Haier HDW1618DNPD Total No Frost Fridge Freezer Instructions
- June 1, 2024
- Haier
Table of Contents
Haier HDW1618DNPD Total No Frost Fridge Freezer
Product Information
Specifications
- Width: min. 920mm
- Depth: min. 1137mm
- Frequency rate: 2400MHz-2843.5MHz
- Channel frequencies: 2412…2472 MHz (step size 5 MHz)
- Maximum power (EIRP): 100 mW
Product Usage Instructions
Power On/Off and Temperature Control
-
Plug in the appliance to turn it on automatically. To change the temperature, press the mode key with the fridge door open.
-
The LED light will indicate the selected temperature level. An acoustic signal confirms each temperature change.
-
In case of power loss, the last cooling level set will be restored.
Fine Tuning
- The fine-tuning mode allows setting temperatures by sub-levels.
- Each temperature level has three sublevels. To use fine-tuning, follow the instructions provided in the manual.
Holiday Function
- Activate the Holiday function when the appliance will not be used regularly.
- This function turns off the LED lights in the fridge (even with the door open) to reduce power consumption while keeping the freezer working normally.
Defrosting
- The refrigerator and freezer compartments defrost automatically without the need for manual operation.
App Connection
- To pair the appliance with the app, follow the step-by-step procedure outlined in the manual.
WiFi Use
- To activate Wi-Fi, long press the mode key for 2 seconds.
- The Wi-Fi icon will turn on, indicating the connection status.
- Refer to the manual for detailed Wi-Fi configuration instructions.
Frequently Asked Questions
Q: How do I restore default settings on the appliance?
A: To restore default settings, ensure the screen is lit, then press and hold the TEMP button followed by pressing the ON/OFF button five times within five seconds.
Q: How does the Holiday function work?
A: The Holiday function reduces power consumption by turning off LED
lights in the fridge while keeping the freezer operational.
Activate this function when the appliance will not be used regularly.
PRODUCT DESCRIPTION
- Control panel and light
- Movable Shelves
- Crisper
- Freezer drawers
- Balconies
- Levelling feet
- The most energy-saving configuration requires drawers, food box and shelves to be positioned in the product, please refer to the above pictures.
- The pictures above are only for reference. The actual configuration will depend on the physical product or statement by the distributor.
Space requirements
- The unit’s door must be able to fully open as shown. Spare enough space for convenient opening of the doors and drawers.
- Keep a distance of at least 50 mm between the side walls of the product and adjacent parts.
- Width: min. 920 mm
- Depth: min. 1137 mm
USE
- ON/OFF key, used to switch on/off the appliance.
- Mode key, used to select the fridge temperature or the special functions like.
- WiFi Icon, shows if the appliance is connected to the app.
- Super Cool Icon, shows if the function is activated.
- Temperature levels, show which is the selected temperature.
Use
- Plug on the appliance. The appliance will turn on automatically.
- The temperature will automatically set at 4 °C in the fridge and -18 °C in the freezer.
- To change the temperature, with the fridge door open, press the mode key. When the setting increases, the corresponding LED light will turn on. An acoustic signal is made every time the mode key is pressed and the temperature is changed.
- In case of power loss, the last cooling level set will be restored.
- To restore the default setting, at the screen lit, keep pressed the TEMP button, and then press ON/OFF button 5 times in 5 seconds.
- Under the normal operating condition (in spring and autumn), it is recommended to set the temperature at 4 °C. In summer when the ambient temperature is high, it is recommended to set temperature at 6~8 °C, so as to guarantee the fridge and freezer temperatures and reduce the refrigerator continuous running time; and in winter when the ambient temperature is low, it is recommended to set temperature at 2~4 °C to avoid frequent start/stop of the refrigerator.
Customized temperature
- From the app, it is possible to customize the temperature of the fridge compartment. The temperature can be set with 1 °C sensitivity and it is possible to select a temperature from 2 °C to 8 °C in the fridge.
- An acoustic signal is made every time the temperature is changed. When the temperature is selected by the app, there is no indication on the control panel, all the temperature LED lights are turned off, while only the WiFi icon is turned on.
Fine Tuning
- The fine tuning selection mode gives to possibility to set the temperatures by sublevels; each temperature level has three sublevels.
How to use the fine tuning function:
- Press the mode key for 8 seconds to enter fine tuning selection mode. When the appliance enters the mode, an acoustic signal is made and the LED of currently selected cooling level blinks.
- By short pressing the mode key within 5 seconds, the fine tuning setting increases and, at each pressing, an acoustic signal is made.
- During fine tuning, the LED of the selected cooling level is fixed, while the LED of the selected sublevel blinks.
- If no key is pressed for 5 seconds, the system automatically exits from fine tuning selection mode. The fine tuning setting is saved and the LED of the selected fridge temperature is fixed.
- If the fine tuning is activated again, the setting will start from the previously stored level.
Super Cool function
- It is suggested to switch on the Super Cool function if a large quantity of food should be stored (for example after the purchase).
- The Super-Cool function accelerates the cooling of fresh food and protects the goods already stored from undesirable warming.
- When the function is activated, the temperature of the fridge is automatically set at 2 °C.
How to use the Super Cool function:
- The function can be activated by pressing many times the mode key until the Super Cool LED is turned ON or by selecting it from the app.
- If the function is activated, the corresponding icon on the control panel will be turned on.
- To exit the Super Cool function, press the mode key again.
- The Super Cool function automatically ends after 30 hours running.
- When the Super Cool ends, the corresponding icon of the control panel turns off and the previously set cooling level is restored.
Super Freeze function
- The super freezing function accelerates the freezing of fresh food and protects the goods already stored from undesirable warming.
- If a large amount of food has to be freeze, it is recommended to set the Super Freeze function on 24h before the usage.
- When the function is activated, the temperature is automatically set at -25 °C.
How to use the Super Freeze function:
- The function can be launched only by selecting it from the app. If the function is activated, it will be shown by the app; there is no indication on the control panel.
- To exit the Super Freeze function, turn it off from the app.
- The Super Freeze function automatically ends when the function has lasted for more than50 hours.
Eco mode
- The Eco mode can be activated to optimize the performance of the appliance, whereas obtaining the best food storage.
- When the function is activated, the temperature is automatically set at 5 °C in the fridge, and at -18 °C in the freezer.
How to use the Eco mode:
- The function can be activated only by selecting it from the app. If the function is activated, it will be shown by the app; there is no indication on the control panel.
- To exit the Eco mode, turn it off from the app; the previously selected temperature will be restored.
- The Eco mode automatically ends when another function is chosen from the control panel.
Holiday function
- The Holiday function can be used to reduce the energy consumption of the appliance, when it is not used regularly.
- The function will turn off the LED lights (even if the door is open) and the fridge will work on low power consumption mode), whereas the freezer will keep working normally.
How to use the Holiday function:
- The function can be activated only by selecting it from the app. If the function is activated, it will be shown by the app; there is no indication on the control panel.
- To exit the Holiday function, turn it off from the app; the previously selected temperaturewill be restored.
- The Holiday function automatically ends when another function is chosen from the control panel.
- Defrosting The defrosting of the refrigerator and freezer compartment are done automatically: no manual operation is needed.
- HCS When a certain moisture level is reached, the HCS filter fibers open causing moisture to decrease and then close again.
- Demo mode Keep the refrigerated door open, press and hold the on / off key, and click the set key five times.
- The refrigerator will enter the Demo mode.
- To exit the mode, keep pressed the door switch and press again the SET key for 5s. Error codes If – 6 °C LED light is flashing, it means there has been a fan error.
- Please, contact the technical assistance to help solve the problem
APP CONNECTION IN APP
PAIRING PROCEDURE
- Step 1
- Download the hOn app on the stores
- Step 2
- Create your account on the hOn App or log in if you already have an account
- Step 3
- Follow pairing instructions in the hOn App
WiFi Use
- To activate the Wi-Fi, long press the mode key for 2 seconds, the Wi-Fi icon will turn on and an acoustic signal is made.
- If the Wi-Fi has not been configured yet, when the refrigerator turns on, it will automatically enter the configuration mode and keep this status for 30 minutes. To use the configuration mode:
- Press the mode key for 2s but less than 8s, the refrigerator enters the Wi-Fi configuration mode and an acoustic signal is made. The Wi-Fi icon starts blinking.
- Follow in app instructions to configure the Wi-Fi (see above).
- Once the Wi-Fi is configured and the connection established, the Wi-Fi icon is on and fixed.
- After 30 minutes without performing any operation, the Wi-Fi will automatically exit the configuration mode.
- If the Wi-Fi has already been configured, it will automatically reconnect according to the configuration information.
Radio-module – Technical data
| Frequency rate (OFR) | 2400 MHz-2843.5 MHz |
|---|---|
| Channel frequencies | 2412…2472 MHz(step size 5 MHz) |
| Maximum power(EIRP) | 100 mW |
Radio equipment type is in compliance with Directive 2014/53/EU.
DOOR REVERSIBILITY
Tools needed: Electric screwdriver
- Remove the top hinge cover
- Unscrew the top hinge
- Remove the top hinge cover (left)
- Remove middle hinge
- Remove lower hinge
- Mount hinge foot
- Mount middle hinge
- Mount the upper hinge plate
- Mount the upper hinge cover
Read User Manual Online (PDF format)
Loading......