BASO K16RA Series Nickle Plated Thermocouples Instructions
- June 1, 2024
- BASO
Table of Contents
BASO K16RA Series Nickle Plated Thermocouples
Product Specifications
- Brand: HuskyTM
- Series: K16RA
- Coating: Nickle-Plated
- Applications: Thermoelectric applications with standing pilots
- Corrosion Resistance: Nickel plating for extended life
Product Usage Instructions
Description
The K16RA Series thermocouples are specifically designed for use in thermoelectric applications where standing pilots are required. The nickel plating provides corrosion resistance, making them suitable for environments that require durability.
Compatibility
These thermocouples can be used not only with HuskyTM products but also with other manufacturers’ standing pilots, offering versatility in application.
Installation
- Ensure the gas supply is turned off before installation.
- Remove the existing thermocouple carefully if replacing an old one.
- Connect the new K16RA Series thermocouple securely to the gas line and the pilot assembly.
- Check for leaks by applying a soapy water solution to the connections and observing for bubbles.
- Once installed, test the thermocouple by lighting the pilot and ensuring it stays lit.
Description
K16RA Series thermocouples are designed to be used in many thermoelectric applications where standing pilots are needed. The K16RA Series has nickel plating added for applications where corrosion resistance is needed to extend the life of the ther-mocouple. This style thermocouple can also be used with other manufacturers’ standing pilots.
Agency Listing
CSA (AGA/CGA) Certificate number 229521-1656071
Selection Chart
Part Number| Length| Replaces Johnson Controls| Open Circuit
mV Range
---|---|---|---
K16RA- 24H
| 24 in. (610 mm)| N/A| 25 – 35 mV
K16RA- 30H
| 30 in. (762 mm)| N/A| 25 – 35 mV
K16RA- 36H
| 36 in. (914 mm)| N/A| 25 – 35 mV
K16RA- 48H
| 48 in. (1219 mm)| N/A| 25 – 35 mV
K16RA- 60H
| 60 in. (1524 mm)| N/A| 25 – 35 mV
K16RA- 72H
| 72 in. (1829 mm)| N/A| 25 – 35 mV
means the bulk pack is available upon request.
Notes: Connects to valves with 11/32-32 male nut connector
- Open Circuit: 17 mV minimum
- Closed Circuit: 8 mV minimum
- Maximum Hot Junction Temperature: 1500°F (816°C)
FAQs
Q: Can these thermocouples be used in outdoor applications?
A: While the nickel plating provides some level of corrosion resistance, it is recommended to avoid direct exposure to harsh outdoor elements to ensure longevity.
Q: Can I trim the thermocouple to a shorter length if needed?
A: It is not advisable to trim the thermocouple as it may affect its performance and compatibility with the pilot assembly. It is recommended to choose the appropriate length from the available options.