Shenzhen Jishiyu Technology Co Ltd X10 Vehicle Wireless Charging Bracket Instruction Manual
- June 1, 2024
- Shenzhen Jishiyu Technology Co Ltd
Table of Contents
Shenzhen Jishiyu Technology Co Ltd X10 Vehicle Wireless Charging Bracket
Product Information
- Product Features:
- The glass lens emits light, showcasing high-end technology.
- Metal frame made of hardware for a brighter and stronger texture.
- Equipped with a stepping motor for silent operation and longer service life.
- Touch-sensitive bottom for a modern user experience. Built-in Farah capacitor allows retrieval of any device after power failure.
- Features FOD automatic foreign body detection and intelligent metal identification.
- Specifications:
- Product Name: X10 Car Wireless Charging Bracket
- Input: QC3.0 car charger adapter
- Output Power: 15W (Supports 10W, 7.5W, 5W)
- Applicable Mobile Phones: 4.7-6.9 inches
- Material: ABS+PC+motor+metal+silicone
- Product Dimensions: 11.97.65.8cm
- Product Weight: Net weight 138g, Gross weight 240g
Product Usage Instructions
- Charging Induction:
- Adjust the nut for clamping point support using the silica gel touch sensing technology.
- Connect the Type-C input port for charging.
- Utilize the clamp arm with the metal frame and silicone pads for stability.
- Regulate the silicone pads for proper positioning.
- Matters Need Attention:
- Use a regular car charger such as QC3.0 for optimal charging performance.
- Avoid excessive extrusion and collisions to prevent product damage.
- Avoid using the product in high-temperature and humid environments.
- Do not disassemble or assemble the product without permission to avoid damage.
FAQs
- Q: What type of car charger adapter is recommended for the X10 Car Wireless Charging Bracket?
- A: It is recommended to use a QC3.0 car charger adapter for optimal performance.
- Q: What are the supported output power levels for the X10 Car Wireless Charging Bracket?
- A: The X10 supports output power levels of 15W, with compatibility for 10W, 7.5W, and 5W charging.
- Q: What mobile phone sizes are compatible with the X10 Car Wireless Charging Bracket?
- A: The X10 is designed to accommodate mobile phones ranging from 4.7 to 6.9 inches in size.
Product features
- The glass lens emits light, which is especially high-end technology.
- Metal frame made of hardware makes the texture brighter and stronger.
- Stepping motor, silent, longer service life.
- Touch the machine at the bottom, breaking the traditional way and creating new feelings.
- Built-in Farah capacitor, after power failure and flameout, any machine can be taken.
- FOD automatic foreign body detection and intelligent metal identification.
Specification parameters
- Product Name: X10 Car Wireless Charging Bracket
- Input: QC3.0 car charger adapter
- Output power: 15W (10W 7.5W 5W is supported)
- Applicable to mobile phones: 4.7-6.9 inches
- Material: ABS+PC+ motor + metal + silicone
- Product dimensions: 11.97.65.8cm
- Product weight: net weight 138g Gross weight: 240g
Instructions
- Assemble and tighten the ball nuts of products and accessories (compatible with them Other accessories with ball head diameter of 17mm), adjust the angle and fix it in the ideal position. The location of.
- Connect the Type-c interface at the bottom of the product with the standard data cable, and the other Turn on the power port (cigarette lighter) in the car to get electricity. Product lens blue lamp Light can work normally.
- After putting on the phone, the left and right wings will automatically clamp the phone. If the phone QI wireless charging protocol is supported, and the product will start wireless charging at the same time. such as If the mobile phone does not support wireless charging the product will only clip the mobile phone with its wings, but it won’t Charge the mobile phone. The maximum charging power of this product is 15 watts, and the charging effect is good. It will be different according to the charging environment and mobile phone.
- In order to ensure the charging effect and stability, this product cannot penetrate gold.It is used to charge the mobile phone, and an excessively thick mobile phone case (larger than 3mm) cannot be obtained. To the best charging effect.
- When picking up the mobile phone, touch either of the two touch keys on the foot. Yes, the wings of the product will open automatically and the mobile phone will be removed. (It can also be straight Take the mobile phone by force, but pay attention to pressing the product to prevent the shelf from falling off) When the car is turned off and powered off, you can also touch the machine. The product has a built-in Farah. Capacitor, which can be opened and closed by touching for 1-2 times in the power-off state.
Matters Need Attention
- This product needs a regular car charger such as QC3.0 to match the charging effect.
- Please avoid excessive extrusion and collision, and the product will fail.
- It is forbidden to use products in high-temperature and humid environments.
- Do not disassemble and assemble the product without permission.
FCC
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2)this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used by the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimetres from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.