Cheng Dian TP-1 3 In 1 Function Video Remote shutter and Phone Holder Bluetooth Connection User Manual
- June 16, 2024
- Cheng Dian
Table of Contents
- Cheng Dian TP-1 3 In 1 Function Video Remote Shutter and Phone Holder
- Specifications
- Bluetooth connection
- Use diagrams
- TURN ON
- Connect mobile phone
- Mobile phone stand
- Button function
- Take photos and record videos
- Charging diagram
- Parameter
- FAQ
- FCC
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Cheng Dian TP-1 3 In 1 Function Video Remote Shutter and Phone Holder
Bluetooth Connection
Specifications
- Compliance: Part 15 of the FCC Rules
- Radiation Exposure: Meets FCC radiation exposure limits for an uncontrolled environment
- RF Exposure: Can be used in portable exposure conditions without restriction
Bluetooth connection
NOTE : About iPhone In the case of Los you must make the following settings before connecting to Bluetooth
About iPhone Special reminders for iPhone users : Open the iPhone
Settings – Accessibility Touch
Assist Control is set to open state as shown below:
About iPhone until the following icon appears rsSpeci al reminders for
iPhone user
Open I Phone Settings – Accessibility Touch Assistive Touch set it to on See
below:
until the following icon appears
WARNING: You need to make sure the 10S software is above V14.8 5.
PACKAGE
Use diagrams
TURN ON
Press and hold the middle button for 1 second till the blue light turn on
Connect mobile phone
In the off stale, press and hold the middle for 1 second till the blue light flashes rapidly, the controller is in a pairing state, then turn on the Bluetooth of the mobile phone and search for the mobile phone, the Bluetooth menu shows: TP-1 and click to complete 1he Bluetooth connection. If you can’t find it, please try to turn off the mobile phone’s Bluetooth and 1urn it on again until the connection is complete
Turn on your mobile phone, the controller will automatically connect to the last mobile phone you connected before {make sure the Bluetooth of the mobile is turned on)
Mobile phone stand
Take the bottom shelf slides out as the phone stand
battery level display for the charging case
Button function
Take photos and record videos
In photo or video mode, press and hold any of these 2 keys will start or end taking pictures or video recording Short press the middle button to focus
Low battery warning
- Controller When the battery is low, the red light flashes slowly
- Charging box When the battery is low, the blue light flashes slowly
Charging diagram
Automatic shutdown function
- Normal pairing or disconnecting from the mobile phone to enter 1he pairing,lf the mobile phone is not connected within 5 minutes, it will automatically shut down
- If there is no operation after 30 minutes it will automatically shut down
Parameter
Remote controller
Bluetooth version
| Ver.5.0
l,aasmHpowc,
| class(-6dBm- +4dBm)
Frequency (Hz)
| 2.40GHz 2.48GHz
Bluetooth, name
| TP l
P8S9’N0rd
| 0000
distance
| !Om
battery capacity
| 25mAH
charging time
| lh
Charging box
battery capacity|
200mAH
charging time
| l.Sh
FAQ
Frequently Asked Questions (FAQ)
-
Q: Why it doesn’t work or scroll?
Please check: if there are any of the following problems -
1. We’re asking you to try using one opposite the direction Ring.
- a) When you Just open TlkToK. It will refresh when you press the up button for the first time.
- b) Then if you need to watch the next video, just press the down button.
- c) If you need to go back to the previous,;s video. press the up button.
- d) When you 90 back lo the lir”11 video, press the up button, and it will refresh again.
- e) Press the down button again, and other new videos will appear. So please note the direction of the scroll remote ring use.
-
2. Make sur11 your phone has been connected to the n1moh1 ring via bluetooth, if your phone i11 an iPhone, you also need to pay attention to the following issues
- a) The 11sslst1ve touch button must be turned on when using the iPhone or iPad, II WIii leave a circle on the screen all the time
- b) The specific settings: open Settings>Acceuibitity>touch>turn on Assislive touch
- c) You need to make sure the 10S scnware is above V14_,8_5
-
Q: Can it work on a Kindle?
- A: It doesn’t work for Kindle devices, But it can work for Kindle App.
-
Q: Can it create TikTok videos?
- A: Can not, II can’t b11 u11ed lo creat11 videos, it can scroll up and down lie video, like video&, adjust the volume. And you C11noontrol your phone to take photos and videos remotely.
-
Q: Can It be used to start and stop “live on Ttlc: Tok?
- A: It can’t !I.tart 1md stop “ll’Je” on TikTok.
-
Q: Does this phone remote control also work for Facebook 11nd Instagram?
- A: It doesn’t work: for Facebook: and Instagram.
-
Q: Does work with Spotify?
- A: It doesn’t work for Spotify.
The iOS system cannot utilize the user manual
When the up or down buttons on the remote control for the iOS system are not
functi oning, please follow the steps below for troubleshooting.
Adjust the slider to position the screen cursor closer to the center of the screen. Note: lf the cursor is positioned in the top left corner or bottom right corner of the screen, it can cause the remote control function to malfunction.
In the novel app mode, when pressing the down button, if the content scrolls too quickly, you can adjust the slider closer to the turtle icon to slow down the scrolling speed
FCC
FCC Warnning
This equipment has been tested and found to comply with the limits for a Class
B digital device, according to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used under the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference e to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution : Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>