Big Green Egg 117250 Temperature Gauge User Manual
- June 3, 2024
- Big Green Egg
Table of Contents
Big Green Egg 117250 Temperature Gauge
Instructions
- Press and hold the power button for 3 seconds to turn unit on or off.
- Press the backlight button to turn on/off the backlight.
- Press and hold the backlight button to switch between °C and °F.
- To charge the temperature gauge, gently rotate the top portion of the gauge 1/8 turn counter-clockwise and separate from the probe. Use included charging cable to recharge the unit using USB or a wall socket. The battery charging indicator will cycle from empty to full until the unit is fully charged.
- While the top portion of the unit is detached for charging, protect the probe from the elements by using the attached cover.
- Install Bluetooth Dome Thermometer from The Big Green Egg, Inc. in Apple App Store or Google Play Store. With the thermometer powered on, open app and click “Search Equipment.” The app can be used to set min and max temps, choose alarms, and set a timer.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and the receiver
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and operated with a minimum distance between 20cm of the radiator and your body. Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>