Xcessories Hub WX001-LY Wireless Charge Power Bank User Manual

Xcessories Hub WX001-LY Wireless Charge Power Bank

Specifications

• Model: XYZ-1000
• Dimensions: 10 x 5 x 3 inches
• Weight: 2 lbs
• Power: 120V AC
• Frequency: 50-60 Hz

FAQ

• Q: Is the XYZ-1000 suitable for outdoor use?
  • A: No, the XYZ-1000 is designed for indoor use only and should not be exposed to outdoor elements.
• Q: Can I use the XYZ-1000 with a power converter for international travel?
  • A: It is recommended to check the device’s compatibility with power converters before use. Using incompatible converters may damage the device or pose a safety risk.

Using Instructions

Wireless charger is a convenient, easy-to-use, safe, and reliable charging method, but there are still some issues and details that need to be paid attention to during use to ensure the effectiveness and safety of the charger.

The usage method of wireless charger is as follows:

1. Connect a charger larger than 9V2A (charging head above 18W can be used) to a power outlet and connect a data cable.
2. Connect the USB Type-C end of the data cable to a wireless charger.
3. Please place the rechargeable area of the phone with wireless charging function in the center of the surface of the wireless charger, and the phone will display charging.

Note

• Please refer to the phone manual for the rechargeable area of the phone.

When using a wireless charger, the following aspects need to be noted:

1. The wireless charger should be placed in a flat and non slip area to avoid uneven or sliding placement that may affect the charging effect.
2. The receiver of a mobile device should be kept at a certain distance from the transmitter of the wireless charger. When other obstacles appear between the receiver and the transmitter, it will affect the transmission and reception effect of electromagnetic waves.
3. It is not recommended to use mobile devices while charging, as this will affect the charging effect and increase the risk of mobile device heating.
4. When using a wireless charger, it is recommended to use the original charger or a charger with relevant standard certification to ensure the safety and reliability of the charger.
5. When the wireless charger is connected to the power supply, do not place metal in the charging area.

Wireless chargers also have some issues that people who are sensitive to electromagnetic radiation should pay attention to. For people who are sensitive to electromagnetic radiation, it is recommended to reduce the usage time of wireless chargers or choose low radiation chargers for charging.

When using a wireless charger, the following points should be noted:

1. It is necessary to choose the charging power and current of the charger based on the needs of the mobile device to avoid not meeting the charging needs of the mobile device or causing damage to the mobile device due to overcharging.
2. When charging, it is necessary to maintain good contact between the wireless charger and the mobile device to ensure the transmission and reception of electromagnetic waves, while also ensuring stable and fast charging.
3. When using a wireless charger, it is necessary to pay attention to the charging time to ensure the long-term use of mobile devices and battery life.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>