HopeChart HH4V-152600-1000-10 Electronic Fence Receiver User Manual
- June 1, 2024
- HopeChart
Table of Contents
HopeChart HH4V-152600-1000-10 Electronic Fence Receiver
Product Information
Specifications:
- Size: Various components with different sizes
- Material: ABS and PC
Product Usage Instructions
Assembly:
Assemble the components in the following order:
- Attach the Upper Cover to the Lower Shell.
- Insert the Button into the Upper Cover.
- Add the Decorative Ring for aesthetics.
Connector Pin Definition:
The Micro USB Pin Definition is as follows:
- VBUS
- D-
- D+
- ID
- GND
Buzzer Working Condition:
Refer to the Indicator Light Status Description for various scenarios:
| Serial Number | Indicator Light | Status Description |
|---|---|---|
| 1 | Charging Indicator Light | – |
| 2 | Power Indicator Light | Green light on when power is on, flashing red light |
for low battery, solid green for fully charged.
Product Nameplate:
The product nameplate contains FCC ID and a QR code label for identification
purposes.
Frequently Asked Questions (FAQ):
-
Q: What should I do if the power indicator light is not turning on?
A: If the power indicator light is not turning on, ensure that the device is charged properly. If the issue persists, contact customer support for assistance. -
Q: Can the device be used in extreme temperatures?
A: It is advised not to use the device in high or low extreme temperatures to prevent any risks of fire or explosion.
Product Description
Size
Material
Serial number| name| quantity| Material Science|
Colour
---|---|---|---|---
1| Button| 1| ABS+PC| Black (matte pattern)
2| Upper cover| 1| ABS+PC| Black (matte pattern)
3| Decorative ring| 1| ABS| Matte silver (electroplating)
4| Lower shell| 1| ABS+PC| Black (matte pattern)
Connector Pin Definition
Micro USB Pin Definition
1| 2| 3| 4| 5
VBUS| D-| D+| ID| GND
Buzzer working condition
Indicator light status description|
---|---
Serial number| indicator light| Shut down| Bluetooth not connected when turned
on| Bluetooth connected when turned on| Power on low battery| Charging| Fully
charged
1| Charging indicator light| /| /| /| /| on shaky ground| Green light on
2| Power indicator light| Not lit| on shaky ground| Green light on| Flashing
red light| /| /
Product nameplate
- FCC ID: 2A2NKHQB204 S01 023
- QR code label (88mm PET material) QR code image (6.56.5mm) (Bluetooth MAC address: XX: XX: XX: XX: XX: XX: XX: Generate QR code)
Technical parameters
- Working voltage range: DC 5V ± 0.25V, battery voltage 3.5V~4.2V, capacity 120mAh; Charging interface micro USB;
- Lora E.I.R.P ≤23dBm communication frequency: 905.25MHz 921.5MHz
- Working temperature: 20~35 ℃, storage temperature: 20~70 ℃
- USB input current: 5Vdc0.5A.
- Adapter input specifications: 100 240V, 50 60Hz, 1A; Adapter output specification: 5V/500mA
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and meets applicable limits for radio frequency (RF) SAR when used on body and Limb. The highest reported extreme SAR value is 0.18 W/kg and the body SAR value is 0.68 W/kg.
MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device.
- replacement of a battery with an incorrect type that can defeat a safeguard (for example in the case of some lithium battery types);
- disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion:
- leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
- a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
Risk of fire or explosion if the battery is replaced by an incorrect type Do not used in high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation;