Meble Furniture VARIANT-1 Haifa TV Stand Instruction Manual
- June 1, 2024
- meble FURNITURE
Table of Contents
Meble Furniture VARIANT-1 Haifa TV Stand
Specifications
- Weight Capacity: 30 kg
Product Usage Instructions
Step 1
- Follow the provided diagram to identify and organize all the components needed for assembly.
Step 2
- Begin by assembling Variant-1.2.3.4 by following the provided instructions for attaching the components using the specified screws and tools.
Step 3
- Continue with the assembly process for Variant-1, ensuring all components are securely attached.
Step 4
- Attach the necessary components for Variant 1 according to the provided diagram.
Step 5
- Install the designated parts for Variant-1 as per the instructions provided.
Step 6
- Proceed with attaching the components for Variant-1, ensuring proper alignment and secure fastening.
Step 7
- Complete the assembly of Variant-1 by attaching the remaining parts as instructed.
FAQ
- Q: Are additional tools required for assembly?
- A: No, all necessary tools, including an IMBUS key, are provided with the product.
- Q: What is the weight capacity of each variant?
- A: All variants have a weight capacity of 30 kg.
- Q: Can the TV stand be disassembled for moving?
- A: Yes, you can disassemble the TV stand following the assembly instructions in reverse order for easy moving or storage.
Introduction
ATTENTION: DO NOT RETURN THIS PRODUCT!!! PLEASE READ THE FOLLOWING!!!
- FOR REPLACEMENT/MISSING PARTS: www.meblefurniture.com/parts.
- FOR INSTRUCTION/ASSEMBLY MANUALS AND VIDEOS: www.meblefurniture.com/assembly.
- ALL OTHER INQUIRIES: help@meblefurniture.com.
IF YOU ARE MISSING PARTS OR YOUR PRODUCT ARRIVED DAMAGED: Please fill out a
parts request form at
www.meblefurniture.com/parts.
Replacement parts are shipped out in one business day. You will receive a
tracking number via email once your parts request has been processed.
IF YOU ARE MISSING AN INSTRUCTION MANUAL OR NEED ASSEMBLY HELP
- Please visit www.meblefurniture.com/assembly to access our library of product assembly videos or to download product instruction manuals.
NOTICE REGARDING HIGH GLOSS PROTECTIVE FOIL AND PRODUCT CARE
- After removing the protective foil from the gloss fronts, the acrylic surface of the boards is still soft and easy to scratch.
- With air contact, the hygroscopic acrylic layer hardens, and the board becomes more resistant to scratches.
- It takes approximately 48 hours for the acrylic layer of the board to fully harden.
- DO NOT CLEAN, WIPE, OR POLISH THE ACRYLIC FRONTS FOR 48 HOURS AFTER REMOVING THE PROTECTIVE FOIL!
WARNING
PARTS
Installation Instructions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>