Schneider Electric XB4F Selector Switch Harmony Instruction Manual
- May 15, 2024
- Schneider Electric
Table of Contents
Schneider Electric XB4F Selector Switch Harmony ****
DANGER
HAZARD OF ELECTRIC SHOCK
- Install the product following the installation conditions described below.
- Hole shape and diameter, tightening torques and spacer orientation must comply with these instructions.
- The accessory ZB5AZ905 must be used to tighten the nut.
- Ground the XB4F / ZB4F when installed on isolating support
Failure to follow these instructions will result in death or serious injury.
Electrical equipment should be installed, operated, serviced, and maintained
only by qualified personnel.
No responsibility is assumed by Schneider Electric for any consequences
arising out of the use of this material.
Installation Instruction
XB4F / ZB4F
0,8 Nm / 7.5 lb-in (maxi 1,2 Nm / 10.6 lb-in)
XB5F / ZB5F
For use on flat surface of a type 4, type 4X, type 12, and type 13
Customer Support
For EU Declaration of Conformity see: www.schneider-electric.com
References
Read User Manual Online (PDF format)
Loading......