Greenote GSC60 Cordless Vacuum Cleaner User Manual

Greenote GSC60 Cordless Vacuum Cleaner

Thank you!
Dear New Greenote Vacuum Cleaner GSC60 Owner, Thank you so much for purchasing the Greenote cordless vacuum cleaner GSC60. We would like to say using a Gracenote vacuum cleaner is a good choice for you. We hope this little guy will change your life! The Greenote team has prepared this kit to help you and your family to better enjoy GSC60.

USER MANAUL
All the details about parts, use maintenance, tips and more.

WARRANTY INFORMATION
It’s important to make sure you guarantee, please don’t throw it away.

FAST CUSTOMER SUPPORT
scan below QR Code below or send the following email to get the solution if you have any questions vc.support@greenotehome.com

Caution
Before using this product, please read all the contents of the manual carefully.

1. This vacuum cleaner is a dry vacuum cleaner, not for sucking water, detergent and other liquids and items with wet surfaces. Do not pour water or other liquids into the machine. It may cause a short circuit and damage the machine.
2. Do not use this vacuum cleaner to suck tiny particles such as flour, cement, plaster powder, wall powder or larger objects such as toys and paper balls, otherwise, it will cause motor burnout and blockage of the vacuum cleaner.
3. When cleaning the vacuum cleaner, please use a dry cloth to wipe it, do not use gasoline, banana water or other cleaning agents that can easily crack or fade the surface of the vacuum cleaner.
4. Please do not use or store the vacuum cleaner under unfavourable conditions such as high temperature, low temperature, etc. It is recommended to use it under the ambient temperature of 0~40°C, please store it in a cool and dry place, and forbid long-term sunlight exposure.
5. When using a new battery or using the battery for the first time after long-term storage, please fully charge the battery first. When storing this vacuum cleaner for a long time without using it, please ensure a full discharge and full charge every three months.
6. Do not use the vacuum cleaner or perform cleaning and maintenance while it is charged.
7. Only use the charger included in the package to charge this vacuum cleaner.
8. Please do not put the battery near hot objects or flames, and do not insert sharp objects into the battery.
9. Given the characteristics of lithium batteries, the maximum power of the battery may decay after about 2 years of use. But please do not worry, we provide all buyers with a three-year warranty service and parts replacement service, during the warranty period you can contact our after-sales mailbox to get all the damaged parts including the decaying battery replacement. Our after-sales email:

Packing List

Parts Introduction

1. Touchscreens
2. Interface
3. Filter
4. ust Cup
5. Dust Cup Release Button
6. Dust Cup Cover
7. Mode Button
8. Battery Pack
9. Charging Port
10. Battery Release Button
11. Handle
12. Power Switch
13. Air Outlet
14. Air Outlet Filter
15. Tumbler
16. Telescopic Tube
17. Interface
18. Wall Bracket

Multiple Applicable Modes
Installation: Connecting the accessories, when the “Ka” sound is heard, it means that the installation is complete.

Charging Modes

1. Connect the charger directly to the battery pack charging port to charge the main unit.
2. Mount the wall mount on the wall first, then hang the vacuum cleaner on the mount, then connect the adapter to the battery charging port for charging.
3. Remove the battery from the main unit, then connect the charger to the battery pack charging port for charging.

Charging Indicator
There are three charging indicators on the battery: 30% , 60% , and 100% , and by following these three markers, you can see the current charge level of the battery. We recommend fully charging the battery before each use to get the best cleaning experience.

Touchscreen

1. After powering on, the touchscreen displays the power level. (Standard/Medium/MAX)
2. Touch “ ” on the screen to adjust the suction power.
3. When the brushes become tangled, the icon ” ” is displayed on the touch screen to indicate that the brushes need to be cleaned.
4. When the dust cup is overflowing, the icon “ ” is displayed on the touch screen to indicate that you need to clean the cup.

Accessory Brush

• Bed Brush: For cleaning dog and cat hair and mites from the bed.
• Pet Hair Brush: For cleaning dog and cat hair stuck to pillows.
• Extension Hose: Extend the Extension Hose in any direction in complex areas to dramatically reduce the difficulty of cleaning.
• Flexible Crevice Tool: For cleaning behind cabinets, washing machine crevices and other complex areas.
• Long Straw: For cleaning narrow areas such as sofa crevices, windows, tables and chairs.
• 2-in-1 Brush: For cleaning carpets, beds, curtains, ceilings, etc.
• Lint Roller Brush: For cleaning dust, debris, hair, etc. from floors or tiles.

How to Use the Host

Preparation
Before use, please make sure the main machine is fully charged. Before using it for the first time, charge it for 5 hours to ensure the normal operation of the machine, and then select the brush head with different functions according to the area to be cleaned.

Operation
The vacuum cleaner has three suction power modes: maximum/medium / standard.
Press the “+/-” button to adjust the suction power.

Daily Maintenance

Mainframe cleaning

1. First, turn off the power switch and press the dust cup release button to empty the waste. Turn the dust cup clockwise to separate it from the main unit.
2. Remove the filter screen from the top of the dust cup.
3. Separate the filter screen from the cartridge.
4. Clean the filter screen and cartridge.
5. Dry the roller brush for 24 hours.
6. Wait until completely dry before using.

Air outlet filter cleaning

1. Turn off the power switch and turn counterclockwise to remove the filter cartridge from the air outlet.
2. Clean the filter cartridge.
3. Wait until completely dry before installing and using it.

Note
Regular cleaning of the cartridge will maintain good suction power.

Rolling Brush Cleaning

1. Press the press mark “ ” on the floor brush to unlock the roller brush.
2. Remove the roller brush, and use the hair tool included in the package to clean up the tangled hairs.
3. Wash with water.
4. Wait until completely dry before installing and using it. To install the brush, simply insert the brush into the floor brush to secure the brush.

 Product Parameters

Greenote Team
Email: vc.support@greenotehome.com
Facebook: Greenote Home
Website: www.greenotehome.com
Insgram: greenote.global
Youtube: Greenote Home
Shenzhen Apeman Innovations Technology Co., Ltd.
1801, Heng Lu E Times Building, No. 159, North PingjiRoad,
Hehua Community, Pinghu Street, Longgang District, Shenzhen,
Canadiana China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>