ideal lux 8I231433 Dynamite Pendant Light Instruction Manual
- June 1, 2024
- ideal lux
Table of Contents
ideal lux 8I231433 Dynamite Pendant Light
Product Information
Specifications
- Model: Dynamite SP6
- Socket Type: GU10
- Max Wattage: 6 x 28W
- Voltage: 220-240V
- Frequency: 50/60Hz
Product Usage Instructions
Installation
- Installation of this product should be carried out by qualified personnel.
- Follow the assembly instructions in numerical order.
- The lighting fixture should be installed by a qualified electrician.
Alternative Assembly – Ceiling Fixing
- Follow the provided instructions for ceiling fixing.
- Ensure the installation is done by a qualified electrician.
Energy Efficiency
- This product is equipped with a light source with an energy efficiency class labelled as F.
Legend Icons
- Sorgente luminosa sostituibile dall’utente finale – Replaceable light source by an end-user.
- Sorgente LED luminosa sostituibile dall’utente finale – Replaceable LED light source by an end-user.
- Sorgente luminosa sostituibile esclusivamente da personal autorizzato – Replaceable light source by authorized personnel only.
- Dispositivo di alimentazione sostituibile dall’utente finale – Replaceable control gear by an end-user.
- Dispositivo di alimentazione sostituibile esclusivamente da personale autorizzato – Replaceable light source by authorized personnel only.
FAQ
- Q: Is it safe to replace the light source myself?
- A: Depending on the icon legend provided, the light source may be replaceable by the end user or require replacement by authorized personnel only. Please refer to the specific icon for guidance.
- Q: What should I do if the external power cable is damaged?
- A: If the external power cable is damaged, it should be replaced exclusively by the manufacturer, retailer, or a qualified electrician. Always disconnect the power supply before starting any installation or maintenance work.
THE SAFETY AND RELIABILITY ARE GUARANTEED ONLY WHEN INSTALLATION INSTRUCTIONS ARE PROPERLY FOLLOWED. PLEASE KEEP THIS INSTRUCTION SHEET FOR FUTURE REFERENCE.
- Suspension lamp Suspension
- GU10 max 6 x 28W / 220~240V 50/60Hz
- 8021696231433 BIANCO
- 8021696231396 NERO
- 8021696244648 OTTONE
Dimensions
Features
Installation Instructions
- This product is provided with a light source with efficient energy class of:
Energy Effificiency Class
- 8021696123943 F
ICONE
- Replaceable light source by an end-user.
- Replaceable LED light source by an end-user.
- Replaceable light source by authorized personnel only.
- Non-replaceable light source. Upon end of life of the light source, the whole product will be replaced.
- Replaceable control gear by an end-user.
- Replaceable light source by authorized personnel only.
- Upon end of the life of the control gear, the whole product will be replaced.
SAFETY INSTRUCTIONS
- This fitting is produced and tested by the strictest European safety standards (EN 60.598-1).
- This fitting cannot be disposed of as household waste. For disposal information ask the local authorities about how to collect it.
- As indicated by specific regulations, the lighting fitting should be installed by a qualified electrician.
- If the external wire is damaged it has to be replaced exclusively by the manufacturer, distributor or by a qualified electrician.
- Always isolate power before commencing installation, maintenance or repair.
- The luminaire contains certain parts which can be very hot.
- Each material requires specific mounting accessories. Use screws and wall plugs suitable for the material to which they are fastened. Those included may be unsuitable.
- Always tighten the screws firmly to avoid contact problems.
- This fitting should only be installed indoors.
- Luminaires are not suitable for recessed on normally flammable surfaces.
- Luminaire was not suitable for direct mounting on normal flammable surfaces.
- This fitting is only suitable for fixing the ceiling.
- This fitting is only suitable for fixing the wall.
- The weight of the lamp has to be supported by the chain. Adjust the length of the electric wire so that it is longer than the chain.
- Only use lamps that do not exceed the maximum specified wattage.
- Always observe the minimum distance between the lamp and the surface being lit, as shown in the icon. The lamp can cause a fire if the minimum distance is not observed
- Auto-protected bulb. Only use bulbs marked with this symbol. Halogen bulbs get very hot. Wait until they cool down before replacing them.
- Cracked or broken safety glass has to be replaced immediately. Use only manufacturer-approved parts complying with regulations.
- Light source with not-substitutable light emitting diode (LED). Do not disassemble the product since the diodes can damage the eyes. Do not immerse in water. Wipe with a damp cloth. Do not use solvents or strong detergents.
- This fitting is equipped with a fuse. If the lamp is out of order, replace the internal fuse.
- Class I Electrical safety is guaranteed by the main insulation and an additional protective conductor (earthing) connected to the metal frame of the lamp. Earthing is obligatory.
- Class I| Electrical safety guaranteed by the main insulation and double or reinforced insulation. Earthing is not necessary.
- Class Ill Electrical safety is guaranteed by a very low power supply (less than 50 Volts). Earthing excluded.
- Not protected.
- Protected against solid objects greater than 50 mm.
- Protected against solid objects greater than 12 mm.
- Protected against solid objects greater than 2,5 mm.
- Protected against solid objects greater than 1mm.
- Dust protected.
- Totally protected against dust infiltration.
- Not protected.
- Protected against vertically falling water drops.
- Protected against water drops falling with a maximum angle of 15° to the vertical axis.
- Protected against rain.
- Protected against splashing water.
- Protected against water jets.
- Protected against strong water jets.
- Protected against temporary immersion.
- Protected against prolonged immersion.
- Luminaire not suitable for covering with thermally insulating material.
- Caution, risk of electric shock.
- Do not stare at the operating light source.
References
Read User Manual Online (PDF format)
Loading......