PU200G 11517L Patterned Garden Gloves User Guide
- June 1, 2024
- PU200G
Table of Contents
PU200G 11517L Patterned Garden Gloves
Product Information
Specifications
- Standards: EN388:2016+A1:2018, EN ISO 21420:2020
- Model: PU200G 3142X
- EU PPE Directive Compliance: 2016/425/EU
- Resistance Levels: Abrasion (3), Cut (1), Tear (4), Puncture (2), Cut (X)
Product Usage Instructions
-
Safety Precautions
Before using the product, ensure you read and understand all safety instructions provided in the user manual. -
Product inspection
Inspect the gloves for any damage or defects before each use. Do not use it if any issues are found. -
Putting on the Gloves
Slide your hands into the gloves one at a time, ensuring a snug fit without restricting movement or blood circulation. -
Proper Use
Use the gloves for their intended purpose only. Avoid contact with sharp objects or chemicals that may damage the material. -
Cleaning and Maintenance
Refer to the user manual for specific cleaning instructions. Regularly clean and maintain the gloves to ensure longevity and performance.
Frequently Asked Questions
Q: How do I determine the correct size for the gloves?
A: Please refer to the sizing chart provided by the manufacturer to select the appropriate glove size based on your hand measurements.
Q: Can these gloves be used for handling chemicals?
A: These gloves are not designed for chemical handling. Please use appropriate gloves specifically rated for chemical resistance.
Q: Are these gloves suitable for use in extreme temperatures?
A: These gloves have specific temperature ratings. Refer to the product specifications to determine if they are suitable for extreme temperature conditions.
Introduction
This product meets the requirements of the EU PPE Directive 2016/425/EU, furthermore, it is tested to the European Standard EN 420. This product applies to all kinds of protection in respect of physical and mechanical aggressions caused by abrasion, blade cut, puncture and tearing, palm protection style only. Read and understand this guide carefully before the usage of the safety gloves to get full protection. In every case, you need to size the user’s palm size into the size of the gloves to get an appropriate protection against mechanical aggressions and risks caused by abrasion, blade cut, puncture and tearing. Use only on clean and dry hands. Only the intact, unwounded, dry safety gloves can be used, offering complete protection. Workplace conditions (ergonomics, temperature, wet or dry, etc.) can affect the final glove performance and can differ from the standard previous experiments.
Warning:
Do not wear protective gloves in front of or near moving, hazardous machines
that can be harmful to your hands. These gloves and any other gloves will not
protect you from all hazards under all conditions.
Material: polyester, polyurethane,
Security level
- EN388 standard: 3142X
- Abrasion resistance: 3
- Blade cut resistance: 1
- Tear resistance: 4
- Puncture resistance: 2
- Blade cut resistance: X
Check the condition of the gloves before every usage. If the gloves are mechanically damaged do not use them, immediately change your protective gloves.
Storage
Store in a cool, dry place. Do not place your gloves in direct sunlight or any kind of direct heat source.
Maintenance
Wet handling (washing, etc.) is prohibited. Do not bleach! Dryer use is prohibited! Do not iron! Do not use chemicals for cleaning!