AKKON WJ10-0713 2016-2023 Toyota Tacoma Headlights User Manual
- June 1, 2024
- AKKON
Table of Contents
AKKON WJ10-0713 2016-2023 Toyota Tacoma Headlights
Specifications
- Model: WJ10-0713
- Compatibility: 2016-2023 Toyota Tacoma with factory halogen type headlights model, 2016-2023 Toyota Tacoma with factory DRL headlights model (For factory LED headlight model, wiring adapters required)
Product Usage Instructions
Installation Instructions for Model with Factory Headlights without DRL
- Disconnect all the plugs of the original headlights.
- Use the side marker from the original light and insert it into the new headlight.
- Connect the plug with DRL on one side and onto the original ACC on the other side.
- Pull out the black socket of Wiring 2 and install it on the signal wire of the new headlight.
Installation Instructions for Model with Factory Headlights with DRL
-
Disconnect all the plugs of the original headlights.
-
Use the side marker from the original light and insert it into
the new headlight. -
Connect Wiring 2 to the turn signal wire of the new
headlight.
Installation Instructions for Model with Factory LED Headlights
- For LED type, use the provided wiring adapters (not included).
- Connect all the plugs.
- Repeat steps 2-18 for the other side.
- Reinstall the original removed parts and bolts. Use a 10mm wrench socket.
- Adjustment steps are the same for the other side.
MORE INFORMATION
REQUIRED TOOLS
Installation Instructions
Model with factory headlights w/o DRL
Model with factory LED headlights
Adjustment steps
FAQ
- Q: Do I need additional tools for installation?
- A: Yes, you will need a socket, ratchet, panel remover, bolts, and clips as per the installation instructions.
- Q: Can I install these headlights on a different vehicle model?
- A: No, these headlights are specifically designed for use on 2016-2023 Toyota Tacoma models as mentioned in the specifications.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>