LG StandbyME 27ART10AKPL Lifestyle Touch Screen User Manual

StandbyME 27ART10AKPL Lifestyle Touch Screen

“`html

Specifications:

• Model Number: M4L34, M4L10
• Weight: 10 kg (may vary by model)
• Power Requirement: 19 V 4.0 A

Product Usage Instructions:

Installation:

1. Insert the stand base into the styrofoam groove, then insert
   the bar into the hole of the stand base and secure with four
   screws.

2. Check the orientation of the power cable and cable holder, then
   secure the power plug to the back cover of the screen.

3. Secure the screen to the stand by inserting the stand hook into
   the back cover groove and tightening it while pushing the lower
   part.

4. Secure the ring cover of the stand by aligning the screen back
   cover and ring cover marks and ensuring a tight fit.

Disassembly:

1. Position the screen vertically and push the top of the screen
   lightly in the direction of the arrow to disassemble a part of the
   cover space.

2. Use a wedge or hand to completely disassemble the cover,
   keeping caution to avoid damage.

3. Lower the rear lever, push the bottom of the screen forward,
   lift and separate the top of the screen from the stand.

4. Press the plug lock, push it in the direction of the arrow to
   disassemble the screen completely.

FAQ:

Q: What is the weight capacity of the product?

A: The weight capacity is greater than 10 kg, but it may vary
depending on the model.

Q: What is the power requirement for this product?

A: The power requirement is 19 V 4.0 A.

“`

www.lg.com
Installation
User Install Guide

MFL718845022310rev02

M4L34 M4L10

4ea

1ea

AA Depending on model
1 A Insert the stand base into the styrofoam groove as shown in the figure. B Insert the bar into the hole of the stand base along the groove until it reaches the parting line. C Secure the four screws. B
A >10 kg
C

M4L34
4X

2

Check the orientation of the power cable and cable holder.

Power plug
Cable holder Power cable

3

Hold the screen and secure the power plug. A Check the position of the power plug on the back cover of the screen. B Secure it tightly to the back cover side.

4

Secure the screen to the stand. A Insert the stand hook into the back cover groove and tighten while pushing the lower part, as shown in the figure. (Push it until you hear a [click] sound.)
B Secure one screw to the cable holder.

A

A

B

5

Secure the ring cover of the stand. A Align the screen back cover and ring cover [mark] and install them. B Check if it sits tightly as shown in the figure.

A

B

B

1X

M4L10

Depending on model

MFL718019042404REV00

ART10*
Disassembly
1 Position the screen vertically.

2 Push the top of the screen lightly in the direction of the arrow to disassemble a part of the cover space.

www.lg.com/support
3 Use a wedge or pull it with your hand to completely disassemble the cover.

Caution Avoid pushing it hard. There is a risk of damage.

4 5 6 Position the screen horizontally and disassemble the cable holder screw.

Lower the rear lever and push the bottom of the screen forward, as shown in the figure.

Lift the screen, separate the top of the screen, and hold the screen.

Keep the disassembled screen close to the stand at a distance of 10 cm or less.

M4L10
1X

7 8 Press the plug lock, push it in the direction of the arrow, and then disassemble the screen completely.

Lay the stand on the box packaging, remove the four screws, and then disassemble the stand bar.

Plug lock

Do not lift the plug or pull it downward when disassembling the screen.

4X M4L34

QU
1BUIGJOEFS6OJUF QU “MJHOTUSPLFPVUTJEF

Kg

90°

A

B

C D E F FG

(mm)

(kg)

27ART10AKPL 621 1068 ~ 1268 397 361 29.9 17.5

4.8

Power requirement

19 V 4.0 A

References

• LG Electronics & Home Appliances | Shop Now | LG USA
• Customer Care: Product Support & Contact Info | LG Australia

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>