picture quality, do not expose the screen to direct illumination or sunlight.
•  Avoid installing the TV in a room with reflective wall and floor materials.
• Avoid moving the TV from a cold area to a warm area. Sudden room temperature changes may cause moisture condensation. This may cause the TV to show poor picture and/or poor color. Should this occur, allow moisture to evaporate completely before powering the TV on.

Securing the TV
Sony strongly recommends taking measures to prevent the TV from toppling over.
Unsecured TVs may topple and result in property damage, serious bodily injury or even death.
Preventing the TV from Toppling

• Secure the TV to a wall and/or Stand.

• Do not allow children to play or climb on furniture and TV sets.

• Avoid placing or hanging items on the TV.

• Never install the TV on:
  – slippery, unstable, and/or uneven surfaces.
  – furniture that can easily be used as steps, such as a chest of drawers.

• Install the TV where it cannot be pulled, pushed, or knocked over.

• Install the TV so that the TV’s Table-Top Stand does not protrude out from the Stand (not supplied). If the TableTop Stand protrudes out from the Stand, it may cause TV set to topple over, fall down, and cause personal injury or damage to the TV.

• Route all AC power cords and connecting cables so that they are not accessible to curious children.

Recommended Measures to Secure the TV
Consider the following measures when securing your TV to a Stand (not supplied).
1 Secure the Stand for the TV.
Make sure the Stand can adequately support the weight of the TV. Use two angle braces (not supplied) to secure the Stand. For each angle brace use the appropriate hardware to:

• Attach one side of the angle brace to the wall stud.
• Attach the other side to the Stand.

2 Secure the TV to the Stand.
Use the optional hardware listed as follows (not supplied):

• M6 machine screws (screwed into the TV’s rear cover).
• A screw or similar (attach it to the Stand).
• Rope or chain (strong enough to support the weight of the TV). Make sure that there is no excess slack in the rope or chain.

The length of the M6 machine screw differs depending on the rope or chain diameter. Please see below illustration.

Anchor the TV to the wall by using bolts, a wall anchor, and a chain (or rope).
XBR-75/65/55/49X900E

Please see the below illustration for the M6 eye bolt length.
Note

• Your TV is shipped with screws attached to the rear of the TV depending on the TV model. (They are fastened in the screw holes for wall mounting.) Be sure to remove the upper two screws prior to anchoring the TV to a wall.
• Securing the TV to the Stand without securing the TV and the Stand to the wall provides minimum protection against the TV toppling over. For further protection, be sure to follow the three measures recommended.

Precautions

How to care for your BRAVIA TV
Safety is very important. Please read and follow the safety documentation (Safety Booklet) separately provided.
Unplug the TV and other connected equipment from the wall outlet before you begin cleaning your TV.

• Wipe the LCD screen gently with a soft cloth.

• Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.

• If using a chemically pretreated cloth, please follow the instruction provided on the package.

• Never spray water or detergent directly on the TV set. It may drip to the bottom of the screen or exterior parts and enter the TV set, and may cause damage to the TV set.

• Never use strong solvents such as thinner, alcohol or benzine for cleaning.

• Do not plug in the TV into the wall outlet until the moisture from cleaning has evaporated.

• Do not touch the TV if your hand is covered in any chemical substance such as hand cream or sunblock.

The TV should also be placed on a stable surface to prevent it from toppling over (see page 4). If you have young children or pets at home, check regularly to ensure the TV is
securely fastened.
Recommendation for an F-type plug
The projection of the inner wire from the connection part must be less than 1.5 mm.

(Reference drawing for an F-type plug)

The BRAVIA® 4K TV Experience
Thank you for choosing Sony! Your new BRAVIA® TV opens the door to the “4K TV Experience.” This document will help you get the most out of your TV.
Please take a moment to register your TV at:
U.S.A.: http://productregistration.sony.com
Canada: http://www.sony.ca/registration
Four Steps to a 4K TV Experience Set, Source, Sound, and Setup.

1. Set
   Now that you have made the best selection in LED-backlit LCD TV technology, be sure to remove all of the accessories from the packaging before setting up your TV.

2. Source
   To experience the stunning detail of your BRAVIA TV, you need access to HD programming.
   • Upgrade your signal or content source to high-definition (4K) by contacting your HD service provider.
   • Bring the astonishing resolution of your Sony 4K Ultra HD TV to life with Sony 4K Ultra HD Media Player. (The availability depends on region)
   • Receive over-the-air HD broadcasts with an HD-quality antenna connected directly to the back of your TV.
   Visit http://www.antennaweb.org for more information on antenna selection and setup.
   • Discover the wealth of entertainment now available on super-high resolution Blu-ray Disc™ player and other Sony HD equipment.

3. Sound
   Complete the high-definition experience with a BRAVIASync™ surround sound system or A/V receiver from Sony.

4. Setup
   Install your TV and connect your sources. See page 11 for sample connection diagrams. To help assure the highest quality for your 4K experience, use Sony HDMI (High-Definition Multimedia Interface) cables.
   To learn more about 4K TV, visit:
   U.S.A.: http://www.sony.com/HDTV
   Canada: http://www.sony.ca/hdtv

This TV displays all video input signals in a resolution of 3,840 dots × 2,160 lines.
The following chart shows the high-definition (HD) and standard-definition (SD) video formats supported by your BRAVIA TV inputs.       

1 For details of supported formats, refer to the “Specifications” in this manual.
2 For supported PC formats refer to the Help Guide.

Parts and Controls

Controls and Indicators

1.   (Power) /+/-
   When the TV is off,
   Press to power on.
   When the TV is on,
   Press and hold to power off.
   Press repeatedly to change the function, then press + or – button to:
   •Adjust the volume.
   • Select the channel.
   • Select the input source of the TV.

2. Remote Control sensor / Light sensor / Illumination LED
   The illumination LED lights up or blinks according to the status of the TV.
   For more information, refer to the Help Guide.

• Do not place anything near the sensor.

Using Remote Control

Remote Control Parts Description
The remote control shape, location, availability, and function of the remote control button may vary depending on your region/country/TV model.

1. INPUT
   Display and select the input source.
   (Microphone)
   Use Voice Function. (e.g., Search various content by voice.)
   POWER
   Turn on or turn off the TV (standby mode).
   SYNC MENU
   Display the BRAVIA Sync Menu.

2. Number buttons
   Use the 0-9 buttons to select digital channels.
   DISPLAY
   Display information about the channel/ program/input you are viewing.

3. Google Play
   Access the “Google Play” online service.
   NETFLIX (Only on limited regions/country/TV model)
   Access the “NETFLIX” online service.
   Color buttons
   Execute the corresponding function at that time.

4. ACTION MENU
   Display a list of contextual functions.
   TV
   • Switch to a TV channel or input from other applications.
   • Turn on the TV to display the TV channel or input.
   GUIDE
   Display the digital program guide.
   BACK
   Return to the previous screen.
   HOME
   Display the TV Home Menu.
   DISCOVER
   Bring up the Content Bar to search for content.
   (Item select/Enter)

5. VOL +/– (Volume)
   Adjust the volume.
   JUMP
   Jump back and forth between two channels or inputs. The TV alternates between the current channel or input and the last channel or input that was selected.
   MUTING
   Mute the sound. Press again to restore the sound.
   CH +/– (Channel)
   Select the channel.

6. AUDIO
   Change the language for the program currently being viewed.

Operate media content on TV and connected BRAVIA Sync-compatible device.
SUBTITLE/CC
Turn subtitles on or off (when the feature is available).
HELP
Display Help menu. The Help Guide can be accessed here.
WIDE
Change the screen format.
PIC OFF
Turn the picture off, while the sound remains on.

Guidelines for IR Remote Control

• Point your remote control directly at the IR sensor located on your TV.

• Make sure that no objects are blocking the path between the remote control and the IR sensor on your TV.
  

• Fluorescent lamps can interfere with your remote control; try turning off the fluorescent lamps.

• If you are having problems with the remote control, reinsert or replace your batteries and make sure that they are correctly inserted.

Connection Diagram

For more information on connections, refer to the Help Guide by pressing HELP on the remote control.
Note
• When connecting the cable to the Cable/Antenna input, finger tightening only, over-tightening the connection can damage the TV.

1. USB 1/2, USB 3
   • Connecting a large USB device may interfere with other connected devices beside it.
   • When connecting a large USB device, connect to the USB 1 port.

2. AUDIO OUT /
   • Supports 3-pole stereo mini jack only.
   • To listen to the TV’s sound through the connected equipment, press HOME. Select [Settings]  [Sound] [Headphone/Audio out] and then select the desired item.

3. HDMI IN 1/2/3/4
   • If the device has a DVI jack, connect it to HDMI IN 1 through a DVI – HDMI adaptor interface (not supplied), and connect the device’s audio out jack to HDMI 1 AUDIO IN.
   • If connecting a digital audio system that is compatible with Audio Return Channel (ARC) technology, use HDMI IN 3. If not, an additional connection with DIGITAL AUDIO OUT (OPTICAL) is necessary.

4. VIDEO IN 1
   • For a composite connection, use an Analog Extension Cable (not supplied).
   

5. *IR BLASTER2**

6. REMOTE RS-232C REMOTE IR IN
   • These jacks are for receiving the external control signal. Enables extended control of the TV using RS-232C via the RS-232C and IR IN jacks.
   RS-232C: connect to the RS-232C terminal of the home controller.
   IR IN: connect to the IR out terminal of the home controller.
   • Take care to not connect to headphones or an external audio system.

1 When connecting mono equipment, connect to the L (MONO) audio jack (socket).
2 Only on limited region/country/TV model.

Installing the TV to the Wall

This TV’s instruction manual only shows the steps on preparing the installation of the TV before installing to the wall.
Your TV can be mounted on a wall using a Wall-Mount Bracket (not supplied) out of the box as packaged. If the Table-Top Stand is attached to the TV, the TV may require detaching the Table-Top Stand; see page 15 (Detaching the Table- Top Stand from the TV).
Prepare the TV for the Wall-Mount Bracket before making cable connections.
For product protection and safety reasons, Sony strongly recommends that the installation of your TV on the wall be performed by qualified professionals. Do not attempt to install it yourself.

• Follow the instruction guide provided with the Wall-Mount Bracket for your model. Sufficient expertise is required in installing this TV, especially to determine the strength of the wall for withstanding the TV’s weight.
• The length of the screw for the Wall-Mount Bracket differs depending on the Wall-Mount Bracket thickness. Please see the below illustration.
• Be sure to store the unused screws and Table-Top Stand in a safe place until you are ready to attach the Table-Top Stand. Keep the screws away from small children.

Note

• Read the supplied Safety Booklet for additional safety information.

1. Remove the screws from the rear of the TV.
2. Attach the Wall-Mount Bracket (not supplied) using the screws (not supplied).

Note
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
Detaching the Table-Top Stand from the TV
To detach the Table-Top Stand from the TV, remove the screws

Note

• Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the TV.
• Be sure the TV is vertical before turning on. To avoid uneven picture uniformity do not power on the TV with the LCD panel facing down.
• When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the original holes on the rear of the TV.

Installing the TV against a wall or enclosed area

Ventilation

• Never cover the ventilation holes or insert anything in the cabinet.
• Leave space around the TV set as shown below.

Installed with stand

Installed on the wall

Never install the TV set as follows:

Note
• Inadequate ventilation can lead to overheating of the TV and may cause damage to your TV or cause a fire.

Troubleshooting

For general troubleshooting for issues like a black screen, no sound, frozen picture, TV does not respond, or network is lost, do the following steps.

1. Restart your TV by pressing the power button on the remote control until a message appears. The TV will restart. If the TV does not recover, try unplugging the TV from the AC power cord for two minutes and then plug it in again.
2. Refer to the Help menu by pressing HELP on the remote control.
3. Connect your TV to the Internet and perform a software update.
4. Visit the Sony support website (information is provided on the front cover).
5. Perform the factory data reset. Refer to “How to reset the TV to factory settings” (page 17).

When [A new TV system software update is available…] message is displayed. Sony strongly recommends you to update the TV software by selecting [Update Now].
These software updates improve your TV performance or add new features.
The following screen with [Updating…] will appear and the illumination LED flashes white while the software is updating.

Do not unplug the AC power cord during the software update. If you do, the software update may not finish completely, and it may cause a software malfunction.
Software updates can take up to 15 minutes.
When you plug in the TV, the TV may not be able to turn on for a while even if you press the power button on the remote control or the TV.
It takes time to initialize the system. Wait for about one minute, then operate it again.
How to reset the TV to factory settings
WARNING: The reset will clear all of your customized settings including the parental lock setting.

• Turn on the TV. You can reset the TV to factory settings by pressing HOME, then selecting [Settings] – [Storage & reset] – [Factory data reset].
• To force the factory data reset, unplug the AC power cord. Press and hold both ****and – buttons on the TV, then plug in the AC power cord. Release both buttons when the illumination LED blinks in green.
• For security purposes, be sure to remove all personal and account information before discarding, selling, or passing your TV to someone else by: unlinking/unregistering,
  signing out of, deactivating all network services, as well as the factory, and resetting the TV.

Troubles and Solutions

When the illumination LED is flashing in red.

• Count how many times it flashes (interval time is three seconds).
  Reboot the TV by disconnecting the AC power cord from the TV for two minutes, then turning on the TV.
  If the problem persists, disconnect the AC power cord, and contact Sony Customer
  Support (information provided on the front cover) with the number of times the illumination LED flashes.

There is no picture (the screen is dark) and no sound.

• Check the cable/antenna connection.
• Connect the TV to AC power, and press the ****button on the TV or the POWER button on the remote control.

Some programs cannot be tuned.

• Check the cable/antenna connection.

The remote control does not function.

• Replace the batteries.

The parental lock password has been forgotten.

• Enter 4357 for the password and select [Change PIN].

The restricted profile password has been forgotten.

• Perform the force factory data reset. Refer to “How to reset the TV to factory settings” (page 17).

The TV and its surroundings become warm.

• When the TV is used for an extended period of time, the TV and its surroundings may become warm to the touch. This is not a malfunction of the TV.

Specifications

System
Television system
NTSC: American TV standard
ATSC (8VSB terrestrial): ATSC-compliant 8VSB QAM on cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality)
Channel coverage
Analog terrestrial: 2 – 69 / Digital terrestrial: 2 – 69
Analog Cable: 1 – 135 / Digital Cable: 1 – 135
Panel system
LCD (Liquid Crystal Display) Panel, LED
Backlight
Speaker output
10 W + 10 W
Wireless technology
Protocol IEEE802.11ac/a/b/g/n
Bluetooth Version 4.1

Input/Output jacks

CABLE/ANTENNA
75-ohm external terminal for RF inputs
VIDEO IN 1
Video/Audio input (mini jack)
COMPONENT IN
YPBPR (Component Video): 1080p (60 Hz), 1080i (60 Hz), 720p (60 Hz), 480p, 480i
Audio input (phono pin jack)
VIDEO IN 2
Video input (common phono pin with Y input)
HDMI IN 1/2/3/4 (Support 4K resolution, HDCP 2.2-compatible)
Video: 4096 × 2160p (60 Hz)1 2 , 4096 × 2160p (24 Hz) 1 , 3840 × 2160p (24, 30 Hz), 1080p (30, 60 Hz), 1080/24p, 1080i (60 Hz), 720p (30, 60 Hz), 720/24p, 480p, 480i, PC Formats 2 , 3840 × 2160p (60 Hz) 3 1 When 4096 × 2160p is input and [Wide mode] is set to [Normal], the resolution is displayed as 3840 × 2160p. To display 4096 × 2160p, set [Wide mode] setting to [Full 1] or [Full 2]. 2 HDMI IN 2 / 3 only. 3 Refer to the Help Guide for details.
Audio : 5.1 channel linear PCM: 32, 44.1, 48, 88.2, 96, 176.4 and 192 kHz, 16, 20, and 24 bits, Dolby Digital, Dolby Digital Plus and DTS ARC (Audio Return Channel) (HDMI IN 3 only)
(Two-channel linear PCM: 48 kHz, 16 bits, Dolby Digital, Dolby Digital Plus, DTS)
DIGITAL AUDIO OUT (OPTICAL)
Digital optical jack (Two channel linear PCM: 48 kHz, 16 bits, Dolby Digital, DTS)
HDMI 1 AUDIO IN
Analog audio input (Stereo mini jack)
AUDIO OUT (Stereo mini jack)
Headphone, Audio output, Subwoofer

USB ports 1 and 2 support High-Speed USB (USB2.0).
USB port 3 supports Super Speed USB (USB3.0).
LAN
10BASE-T/100BASE-TX connector (Connection speed may differ depending on the network environment. 10BASE-T/ 100BASE-TX communication rate and communication quality are not guaranteed for this TV.)
Home Network
Refer to the Help Guide for supported formats.
DC IN 24 V (XBR-65X900E only)
AC adapter input (24 V DC)
DC IN 19.5 V (XBR-55/49X900E only)
AC adapter input (19.5 V DC)
REMOTE
RS-232C mini jack, IR IN mini jack
These jacks are for receiving the external control signal.
*IR BLASTER1
IR Blaster Cable input (mini jack)
Others
Operating temperature
32 ºF – 104 ºF (0 ºC – 40 ºC)
Power and others
Power requirement
except for model with supplied AC adapter 110 V – 240 V AC, 50/60 Hz (U.S.A./Canada 120 V AC, 60 Hz) models with supplied AC adapter only 24 V DC with AC adapter (XBR-65X900E only) 19.5 V DC with AC adapter (XBR-55/49X900E only)
Rating: Input 110 V – 240 V AC, 50/60 Hz (U.S.A./Canada 120 V AC, 60 Hz)
Power consumption in use
XBR-75X900E: 310 W
XBR-75X850E: 219 W
XBR-65X900E: 212 W
XBR-65X850E: 174 W
XBR-55X900E: 171 W
XBR-49X900E: 155 W
in standby32
Less than 0.50 W with 120 V AC and less than 0.50 W with 240 V AC
Screen size (inches measured diagonally) (Approx.)
XBR-75X900E: 74.5 inches (75” class)
XBR-75X850E: 74.5 inches (75” class)
XBR-65X900E: 64.5 inches (65” class)
XBR-65X850E: 64.5 inches (65” class)
XBR-55X900E: 54.6 inches (55” class)
XBR-49X900E: 48.5 inches (49” class)
Display resolution
3,840 dots (horizontal) × 2,160 lines (vertical)
Output Rating
USB 1
5 V, **, 500 mA MAX
USB 2
5 V, **, 500 mA MAX
USB 3
5 V, **, 900 mA MAX

Dimensions (Approx.) with stand XBR-75X900E: 1,674 × 1,021 × 296 mm / 66 × 40 1 3 /4 × 11 /4 inches
XBR-75X850E: 1,677 × 1,032 × 284 mm / 66 1 3 1 /8 × 40 /4 × 11 /4 inches
XBR-65X900E: 1,447 × 895 × 259 mm / 57 × 35 1 1 /4 × 10 /4 inches
XBR-65X850E: 1,454 × 905 × 266 mm / 57 1 3 1 /4 × 35 /4 × 10 /2 inches
XBR-55X900E: 1,228 × 772 × 259 mm / 48 3 1 1 /8 × 30 /2 × 10 /4 inches
XBR-49X900E: 1,093 × 685 × 236 mm / 43 1 3 /8 × 27 × 9 /8 inches without stand
XBR-75X900E: 1,674 × 959 × 66 mm / 66 × 37 7 5 /8 × 2 /8 inches
XBR-75X850E: 1,677 × 968 × 53 mm / 66 1 1 1 /8 × 38 /8 × 2 /8 inches
XBR-65X900E: 1,447 × 830 × 60 mm / 57 × 32 3 3 /4 × 2 /8 inches
XBR-65X850E: 1,454 × 840 × 44 mm / 57 1 1 3 /4 × 33 /8 × 1 /4 inches
XBR-55X900E: 1,228 × 707 × 60 mm / 48 3 7 3 /8 × 27 /8 × 2 /8 inches
XBR-49X900E: 1,093 × 631 × 62 mm / 43 1 7 1 /8 × 24 /8 × 2 /2 inches wall- mount hole pattern
XBR-75X900E: 400 × 400 mm
XBR-75X850E: 400 × 300 mm
XBR-65X900E: 300 × 300 mm
XBR-65X850E: 300 × 300 mm
XBR-55X900E: 300 × 300 mm
XBR-49X900E: 200 × 200 mm wall-mount screw size (mm) M6 (length: see diagram on page 13.)
Mass (Approx.) with stand
XBR-75X900E: 35 kg / 77.1 lb.
XBR-75X850E: 35.2 kg / 77.6 lb.
XBR-65X900E: 23.2 kg / 51.2 lb.
XBR-65X850E: 22.1 kg / 48.7 lb.
XBR-55X900E: 18.1 kg / 39.9 lb.
XBR-49X900E: 13.8 kg / 30.4 lb. without stand
XBR-75X900E: 33.2 kg / 73.2 lb.
XBR-75X850E: 34.1 kg / 75.2 lb.
XBR-65X900E: 22 kg / 48.5 lb.
XBR-65X850E: 21 kg / 46.3 lb.
XBR-55X900E: 16.9 kg / 37.3 lb.
XBR-49X900E: 12.6 kg / 27.8 lb.
1 Only on limited region/country/TV model.
2 Specified standby power is reached after the TV finishes necessary internal processes.
*3 Standby power consumption will increase when your TV is connected to the network.
Note
• Optional accessories availability depends on countries/region/TV model/stock.
• Design and specifications are subject to change without notice.

Licensing Information

• The terms HDMI and HDMI HighDefinition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
• Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories.
•“BRAVIA” and, S-Force, Motionflow, BRAVIA Sync, and are trademarks or registered marks of Sony Corporation.
• Gracenote, Gracenote eyeQ, Gracenote VideoID, Gracenote Video Explore, the Gracenote logo and logotype, and the “Powered by Gracenote” logo are either registered trademarks or trademarks of Gracenote in the United States and/or other countries.
• Opera® Devices SDK. Copyright 19952016 Opera TV AS. All rights reserved.
• Wi-Fi, Wi-Fi Direct, Miracast, Wi-Fi Protected Setup, and Wi-Fi CERTIFIED Logo are trademarks or registered trademarks of Wi-Fi Alliance.Mass (Approx.) with stand XBR-75X900E: 35 kg / 77.1 lb.
XBR-75X850E: 35.2 kg / 77.6 lb.
XBR-65X900E: 23.2 kg / 51.2 lb.
XBR-65X850E: 22.1 kg / 48.7 lb.
XBR-55X900E: 18.1 kg / 39.9 lb.
XBR-49X900E: 13.8 kg / 30.4 lb. without stand
XBR-75X900E: 33.2 kg / 73.2 lb.
XBR-75X850E: 34.1 kg / 75.2 lb.
XBR-65X900E: 22 kg / 48.5 lb.
XBR-65X850E: 21 kg / 46.3 lb.
XBR-55X900E: 16.9 kg / 37.3 lb.
XBR-49X900E: 12.6 kg / 27.8 lb.

1 Only on limited region/country/TV model.
2 Specified standby power is reached after the TV finishes necessary internal processes.
*3 Standby power consumption will increase when your TV is connected to the network.
Note

• Optional accessories availability depends on countries/region/TV model/stock.

• Design and specifications are subject to change without notice. Licensing Information

• The terms HDMI and HDMI HighDefinition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

• Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories.

• “BRAVIA” and, S-Force, Motionflow, BRAVIA Sync, and are trademarks or registered marks of Sony Corporation.

• Gracenote, Gracenote eyeQ, Gracenote VideoID, Gracenote Video Explore, the Gracenote logo and logotype, and the “Powered by Gracenote” logo are either registered trademarks or trademarks of Gracenote in the United States and/or other countries.

• Opera® Devices SDK. Copyright 19952016 Opera TV AS. All rights reserved.

• Wi-Fi, Wi-Fi Direct, Miracast, Wi-Fi Protected Setup and Wi-Fi CERTIFIED Logo are trademarks or registered trademarks of Wi-Fi Alliance.

• For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, & DTS and the Symbol together are registered trademarks,
  and DTS Digital Surround is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.

• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners.

• TUXERA is a registered trademark of Tuxera Inc. in the US and other countries.

• USB-IF SuperSpeed USB Trident logo is a registered trademark of USB Implementers Forum, Inc.

|
---|---

For Your Convenience

Online Registration:| Be sure to register your TV.
United States http://productregistration.sony.com
Canada http://www.sony.ca/registration
---|---
Software Updates:| Your TV is capable of receiving software updates. For the latest information about software updates for your TV, visit:
United States http://www.sony.com/tvsupport
Canada http://www.sony.ca/support
NOTE: If your TV is connected to the Internet, you can check for software updates by pressing HELP, and selecting [System software update].

Help Guide http://rd1.sony.net/help/tv/eusltn1/h_us/

http://www.sony.net/
© 2017 Sony Corporation Printed in Mexico

References

• Patents - DTS
• Complete Your Registration (US) | Sony Product Registration en
• Help Guide | Top
• AntennaWeb - Antenna Signal Prediction
• Téléviseurs Full HD, TV upscaling HD et X-Reality PRO | Sony CA
• Complete Your Registration (CA) | Sony Product Registration
• Sony Canada
• Sony Canada
• Sony Canada
• Support for TVs, Monitors & Projectors | Sony USA 

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>