PMW L617 Wireless Controller For Switch Instruction Manual
- June 1, 2024
- PMW
Table of Contents
WIRELESS CONTROLLER FOR SWITCH/SWITCH OLED
Fray “Ty way
BUTTONS
CONNECTION
The First Connection: Long press pairing key for 2 seconds, led1-led4 running lights flash Second connection mode:
- Please sure the “Pro controller wired Communication” is turn on( System settings > Controllers and Sensors >Pro Controller wired communication >On )
- Wired connect ways like the picture
Android:
- Long press the”x+home”key for 2 second sin the off state which is the Android game pad mode,and the LED 4 in dicator will beon.
- After successful pairing.press the[home] key next time to connect automatically,
macoOs:
Apple MFI mode,long press”B+home”key for 2 seconds,LED3 indicator will be on.
CONTINUOUS FUNCTION
- Manual continuous firing: Press (the first time) A/ B/X/Y /L1/L2/R1/12/ cross key tturbo key to set continuous firing function.
- Clear the continuous sending: press turbo again (the second time) to realize the auto turbo function; Press and hold turbo key for 5 seconds to clear all consecutive functions.
- Press and hold turbo key + “A” key first to clear turbo function of current “A” key.
BATTERY
| STATE OF CHARGE | INDICATOR STATUS |
|---|---|
| Low power | Channel lights flash in the game |
| Charging | Led 4 Indicator Flashing |
| Charging complete | Led 4 Indicator is always on |
LIGHTING CONTROL
- T plus L3 (stick click down) order: red, orange, green, cyan, blue, purple, magic) light loop.
- T plus L3 (rocker double click down) Order: color breathing light cycle / phantom breathing light cycle / tum off light.
- T plus L3 (stick long press for 2 seconds) adjustable light brightness, light scheduling a total of levels, 25%, 50%, 75%, 100%
VIBRATION
- Enhance the vibration effect (T+Up arrow key)
- Reduce vibration effect (T+ Down arrow key)
AUTOMATIC SHUTDOWN
The host screen is closed and the handle automatically sleeps If no key is pressed within 5 minutes, it will sleep automatically.In Bluetooth mode, press the home key for 3 seconds to disconnect the host, and the handle will sleep.
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection againstharmful interference in a
residential installation. This equipment generates, uses and can radiateradio
frequency energy and, if not installed and used in accordance with the
instructions, maycause harmful interference to radio communications. However,
there is no guarantee thatinterference will not occur in a particular
installation. If this equipment does cause harmfulinterference to radio or
television reception, which can be determined by turning the equipmentoff and
on, the user is encouraged to try to correct the interference by one or more
of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>