ARTi-LiFE B0CNDCZKC6 Handrails for Outdoor Steps User Manual
- June 1, 2024
- ARTi-LiFE
Table of Contents
ARTi-LiFE B0CNDCZKC6 Handrails for Outdoor Steps
Product Information
Specifications:
- Product Name: Arti-Life Handrails for Outdoor Steps
- Design: Well Designed & Sturdy
- Installation: Easy to Install
- Material: Metal End Cap
- Package Includes:
- 1X Handrail pipe
- 2X Column
- 1X The connecting pipe
- 2X Cover-up
- 2X Connector of the handrail pipe
- 2X Connector of the column
- 8X Expansion screw
- 8X Self-tapping screw (White)
- 4X Screws & Nuts (Black)
- 8X Screw of the connector
- 1X Drill
- 1X Installation aids
Product Usage Instructions
Step 1: Install cover-up
Put on cover-up A4 from the top of the column A2.
Notice: Please place the cover-up in the correct direction.
Step 2: Install connector
Install the A5 connector of handrail pipe with B4 screws. The left and right directions of the two connectors are the same.
Frequently Asked Questions
- Q: Are the end caps secure and integrated?
- A: Yes, the end caps are sealed by iron, integrated, and will not lose.
- Q: What type of floors can the handrails be installed on?
- A: The handrails can be installed on cement/brick floors using expansion screws or on wooden floors using self-tapping screws.
Arti Life Handrails for Outdoor Steps
Package list
- A1 1 X Handrail pipe
- A2 2 X Column
- A3 1 X The connecting pipe
- A4 2 X Cover up
- A5 2 X Connector of the handrail pipe
- A6 2 X Connector of the column
- B1 8 X Expansion screw
- B2 8 X Self tapping screw
- B3 4 X Screws Nuts
- B4 8 X Screw of the connector
- B5 1 X Drill
- B6 1 X Installation aids
Installation Instruction
Step 1：Install cover-up
Put on cover-up A4 from the top of the column A2. 
Notice: Please place the cover-up in the correct direction
Step 2：Install connector
- Install the A5 connector of handrail pipe with B4 screws, and the left and right directions of the two connectorsare the same.
- Install the A6 connector of column with B4 screws, and the up and down directions of the two connectors are opposite.
There are two ways to tighten B4 into the connector
- Tighten B4 by hand with Allen wrench
- Tighten B4 by electric drill.
Step 3：Make adjustments
- Insert the two sides of the A3 into the A6 respectively.
- Insert the A2(column) into the A5(connector of the handrail pipe).
- Put the whole parts on the steps to be installed, and make adjustments
About the Screws & Nuts
After adjusting the angle, align with pre drilled hole position, and install the B3 screw to secure it by using C1 and C2 tools. (The angle cannot be adjusted after tightening the B3 screw).
What we consider
Firstly, in order to avoid the bolts in the connector of the handrail pipe hurting your hands. Secondly, for aesthetic considerations, we provide not- too-long bolts , which are just enough when you tighten them.
We will optimize this installation method in the next version.
- Twist the nut with your hand first.
- After adjusting the angle, use the Phillips screwdriver (C2) and the double-ended wrench(C1) to tighten them.
Step 4：Drill holes and install the screws
Fix the A2(column) on the ground, and then you should according to the different conditions of the ground, select suitable accessories and punch holes.
- Cement/Brick Floors: Drill holes with the provided drill B5. Drill a hole of at least 35 inches deep (90 cm), and fix the column with expansion screws B1.
- Wooden floor: Fix column with self-tapping screws B2.
Notice: Tighten all parts of the connector to ensure stability, and put down
the coverup to protect the bottom of the column finally.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>