evilspeed F355 Works Bell Boss Kit User Guide

evilspeed F355 Works Bell Boss Kit User Guide

Instructions for the Works Bell boss kit Ferrari F355 Installation:

1. Begin by ensuring the vehicle’s battery is turned off. Locate the battery cutoff switch inside the compartment and toggle it off to disconnect the battery.
2. Identify the two holes on the back of the steering wheel, one on each side. These holes contain Allen screws holding the airbag in place.
3. Use a specialty tool, a T30 safety Torx wrench, preferably attached to a quarter-inch ratchet with an adapter. Alternatively, a full 3/8 drive can be used. Carefully insert the tool into the holes to loosen and remove the Allen screws securing the airbag.
4. Once the Allen screws are undone, the airbag will pop off via springs. Gently remove the airbag, taking care not to damage the wires connected to it. Ensure the battery remains disconnected throughout this process.
5. Unplug the harnesses connected to the airbag by gently pulling the plug straight out. Avoid rocking it from side to side. With the airbag removed, access to the steering wheel is granted.
6. Identify and unplug the horn buttons carefully. Disconnect any ground wires if present.
7. Using a 5mm Allen wrench or socket, remove the bolts securing the steering wheel in place. Keep track of these bolts for reassembly later.
8. Once the bolts are removed, carefully lift off the steering wheel. Ensure no wires remain attached.
9. To install the Works Bell boss kit, attach any components removed in the reverse order. Ensure all wires are properly connected and tucked away.
10. Position the Works Bell boss kit onto the column and secure it with the previously removed bolts.
11. Connect the horn button and airbag resistor wires, which are included in the boss kit.
12. Install the aftermarket wheel with the horn button.
13. Once everything is securely in place, toggle the battery cutoff switch back on to reconnect the battery.
14. Test the functionality of the steering wheel components, including the horn and any additional features.
15. Congratulations, you have successfully removed and/or replaced the steering wheel on your Ferrari F355.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>