LG MR Series Magic Remote Control Instructions

LG MR Series Magic Remote Control

Instructions

To use the Magic Remote, you must first pair the remote with your TV(Registering the Magic Remote Control)
Step 1) Put batteries into the Magic Remote and turn the TV on by pressing the power button on the remoter.
Step 2) Point the Magic Remote at your TV and press the Wheel(OK) on the remoter control, Then follow the prompts on screen to complete the process.
Important: If your Magic Remote will not register to your TV, you might need to restart the process, If the problem persists, please follow the steps below on how to De-register the remote from your TV so that you can re- register it again.

HOW to Deregister your Magic Remote

Press the “Back” and “Home” buttons at the same time for five seconds, to un- pair the Magic Remote from your TV.

HOW to Re-register your Magic Remote

Press and Hold the “Home” and “Set” buttons at the same time for more than five seconds to disconnect and re-register the Magic Remote. Your remote should now be paired, If not, point the Magic Remote at your TV and press the Wheel(OK)on the remote control, The remote should now be registered to the TV. Please try these steps several more times if it does not register.

Specifications

• Product Name: LG MR Series Magic Remote
• Battery Type: Alkaline batteries
• Compatibility: TV
• Regulatory Compliance: FCC Part 15

Registering the Magic Remote Control

1. Insert brand-new alkaline batteries into the Magic Remote.
2. Turn on the TV by pressing the power button on the remote.
3. Point the Magic Remote at the TV and press the Wheel (OK) button on the remote control.
4. Follow the on-screen prompts to complete the registration process.

Deregistering the Magic Remote

To unpair the Magic Remote from the TV:

• Press and hold the Back and Home buttons simultaneously for five seconds.

Re-registering the Magic Remote

To disconnect and re-register the Magic Remote:

• Press and hold the Home and Set buttons simultaneously for more than five seconds.
• If needed, point the Magic Remote at the TV and press the Wheel (OK) button to complete registration.
• If registration fails, repeat the process multiple times.

If the TV continues to fail Register the Magic Remote Control
Please Note: Only 1 Magic Remote can be registered to the TV, If you still have your old remote, you need to un-pair it. Press the “Back” and “Home” buttons at the same time for five seconds to un-pair, Then, Remove the batteries in the
unwanted remote, unplug the TV for 60 seconds, plug the TV back in, Get your new remote, and start the registering process again. Start at step 1 above. Important if you cannot get the remote to work, please email us your full TV model number before returning, we can usually help!

Troubleshooting

If you encounter issues during pairing, follow these steps:

• If you see the message “This Remote Is Not Supported By This TV,” contact customer support for assistance.
• If further help is needed, provide your TV model number to customer support for troubleshooting.
• From the Amazon toolbar select “Returns and Orders”, then select the order and click Contact Seller or Get Help
• Click on the word “select” beneath the items pictured
• When prompted (several times) about what you need help with, select “OTHER” or the word “None of these”
• When you see the message box, please tell us your issue and TV model number.
• Please allow us to help you and possibly avoid a return.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning
changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment The devices have been evaluated to meet general RF exposure requirements the device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>