EPYC 1500VA Active PFC Power Supplies User Manual

June 1, 2024
EPYC

EPYC 1500VA Active PFC Power Supplies

EPYC-1500VA-Active-PFC-Power-Supplies

Product Information

INTRODUCTION
Before using this uninterruptible power supply (UPS), please read this manual carefully to ensure optimal and safe use. The main features of this Line Interactive UPS are:

  • Microprocessor control for greater reliability
  • Pure sine wave output (compatible with active PFC loads)
  • Boost and buck AVR stabilization
  • DC start function (battery start)
  • Auto restart at the return of primary VAC power
  • USB communication port
  • Modem and telephone line protection (surge protection)
  • LCD display

Specifications

  • Porta di protezione/comunicazione: RJ45/11
  • Model: NYTRO 1500 VA 1500/900
  • Input Voltage: 230 VAC 50/60 Hz
  • Waveform: Pure sine wave
  • Dimensions: 148x178x298 mm
  • Weight: 10.8 kg

IMPORTANT SAFETY INSTRUCTIONS

For proper use of this continuity group (UPS), please read and follow these important safety instructions carefully. Pay close attention to this manual to disable, install, or use the UPS.

WARNING!  To avoid the risk of fire or electric shock, install the UPS in a controlled temperature environment, sheltered, and free from conductive dust and/or contaminants (see technical specifications).

Product Usage Instructions

Safety Instructions

  • Install the UPS in a controlled temperature environment, indoors, and free of conductive dust or contaminants.
  • Connect the UPS to an AC outlet with grounding and circuit protection.
  • Avoid exceeding a total leakage current of 3.5mA between the UPS and connected load.
  • In case of emergencies, press the OFF button and disconnect the power cable to turn off the UPS.
  • Disconnect the UPS during intense weather events to prevent damage to connected devices.
  • Batteries should not be disposed of in fire as they may explode.
  • Battery maintenance should be performed by qualified personnel.
  • Avoid using electrical power strips longer than 1.5 meters with the UPS.
  • Avoid inserting fingers into power outlets.

**Placement

**

Follow these instructions to correctly install and position the UPS:

Basic Functionality

Front Panel

  • Display LCD: Shows UPS status parameters such as input current, output current, load percentage, battery percentage, etc.

Rear Panel

  • USB Communication Port

Meaning of Icons on the LCD Display

Display Icon Indicator Meaning
Illuminated Display Mains Power
Battery Power Error/Alarm

Battery Level – Battery from mains – Charging Battery (Flashing
LED) – Charged Battery (Solid LED)| Input Voltage (Volts) – Load Level – Output Voltage
(Volts)

LED Signals and Alarms

UPS Status LED Status Alarm Status
Normal LED On No Alarm
Battery Power Flashing LED every 30 seconds 1 Beep every 30 seconds
Battery Low Solid LED On 1 Beep every 2 seconds
Overload Flashing LED every 2 seconds 1 Beep every 2 seconds
Battery Charging with UPS Off Flashing LED every 0.5 seconds 1 Beep every

0.5 seconds
Error| LED Off| Continuous Alarm

LCD Display Appearance
Indicator Meanings

LCD Display Lighting
Power from the network, Power from the battery, Error/Alarm

From battery – Battery level
From network – Charging battery (Flashing LED), Battery charged (LED on)

LED SIGNALS AND ALARMS

UPS Status LED Alarm

TECHNICAL SPECIFICATIONS

Model NYTRO 1500 VA
Power (VA/W) 1500/900

SOFTWARE MANAGEMENT DOWNLOAD

The management software provides an intuitive, user-friendly interface that allows you to view all essential system information at a glance.

Installation procedure:

  1. Download the Power Master software from the website www.justepyc.com.
  2. Double-click the downloaded file and follow the step-by-step installation procedure.
  3. To access the software, double-click the program icon, or open your web browser and type the address http://localhost:3052.

MAINTENANCE

Before starting any cleaning operation, make sure that:

  • The AC input current is disconnected from the UPS.
  • The UPS is turned off.

SUPPORT

If the UPS was damaged during transport, report it to the carrier. If the UPS requires diagnosis or repair, please refer to the “Troubleshooting” section. If the problem persists, contact support through the website www.justepyc.com.

Opening, inspection, or replacement of components inside the UPS should always be performed by specialized technical personnel within the warranty period.

WARRANTY

Epyc offers its own legal warranty of 24 months from the date of purchase (12 months in the case of sales by the Company to professional users with the issuance of an invoice outside).

The standard warranty of Epyc is to repair or replace the original unit with a reconditioned one. For specific warranty conditions such as battery and fuses, and the validity period of the warranty, please consider 12 months from the date of purchase.

For more detailed rights under the warranty, please visit the website www.justepyc.com.

ENVIRONMENTAL PROTECTION

All Epyc product goals are made from recyclable materials, in compliance with the company’s environmental policy.

For proper disposal, please separate the different types of packaging materials as shown in the following table:

Component Material Recycling Code

The UPS contains electronic boards and batteries, which are considered toxic and hazardous waste.

At the end of the UPS’s life, it must be disposed of according to current WEEE directives (Waste Electrical and Electronic Equipment). For more details, visit www.justepyc.com.

Proper disposal helps to respect and protect the environment.

Frequently Asked Questions (FAQ)

Q: How do I know when to replace the batteries in the UPS?
A: The UPS will indicate a low battery level either through a solid LED on the display or by emitting a beep every 2 seconds. Consult the user manual for battery replacement instructions.

Q: Can I connect multiple devices to the UPS?
A: The total load connected to the UPS should not exceed its specified capacity. Refer to the user manual for guidance on connecting multiple devices.

Q: Where can I download the UPS management software?
A: The software can be downloaded from www.justepyc.com.

Q: What should I do if my UPS does not power on?
A: Refer to the “Troubleshooting” section in this manual for potential causes and solutions. If the issue persists, contact support.

Q: How do I properly dispose of my UPS at the end of its life?
A: The UPS must be disposed of according to WEEE directives. Visit www.justepyc.com for further details.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals