ROYAL AUDIO RA1208 Professional Battery Trolley Speaker User Manual

ROYAL AUDIO RA1208 Professional Battery Trolley Speaker

IMPORTANT SAFETY MEASURES

Before using this machine, please read all the safety and operating instructions. Please adhere to all the instructions herein, and save this information in a safe place for future use.

1. Please ensure the power cord for this unit is out of the path of foot traffic. Do not place heavy objects on the power cord as it will cause damage to the cord. Always firmly grasp the plug and pull the plug from the power supply, never yank the cable in order to pull out the plug. Avoid the use of an extension cable.
2. Ventilation: This unit should be placed in a well ventilated space where it has no less than 10cm ventilation space on either side of it. Do not cover the unit with a cloth or blanket. Do not put it on a bed, sofa, or carpet as this will stifle the ventilation of the unit.
3. Casing Dismantling: DO NOT dismantle the casing. There are no usable parts inside the unit. Make use of a service center in order to have your unit repaired.
4. Should the unit emit any smell or smoke, immediately turn off the power supply. Take the unit to the service center from which you bought it for repairs.

FEATURES

• Bluetooth & TWS Function
• Plays Mp3 files stored in SD card/USB drive/external audio device FM radio Guitar input
• Microphone inputs
• Wireless microphone included
• With remote control
• Built-in 7.4V 2200mAh 16.28Wh rechargeable battery

CONNECTING

1. This set applies to AC 11 0V~240V, 50/60Hz
2. AC power: battery can be charged when connected to AC power. Red light on battery is charging, it will change to green once bat­tery complete charge.
3. Internal battery will be charged even device switch off when plu­gged in to AC power
4. Speaker battery can be charged using 12V external car battery as well (connect cable not included) by “DC 12V input”. Please make sure “+” and “-” in right connection.
5. Adjust function keys to your personal audio preference.

BLUETOOTH INSTRUCTION

Change the mode into”BLUE”, the bluetooth sign light twinkles, and speaker will give an alarm. Ensure you enable the Bluetooth function on your Bluetooth device. Search for Bluetooth connection until you find device model and pair.

TWS CONNECTION

STEP 1 Push the Mode Button on both speakers until speakers are in Bluetooth Mode. Screen will display the word “BLUE”.
STEP 2 When both speakers are in Bluetooth mode, push and hold the TWS button for 3 seconds. You will hear a beep & screen display “bt/btst”. Next time you put both speakers in Bluetooth mode at the same time, speakers will connect automatically.
STEP 3 On your device, turn your Bluetooth settings “ON”, you will then select the unit and pair. Enjoy TWS (True Wireless Stereo) sound from your phone via Bluetooth!

BATTERY & CHARGING

1. The units takes approximately 8 hours to fully charge. It will automatically begin charging once the power cord is connected.
2. If the battery power is low may caused sound distortion or stop play, pis charging the battery on time.
3. To maximize the battery’s lifespan, please charging the battery immediately. When the unit is not used for prolonged periods of time.the battery will gradually lose its power. It is recommended to fully charge the battery at least every 30 days.
4. To saving battery, please power off once stop using.

REMOTE CONTROL

2X8″ FRONT CONTROL PANEL

1. LED MODE ADJUSTMENT

2. USB/SDITF FOLDER SELECT

3. VOLUME MASTER VOLUME ADJUST

4. NEXT*: NEXT SONG

5. PREVl44: PREVIOUS SONG

6. X-BASS ADJUST

7. G. VOL GUITAR VOLUME ADJUST

8. USBISDITFCARD SOLT

9. MIC MICROPHONE INPUT JACK

10. G.INGUITAR INPUT JACK

11. M.PRI MICROPHONE PRIORITY ON/OFF SWITCH

12. AUDIO INPUT

13. DC 12V INPUT: DC 12V CHARGING INPUT

14. POWER ON/OFF SWITCH

15. M.ECHO ECHO ADJUST

16. M.DELAYDELAY ADJUST

17. MODE: MODE SELECT

18. SCANITWS ►I: PLAY/PAUSE/TWS/FM STATION AUTOMATIC SEARCH @BT DISCONNECT

19. MIC. VOL MICROPHONE VOLUME ADJUST

20. REC: RECORDING; INSERT USB/SD CARD PRESS THIS
    BUTTON FOR RECORDING, PRESS AGAIN TO STOP AND
    PLAY RECORDING SOUND

21. REPEAT

22. EQUALIZER DISPLAY SCREEN

2X8″ REAR CONTROL PANEL

1. POWER INPUT(AC 110V-240V)
2. FM ANTENNA

2X10″ FRONT CONTROL PANEL

1. LED MODE ADJUSTMENT
2. REC: RECORDING; INSERT USB/SD CARD PRESS THIS BUTTON FOR RECORDING, PRESS AGAIN TO STOP AND PLAY RECORDING SOUND
3. SCANITWS: PLAY/PAUSE/TWS/FM STATION AUTOMATIC SEARCH
4. PREV: PREVIOUS SONG
5. NEXT: NEXT SONG
6. VOLUME MASTER VOLUME ADJUST
7. DISPLAY SCREEN
8. G. VOL GUITAR VOLUME ADJUST
9. X-BASS ADJUST
10. EQUALIZER
11. DC 12V INPUT: DC 12V CHARGING INPUT
12. AUDIO INPUT
13. USB CARD SOLT
14. POWER INPUT(AC 11 0V-240V)
15. SD/MMC/CARD CARD SOLT
16. G.INGUITAR INPUT JACK
17. MIC.2 MICROPHONE INPUT JACK 2
18. MIC.1 MICROPHONE INPUT JACK 1
19. POWER ON/OFF SWITCH
20. M.BASS BASS ADJUST
21. M. TREBLE TREBLE ADJUST
22. M.ECHO ECHO ADJUST
23. MIC. VOL MICROPHONE VOLUME ADJUST
24. M.PRI MICROPHONE PRIORITY ON/OFF SWITCH
25. REPEAT
26. MODE: MODE SELECT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution : Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>