Shenzhen Yijuge Home Furnishing Co Ltd ILGEGE-AG01 Monn Bunny User Manual

Shenzhen Yijuge Home Furnishing Co Ltd ILGEGE-AG01 Monn Bunny

Product Specifications:

• Material: ASB/PC/PVC
• Product Color: White
• Laser Wavelength: 532nm
• LED Power: [Not specified]

Product Usage Instructions

Power On/Off and Default Settings:

To turn on the device, short press the ON/OFF button. The default settings include nebula, stars, and moon projection being activated. To turn off the moon projection, press the moon button. Long press the moon button again to turn it back on.

Adjusting Projection Direction:

The projection direction can be adjusted by rotating the lunar rabbit head.

Bluetooth Connection and Music Playback:

Switch to Bluetooth mode by pressing the Bluetooth button. Use the remote control to play/pause music, adjust volume (add/reduce sound), skip tracks (previous/next piece), and control music playback.

Nebula and Star Patterns:

Toggle between Nebula and Star patterns by pressing the corresponding buttons. Adjust Nebula brightness and speed using the remote control. For stars, adjust brightness with Star+ and Star-, and activate/deactivate stars with a series of button presses.

Timing Mode:

Set timing mode by pressing the timer button. Each press cycles through different timing options (45 seconds blue light, 90 seconds red light). Press again to cancel the timer.

Frequently Asked Questions (FAQ):

• Q: How do I adjust the brightness and speed of the nebula projection?
  A: Use the Nebula brightness+/- buttons to adjust brightness levels. Press Nebula speed+/- to control the speed of the nebula projection.

• Q: Can I connect my phone via Bluetooth to play music?
  A: Yes, you can connect your phone to the device via Bluetooth by pressing the Bluetooth button and following the pairing instructions.

• Q: How do I turn off specific projections like stars or nebula?
  A: Use the corresponding buttons on the remote control to toggle individual projections on or off.

Operating instructions

The light source of stars and nebulae is strong, so eyes should not look directly at the light source.
The head and body of the astronaut are connected by magnets, and the direction of the head can be adjusted. Do not stretch the astronaut’s head and body forcefully, otherwise, the wires may break due to stretching.

• NO/OFF: short press to turn on and off, nebula, stars and Moon turn on by default after booting; Long press the Moon to close, long press the Moon to turn on, and after booting the button Nebula, Stars and Moon to turn off.
• Power jack: 1.2-meter long USB data cable. When using the power cable, you need to check the data cable. The charging head is a DC interface and a 5V2A data cable.
• How to fit the ears: After unpacking, check the earrings, analyze the left and right, select the right vacancy, align the position, insert it directly, and then insert it into the other ear.

Remote Control Instructions

• ON/OFF: Short press to turn on the phone. Nebula, Star and Bluetooth modes will be turned on by default after turning on the phone. After turning on the phone, press the button again to turn it off.
• Bluetooth: Press to switch Bluetooth mode to connect to Bluetooth
• Play/Pause: Play or pause music
• Add sound: Increase sound with each click
• Reduce sound: Reduce sound with each click
• Previous piece: Each click switches to the previous song
• Next track: Each click switches to the next song
• Next pattern: Each time the button is pressed, the nebula switches to a colour, and after a cycle, it returns to the default colour. Press and hold the button to turn Nebula. After closing Nebula, press the button briefly to turn it back on.
• Nebula brightness+: The default brightness is mid-range, and each time you press it, the brightness increases by one level.
• Nebula brightness-: The default brightness is mid-range, each time you press it, the brightness decreases by one level
• Nebula speed: The default speed is mid-range. Press once to pause the Nebula speed, and press again to return to normal speed.
• Nebula speed+: Each time you press it, the nebula’s speed will increase by one level until it reaches the fastest speed.
• Nebula speed-: Each time you press it, the nebula’s speed will decrease by one level until it stops.
• Star pattern: By default, the stars are in the normal breathing state. Press once again to turn the stars on. Press again to turn off the stars. Press again to turn the stars back on.
• Star+: Each time you press Star+, the brightness of the star will increase by one level
• Star-: Each time you press Star-, the brightness of the star will decrease by one level
• Timing mode: Press the timer for 45 seconds to display the blue light, press the timer again for 90 seconds to display the red light, and press it again to cancel the timer;

SPECIFICATION

• Material: ASB/PC/PVC
• Product Color: White
• Laser Wavelenght:532nm
• Led Power:<5W
• CLASS I LASER PRODUCT
• Diode Laser-Max.Output<1mW
• Control Mode: Remote control
• Remote Control Range:<5meters(Best distance)
• Power Supply:100-240V~50/60Hz 0.4A
• Work Input:5V=2A
• Working Temperature:-10°~45°Celsius

CLASS I LASER PRODUCT
Diode Laser-Max.Output<1mW
This is not a toy, children should not use it alone, please use it with an adult!

FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmful interference e to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>