ideal lux Yoko SP LED Pendant Light Instruction Manual

ideal lux Yoko SP LED Pendant Light

Product Information

• Model: Yoko SP
• Power: LED 16W
• Voltage: 220-240V, 50/60Hz
• Color Options: BIANCO (White), NERO (Black)
• Manufacturer: IDEAL LUX s.r.l.
• Website: www.ideal-lux.com

Specifications

• Light Source: LED
• Energy Efficiency Class: F
• Light Source Power: 9.4W
• Light Source Voltage: 12V DC

Product Usage Instructions

• Installation
  The lighting fitting should be installed by a qualified electrician.

• Light Source Replacement
  This product comes with a replaceable light source. Refer to the user manual for instructions on replacing the light source.

• Control Gear Replacement
  The control gear of the product can be replaced by an end-user following the provided guidelines.

Safety Instructions

1. Ensure the power supply is disconnected before installation or maintenance.
2. The product contains parts that can become hot during operation.
3. Use appropriate fixing accessories when installing the product.

FAQ

• Is the LED light source replaceable?
  The LED light source is replaceable by an end-user according to the provided instructions.

• Can the control gear be replaced by the user?
  Yes, the control gear of the product can be replaced by the end-user following the guidelines.

IDEAL LUX s.r.l.
www.ideal-lux.com

Yoko SP

• Suspension lamp
• LED 16W / 220~240V 50/60Hz
  • 8021696258898 BIANCO
  • 8021696258928 NERO

FOLLOW THE ASSEMBLY INSTRUCTIONS BY READING THE NUMERICAL PROGRESSION

QUALIFICATO. THE LIGHTING FITTING SHOULD BE INSTALLED BY A QUALIFIED ELECTRICIAN.

THE SAFETY AND RELIABILITY ARE GUARANTEED ONLY WHEN INSTALLATION INSTRUCTIONS ARE PROPERLY FOLLOWED. PLEASE KEEP THIS INSTRUCTION SHEET FOR FUTURE REFERENCE.

THE SAFETY AND RELIABILITY ARE GUARANTEED ONLY WHEN INSTALLATION INSTRUCTIONS ARE PROPERLY FOLLOWED. PLEASE KEEP THIS INSTRUCTION SHEET FOR FUTURE
REFERENCE.
This product is provided with a light source with efficiency energy class of :

EAN  Light Source Model Efficiency Class Light Source (W) Light Source (V)

LEGENDA ICONE

 SAFETY INSTRUCTIONS

1. This fitting is produced and tested in accordance with the strictest European safety standards (EN 60.598-1).
2.  This fitting cannot be disposed of as household waste. For disposal information ask the local authorities about how to collect it.
3. As indicated by specific regulations, the lighting fitting should be installed by a qualified electrician.
4. If the external wire is damaged it has to be replaced exclusively by the manufacturer, distributor or by a qualified electrician.
5. Always isolate power before commencing installation, maintenance or repair.
6. The luminaire contains certain parts which can be very hot.
7. Each material requires specific mounting accessories. Use screws and wall plugs suitable for the material to which they are fastened. Those included may be unsuitable.
8. Always tighten the screws firmly to avoid contact problems.
9. This fitting should only be installed indoors.
10. Luminaires not suitable for recessed on normally flammable surfaces.
11. Luminaire not suitable for direct mounting on normal flammable surfaces.
12. This fitting is only suitable for fixing to the ceiling.
13. This fitting is only suitable for fixing to the wall.
14. The weight of the lamp has to be supported by the chain. Adjust the length of the electric wire so that it is longer than the chain.
15. Only use lamps which do not exceed the maximum specified wattage.
16.  Always observe the minimum distance between the lamp and the surface being lit, as shown in the icon. The lamp can cause a fire if the minimum distance is not observed.
17. Auto-protected bulb. Only use bulbs marked with this symbol. Halogen bulbs get very hot. Wait until they cool down before replacing
18. Cracked or broken safety glass has to be replaced immediately. Use only manufacturer approved parts complying with regulation
19. Light source with not-substitutable light emitting diode (LED). Do not disassemble the product since the diodes can damage the eyes. Do not immerse in water. Wipe with a damp cloth. Do not use solvents or strong detergents. 20. This fitting is equipped with a fuse. If the lamp is out of order, replace the internal fuse.
20. Class I Electrical safety guaranteed by the main insulation and an additional protective conductor (earthing) connected with the metal frame of the lamp. Earthing is obligatory.
21. Class Il Electrical safety guaranteed by the main insulation and a double or reinforced insulation. Earthing not necessary
22. Class Ill Electrical safety guaranteed by very low power supply (less than 50 Volt).
23. Earthing excluded.
24. Not protected.
25. Protected against solid objects greater than 50 mm.
26. Protected against solid objects greater than 12 mm.
27. Protected against solid objects greater than 2,5 mm.
28. Protected against solid objects greater than 1mm.
29. Dust protected.
30. Totally protected against dust infiltration.
31. Not protected.
32. Protected against vertically falling water drops.
33. Protected against water drops falling with a maximum angle of 15° to the vertical axis.
34. Protected against rain.
35. Protected against splashing water.
36. Protected against water jets.
37. Protected against strong water jets
38. Protected against temporary immersion
39. Protected against prolonged immersion.
40. Luminaire not suitable for covering with thermally insulating material.
41. Caution, risk of electric shock.
42. Do not stare at the operating light source

References

• The domain name Electrician.LA is for sale

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>