LG 65QNED85TUA Quantum Dot NanoCell 4K UHD LED TV User Manual

: June 1, 2024
: LG

Table of Contents

Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LG 65QNED85TUA Quantum Dot NanoCell 4K UHD LED TV User Manual

**Microphone

**

Power Tums the TV on or off.
Accesses the [Guide].
(Dash) Inserts a-between numbers such as 2-1 and 2-2.
LIST Accesses the saved channel list.
QUICK ACCESS Accesses the [Edit Quick Access).
[Edit Quick Access) is a feature that allows you to enter a specified app or Live TV directly by pressing and holding the number buttons.
Volume buttons Adjusts the volume level.
Home Accesses the Home menu.
Home Launches the last used apps.
Wheel (OK) Press the center of button to select a menu. You can change channels by using button.
Wheel (OK) Accesses the [Magic Explorer). You can run the (Magic Explorer) feature when the pointer color is changed to purple. (However, some apps may not support this feature.).
Up/Down/Left/Right Press the up, down, left or right button to scroll the menu. If you press **buttons while the pointer is in use, the pointer will disappear from the screen and Magic Remote will operate like a general remote control. To display the pointer on the screen again, shake Magic Remote to the left and right.
Back Returns to the previous level.
Back The screen displayed on the TV is closed and the home menu appears
Number buttons Enters numbers.
Accesses the [Quick Help).
More actions Displays more remote control functions.
AD/SAP” SAP (Secondary Audio Program) feature can also be enabled by pressing the button.
Channel buttons Scrolls through the saved channels.
Mute Mutes all sounds.
Mute Accesses the [Accessibility) menu.
Voice recognition Network connection is required to use the voice recognition function.
Check for recommended content. (Some recommended services may not be available in some countries.)
Voice recognition Speak while pressing and holding the button to use the voice recognition feature.
Input Changes the input source.
Input Accesses the [Home Hub].
Q. Settings Accesses the Quick Settings.
Q. Settings Displays the All Settings menu.
These access special functions in some menus.
Red button Runs the record function.
Various services button** Connects to various services such as streaming and voice search.

The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly.
This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote sensor.
(Some buttons and services may not be provided depending upon models or regions.)

How to register the Magic Remote Control
To use the Magic Remote, first pair it with your TV.

Put batteries into the Magic Remote and turn the TV on.
Point the Magic Remote at your TV and press the the remote control. Wheel (OK) on

If the TV fails to register the Magic Remote, try again after tuming the TV off and back on.

How to deregister the Magic Remote Control
Press the **(Back) and ****(Home)** buttons at the same time, for five seconds, to unpair the Magic Remote with your TV.

Press and hold the (Home) and **( Q. Settings** ) buttons for more than 5 seconds to disconnect and re-register the Magic Remote at the same time.
It is recommended that an Access Point (AP) be located more than 0.2 m (0.65 ft) away from the TV. If the AP is installed closer than 0.2 m (0.65 ft), the Magic remote control may not perform as expected due to frequency interference.

Using Always Ready
(Depending upon model)
You can operate the TV and connect to Bluetooth with direct voice recognition while the power is off.

[General] [Always Ready], setting [Enable the function] to on.
Pressing the button while watching TV switches the screen to [Always Ready) that is turned on, and pressing the button once more turns the screen to [Always Ready] that is turned off.
Press the **(Home) button or the ****(Back)** button to watch TV when the screen is in [Always Ready] that is turned on.
Press the Wheel (OK) button to display the wallpaper when the screen is in [Always Ready] that is turned off, and press the button to watch TV.

Note

Using Always Ready may increase energy consumption.
For more information about the feature, refer to the → [Support][User Guide] [Troubleshooting]→ [Learn More About Always Ready].

Connecting Smart Devices using NFC Tagging
NFC is technology that uses Near Field Communication (13.56 MHz), allowing you to conveniently send and receive information without separate settings. By bringing a smart device near the NFC-enabled remote control, you can install the LG ThinQ app and connect the device to the TV.

Turn on NFC in the smart device’s settings. To use NFC with Android devices, set the NFC option to enable ‘read/write tags’ in the smart device’s settings. The NFC settings may vary depending upon the device.
Bring the smart device near the R (NFC) on the remote control. The required distance for NFC tagging is about 1 cm (0.39 inches).
Follow the instructions to install the LG ThinQ app on your smart device.
Retagging the smart device to the remote control allows you to conveniently access various features on the connected TV through the LG ThinQ app.

Note