NANLUX 2400B Evoke LED Bi Color Spot Light User Manual
- June 1, 2024
- NANLUX
Table of Contents
NANLUX 2400B Evoke LED Bi Color Spot Light
Specifications
- Brand: NanGuang
- Model: Evoke 2400B LED Bi-color Spot Light
- Quick Release Device: Yes
- Adjustable Handle: Yes
- NL Mount: Yes
- Display Screen: Yes
- USB Port: Yes
- DMX IN/OUT: Yes
- Power Supply: AC Power Input Socket and DC Power Output Socket
- LED Indicator: Yes
Product Usage Instructions
1. Connection Between Light Fixture and Power Supply
Connect the AC power input socket of the fixture to a power outlet using the provided power cord. Ensure a stable power supply before turning on the fixture.
2. Installation and Detachment of Yoke
Installation:
- Lay down the light fixture on a flat surface with its bottom up.
- Press the quick release lever lock catch to release the lever and push it aside.
- Align and insert the quick release plates to the mounts on both sides of the fixture. Adjust the plate direction if needed.
- Firmly hold the yoke in place with one hand and pull the quick release lever with the other hand to lock the plate.
- Mount the fixture on a heavy-duty light stand and secure it with fastening screws.
Detachment:
- To disassemble the yoke, remove the fixture from the light stand and lay it down on a flat surface.
- Press the quick release lever lock catch on both sides of the fixture and release the lever to remove the fixture.
3. Installation of Yoke (Method Two)
Installation:
- Mount the yoke on a heavy-duty light stand and secure it with fastening screws.
- Press the quick release lever lock catch and push the lever aside.
- Align and insert the quick-release plate mounts to the plates of the yoke. Adjust the plate direction as needed.
FAQs
- Q: Can I disassemble the fixture for repairs?
- A: It is not recommended to disassemble the fixture for repairs as it may damage precision electronic components. If repair is needed, please return it to a qualified technician.
- Q: How should I prevent overheating of the fixture?
- A: Ensure that the vents of the fixture are not blocked during operation to allow proper heat dissipation and prevent overheating.
“`
Evoke 2400B LED Bi-color Spot Light
USER MANUAL
Guangdong NanGuang Photo&Video Systems Co., Ltd.
Introduction
Thank you for purchasing Nanlux product — Eovke 2400B! Evoke 2400B is a LED
bi-color spotlight specifically designed for film and TV projects. It is
equipped with rated power of 2400W, adjustable CCT of 2700K-6500K, precise
dimming in 0.1% increment, 12 effects, 4 fan CCTs, and 2 output CCTs. The
multiple control methods include on-board, remote control, Nanlink App,
DMX/RDM, LumenRadio CRMX and Ethernet (Art Net, sACN). Both the fixture and
power supply are built with metal structure and quick release mechanism, and
IP55 rating, providing precise, convenient and reliable lighting solutions for
production. It’s worth mentioning that Evoke 2400B also has modifier
recognition function, for automatically recognizing modifiers that with
electronic contacts and limiting the power, ensuring safety while making it a
more intelligent lighting equipment.
Notice
1. Please do not look directly at the emitter when the light is on, to avoid
eyes discomfort caused by high luminance. 2. Please do not place the fixture
near any flammables and explosives, to avoid fire hazard caused by high
luminance. 3. Please do not immerse the fixture in water. While with IP55
rating, the light fixture can be used in the rainy situations. 4. Please
ensure the fixture is dry before packing after using in the rain. 5. Please
place the power cable and DC cable properly to avoid stumbled caused by long
cables. 6. Please exchange the power cable if any damage is found, to avoid
electric shock. 7. Please use the power cable and DC cable provided by the
manufacturer as the power is high. Dangers like melting cable, electric shock
or fire may happen if cables
of other brands are used. 8. Please do not block the vents when the fixture is
on. The fixture is built with active cooling system, so ensure unimpeded vents
to prevent the fixture from protection
state due to overheating. 9. Please do not disassemble the fixture to repair
at will, to avoid damage to the fixture that contains precision electronic
components. If repair is required, please return
to the distributor or have it repaired by any qualified technician. 10. Please
switch the fixture off and unplug the cables before cleaning, to avoid
electric shock. 11. Please do not use strong detergent for cleaning. Please
wipe off the dirt by using a cloth with neutral cleanser when cleaning the
fixture. 12. Please hold the handle securely when detaching the accessories or
adjusting the beam directions, since the accessories such as Fresnel lens and
softbox are heavy. 13. Please ensure that the power cable and DC cable are
properly connected before powering the fixture, to avoid sparking and heating
of the plug.
01 WWW.NANLUX.COM
Evoke 2400B LED Bi-color Spot Light
Product Diagram
Technical Data
Rated Power: 2400W Input: DC48V/26A×2
AC100V-240V 50/60Hz 26A Max Color Temperature: 2700K – 6500K (GM±80) CRI:
Average 96 TLCI: Average 97
Product Details
1. Quick Release Device 2. Adjustable Handle
3. NL Mount 4. Lock Catch 5. Eye Bolt 6. Yoke
03 WWW.NANLUX.COM
8. Display Screen 9. Buttons
10. Left Knob 11. Middle Knob
12. USB Port 13. LAN1 14. LAN2
7. Handle
15. Right Knob
16. Wire Control Socket 17.DMX IN 18.DMX OUT 19.DC IN
04 WWW.NANLUX.COM
21. Hanging Hole
22. AC Power Input Socket 23. Power Switch
24. DC Power Output Socket
20. Power Supply Handle
25. LED Indicator
26. Quick Release Plate
27. Reflector 28. COB Protective Cap
Detailed Description
1. Quick release device: For quick installation and detachment of yoke. 2.
Adjustable handle: Tighten or release the tilt movement of the fixture on the
yoke. 3. NL mount: For installing the reflector or other NL mount accessories.
4. Lock catch: To lock or release the reflector or other accessories.
Note: Please pull in the direction indicated on it. 5. Eye bolt: For hanging
safety wire. 6. Yoke: Mount the fixture on a stand, also for pan and tilt. 7.
Fixture body handle: Offer convenient grip for adjusting direction of
illumination. 8. Display: To display data. 9. Buttons: Including CCT, EFFECT,
MENU and LOCK. 10. Left knob: For adjusting brightness. 11. Middle Knob: For
adjusting parameters for each option. 12. USB port: For updating firmwares or
providing current with maximum 5V/1A to external devices via connecting the
USB cable. 13. LAN 1: Network connecting port. 14. LAN 2: Network connecting
port. 15. Right knob: For selecting options. 16. Wire control socket: Wire
control interface. 17. DMX IN: DMX signal input interface. 18. DMX OUT: DMX
signal output interface. 19. DC IN: DC power input interface. 20. Power supply
handle: For lifting the power supply. 21. Hanging hole: For hanging the power
supply. 22. DC power output socket: For connecting the fixture to the power
supply with DC cable. 23. Power switch: To turn on/off the fixture. 24. AC
power input socket: For connecting AC cable and supplying power to power
supply. 25. LED indicator: For judging the power input state. Being on, means
power supply normal; Flashing or being off, mean power supply abnormal or no
power input. 26. Quick release plate: For mounting the quick release clamp.
27. Reflector: For concentrating light to improve the central illumination.
28. COB protective cap: For protecting the COB when the fixture is not in use.
(Note: Take off the cap before using.)
06 WWW.NANLUX.COM
Includes (for CN, UK, AU, EU, KR)
Evoke 2400B KIT-FO Flight Case Standard Kit (fixture only) :
Evoke 2400B×1
Yoke×1
Reflector×1 (packed separately)
DC Connection Cable×1
Power Supply×1
USB Flash Drive×1
Evoke 2400B
AC Power Cable×1
CC-EV2400-FT-FO Flight Case×1
AS-CP-QR-EV Quick Release Clamp×1
WS-RC-C2 Remote Controller×1
User Manual×1
Evoke 2400B LED Bi-color Spot Light USER MANUAL
Guangdong NanGuang Photo&Video Systems Co., Ltd.
07 WWW.NANLUX.COM
Includes (for US, JP)
Evoke 2400B KIT-FO Flight Case Standard Kit (fixture only) :
Evoke 2400B×1
Yoke×1
Power Supply×1
Reflector×1 (packed separately)
DC Connection Cable×1
Evoke 2400B
AC Cable with Edison Connector×1
USB Flash Drive×1
AC Cable (with bare ends)×1
CC-EV2400-FT-FO Flight Case×1
AS-CP-QR-EV Quick Release Clamp×1
WS-RC-C2 Remote Controller×1
AC/L (brown) AC/N (blue) PE (yellow & green)
User Manual×1
Evoke 2400B LED Bi-color Spot Light
USER MANUAL
Guangdong NanGuang Photo&Video Systems Co., Ltd.
08 WWW.NANLUX.COM
Usage
1. Connection Between Light Fixture and Power Supply
09 WWW.NANLUX.COM
2. Installation and Detachment of Yoke
Lay down the light fixture on flat ground, with its bottom up.
Press the quick releaselever lockcatch to release
the lever, and push the lever aside.
Align and insert the quick release plates to the mounts on both sides of the fixture.
Note: Please adjust the plate to right directions when installing the quick release plate, then insert them into the mount.
Firmly hold the yoke in place with one hand, and pull the quick release lever
with the other hand to lock the plate.
10 WWW.NANLUX.COM
Mount the fixture on heavy-duty light stand and lock the fastening screws on the light stand.
When disassembling the yoke, remove the fixture from the heavy-duty light stand first and lay it down on flat ground.
Press the quick release lever lock catch of the fixture on both sides, then release the quick release lever to remove the fixture.
11 WWW.NANLUX.COM
Installation of Yoke (Method Two)
Mount the yoke on heavy-duty light stand and lock the fastening screws on the light stand.
Press the quick release lever lock catch and push the lever aside, align and
insert the quick-release plate mounts to the plates of the yoke. (Note: Please
adjust the plate to right directions
when installing the quick release plate, then insert them into the mount.)
Pull the levers on both sides of the fixture to lock the quick release plate in place. The installation of the yoke is completed.
12 WWW.NANLUX.COM
3. Installation and Detachment of Reflector
When installing the reflector, align the reflector to the NL mount on the
fixture, rotate clockwise the reflector to fasten it on the fixture. Note: 1.
If the rotation is not smooth, pull the lock catch of the mount and rotate the
reflector at the same time.
2. The electronic contacts on the accessories should be aligned with those on
the fixture.
When removing the reflector, pull the lock catch of the mount, rotate anticlockwise the reflector and remove it.
13 WWW.NANLUX.COM
4. AS-CP-QR-EV Evoke Quick Release Clamp Installation
Rotate the adjustable handle to release the clamp.
Mount the quick release clamp on the light stand, then rotate the adjustable handle to tighten the clamp.
Align the quick release plate on the power supply with the quick release mount on the clamp, a click sound will be heard when the power supply is fastened in place.
Press the lock catch on the clamp to remove the power supply from the light
stand.
14 WWW.NANLUX.COM
Remote Control
·Evoke 2400B supports remote control via DMX/RDM, 2.4G, LumenRadio, Art-Net &
sACN, and has built-in Bluetooth module as well. The ADDRESS needs to be set
before operating the remote control via DMX/RDM, 2.4G, LumenRadio, Art-Net &
sACN.
1. ADDRESS/DMX, including ADDRESS, DMX CCT, DMX REDUCED CHANNELS, DMX DIMMING
CURVE and DMX SMOOTHING settings. 1.1 ADDRESS
Press the MENU button to enter the interface.
MENU
SMART
OUTPYT MDER
MODIFIER RECOGNITION
ADDRESS/DMX
WIRELESS CONTROL
NETWORK SETTINGS
Art-Net & sACN SETTINGS
CH: 512
left knob
middle knob
right knob
CCT EFFECT MENU LOCK
MENU
SMART
OUTPYT MDER
MODIFIER RECOGNITION
ADDRESS/DMX
WIRELESS CONTROL
NETWORK SETTINGS
Art-Net & sACN SETTINGS
CH: 512
Rotate the right knob to ADDRESS/DMX, and press the right knob to enter the secondary menu.
MENU
SMART
ADDRESS
DMX MODE
DMX REDUCED CHANNELS
DMX DIMMING CURVE
DMX SMOOTHING
PRESS “MENU” TO RETURN
CH: 512
15 WWW.NANLUX.COM
MENU
SMART
ADDRESS
DMX MODE
DMX REDUCED CHANNELS
DMX DIMMING CURVE
DMX SMOOTHING
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to ADDRESS, and press the right knob to enter the tertiary menu.
MENU
SMART
ADDRESS 512
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to select address number and press the right knob to set.
1.2 DMX MODE
MENU
SMART
ADDRESS
DMX MODE
DMX REDUCED CHANNELS
DMX DIMMING CURVE
DMX SMOOTHING
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to DMX MODE and press the right knob to enter the tertiary menu.
MENU
SMART
ADDRESS 512
PRESS “MENU” TO RETURN
CH: 512
MENU
SMART
SET
PRESS “MENU” TO RETURN
CH: 512
MENU CCT 8bit CCT 16bit ULTIMATE DMX 8bit
SMART
PRESS “MENU” TO RETURN
CH: 512
16 WWW.NANLUX.COM
MENU CCT 8bit CCT 16bit ULTIMATE DMX 8bit
SMART
MENU
SMART
SET
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to select CCT 8bit, CCT 16bit or ULTIMATE DMX 8bit, and press the right knob to set.
1.3 DMX REDUCED CHANNELS
MENU
SMART
ADDRESS
DMX MODE
DMX REDUCED CHANNELS
DMX DIMMING CURVE
DMX SMOOTHING
PRESS “MENU” TO RETURN
MENU OFF ON
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to DMX REDUCED CHANNELS, and press the right knob to enter the tertiary menu.
MENU OFF ON
SMART
PRESS “MENU” TO RETURN
MENU
SET
CH: 512
SMART
CH: 512
SMART
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to select ON or OFF and press the right knob to set.
PRESS “MENU” TO RETURN
CH: 512
17 WWW.NANLUX.COM
1.4 DMX DIMMING CURVE
MENU
SMART
ADDRESS
DMX MODE
DMX REDUCED CHANNELS
DMX DIMMING CURVE
DMX SMOOTHING
MENU
LINEAR EXPONENT LOGARITHM S CURVE GAMMA 2.2
SMART
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to DMX DIMMING CURVE, and press the right knob to enter the tertiary menu.
MENU
LINEAR EXPONENT LOGARITHM S CURVE GAMMA 2.2
SMART
PRESS “MENU” TO RETURN
MENU
CH: 512
SMART
SET
PRESS “MENU” TO RETURN
CH: 512
PRESS “MENU” TO RETURN
Rotate the right knob to select LINEAR, EXPONENT, LOGARITHM, S CURVE or GAMMA 2.2, and press the right knob to set.
1.5 DMX SMOOTHING
MENU
SMART
ADDRESS
DMX MODE
DMX REDUCED CHANNELS
DMX DIMMING CURVE
DMX SMOOTHING
MENU OFF ON
CH: 512
SMART
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to DMX SMOOTHING and press the right knob to enter the tertiary menu.
PRESS “MENU” TO RETURN
CH: 512
18 WWW.NANLUX.COM
MENU OFF ON
SMART
MENU
SMART
SET
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to select ON or OFF and press the right knob to set.
2. DMX Control 2.1. Connect the light fixture and the DMX512 console using
the connection cable, as below.
DMX IN
PRESS “MENU” TO RETURN
DMX OUT
CH: 512
GND 1 DATA- 2 DATA+ 3
NC
NC
NC
NC
1 GND 2 DATA3 DATA+
·5-pin shielded cable with a diameter not less than 0.3mm must be used for
connection between light fixture and DMX/RDM console, or between light fixture
and light fixture. XLR plug/socket and the cable should be connected as
picture above.
·Pin1, Pin2, Pin3 for connecting DMX signal. Pin4, Pin5 has no connection.
NOTE: When connecting DMX, make sure the internal pin is not in contact with
the inner case. The fixture can match the DMX512 (1990) control signal. ·5-pin
and 3-pin XLR plug/socket conversion
The fixture comes with 5-pin XLR plug/socket. lf a 3-pin XLR plug is used,
please follow the instruction below.
Five Pin
Pin 1:GND(SCREEN) Pin 2:Signal(-) Pin 3:Signal(+) Pin 4:N/C Pin 5:N/C
Three Pin
Pin 1:GND(SCREEN) Pin 2:Signal(-) Pin 3:Signal(+)
19 WWW.NANLUX.COM
2.2. DMX Terminator ln DMX control mode, the DMX output of the last fixture should be connected with a DMX terminator (Not included). This prevents interference caused by DMX signals in the transmitting process. The terminator is connected with a 120(OHM) resistor across Pin 2 and Pin 3. (As shown below)
5 4
3
1 2 120
DMX Terminator Connection Connect a 120(OHM) resistor
across Pin 2 and Pin 3 in an XLR plug and insert into the DMX OUT socket on
the last unit.
PIN 2 PIN 3
2.3. ADDRESS Setting. 2.4. Refer to the DMX reference guide from
www.nanlux.com and control the light via DMX/RDM console.
(For specific operation methods, please refer to the DMX/RDM console operation
manual.) 2.5. Note: For technical data, please download from
https://www.nanlux.com/en/h-col-274.html.
3. RDM Control 3.1. Connect the light fixture to the console with RDM
function, the connecting method is the same as that of DMX console. 3.2.
ontrol the fixture via a console with RDM function. (For specific operation
instruction, please refer to the RDM console operation manual.) Note: The UID
format of the fixture is as follows:
0008
XXXX
XXXX
Serial number 0503Evoke 2400B Manufacturer: Nanguang
20 WWW.NANLUX.COM
4. WIRELESS CONTROL 4.1 BLUETOOTH Setting
The Evoke 2400B has built-in Bluetooth module, so it can be controlled via
Bluetooth connection.
MENU
SMART
OUTPUT MDER
MODIFIER RECOGNITION
ADDRESS/DMX
WIRELESS CONTROL
NETWORK SETTINGS
Art-Net & sACN SETTINGS
CH: 512
Rotate the right knob to WIRELESS CONTROL, and press the right knob to enter the secondary menu.
MENU
BLUETOOTH SETTINGS 2.4G SETTINGS LUMENRADIO SETTINGS ALL WIRELESS ON/OFF
SMART
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to BLUETOOTH SETTINGS, and press the right knob to enter the tertiary menu.
MENU BLUETOOTH ON/OFF RESET BLUETOOTH
SMART
MENU
BLUETOOTH SETTINGS 2.4G SETTINGS LUMENRADIO SETTINGS ALL WIRELESS ON/OFF
SMART
PRESS “MENU” TO RETURN
CH: 512
MENU BLUETOOTH ON/OFF RESET BLUETOOTH
SMART
PRESS “MENU” TO RETURN
MENU OFF ON
CH: 512
SMART
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to BLUETOOTH ON/OFF, and press the right knob to enter the next level menu.
PRESS “MENU” TO RETURN
CH: 512
21 WWW.NANLUX.COM
MENU OFF ON
SMART
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to select ON or OFF, and press the right knob to set. The RESET BLUETOOTH is available when the Bluetooth is on.
MENU BLUETOOTH ON/OFF RESET BLUETOOTH
SMART
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to RESET BLUETOOTH, and press the right knob to enter the next level menu.
MENU
SMART
RESET BLUETOOTH BACK RESET
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to select RESET, and press the right knob to set.
MENU
SMART
SET
PRESS “MENU” TO RETURN
CH: 512
MENU
SMART
RESET BLUETOOTH BACK RESET
PRESS “MENU” TO RETURN
CH: 512
MENU
SMART
SET
PRESS “MENU” TO RETURN
CH: 512
22 WWW.NANLUX.COM
4.2 2.4G Setting ·Evoke 2400B can be remotely controlled by 2.4G remote
controller or by NANLINK APP via WS-TB-1 transmitter box.
Note:2.4G remote controller and NANLINK transmitter box are sold separately.
The fixture supports 2.4G wireless protocol V1.0 and V2.0. The fixture should
be set in V2.0 while using WS-RC-C2 remote controller, set in V1.0 while using
other remote controllers.
MENU
BLUETOOTH SETTINGS 2.4G SETTINGS LUMENRADIO SETTINGS ALL WIRELESS ON/OFF
SMART
MENU 2.4G ON/OFF WIRELESS PROTOCOL
SMART
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to 2.4G SETTINGS, and press the right knob to enter the tertiary menu.
MENU 2.4G ON/OFF WIRELESS PROTOCOL
SMART
PRESS “MENU” TO RETURN
MENU OFF ON
CH: 512
SMART
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to 2.4G ON/OFF, and press the right knob to enter the next level menu.
PRESS “MENU” TO RETURN
CH: 512
23 WWW.NANLUX.COM
MENU OFF ON
SMART
MENU
SMART
SET
PRESS “MENU” TO RETURN
CH: 512
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to select ON or OFF, and press the right knob to set. The 2.4G wireless control is available when the 2.4G is set to be on.
MENU 2.4G ON/OFF WIRELESS PROTOCOL
SMART
MENU
SMART
2.4G WIRELESS PROTOCOL V1.0 V2.0
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to WIRELESS PROTOCOL, and press the right knob to enter the next level menu.
MENU
SMART
2.4G WIRELESS PROTOCOL V1.0 V2.0
PRESS “MENU” TO RETURN
MENU
CH: 512
SMART
SET
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to select V1.0 or V2.0, and press the right knob to set.
PRESS “MENU” TO RETURN
CH: 512
24 WWW.NANLUX.COM
4.3 LUMENRADIO Setting Evoke 2400B has built-in CRMX TIMOTWO module, enabling it to receive and send CRMX wireless DMX signals. The specific operations are as below: press MENU to enter the interface.
MENU
SMART
OUTPUT MODE
MODIFIER RECOGNITION
ADDRESS/DMX
WIRELESS CONTROL
NETWORK SETTINGS
Art-Net & sACN SETTINGS
CH: 512
left knob
middle knob
right knob
CCT EFFECT MENU LOCK
MENU
SMART
OUTPUT MODE
MODIFIER RECOGNITION
ADDRESS/DMX
WIRELESS CONTROL
NETWORK SETTINGS
Art-Net & sACN SETTINGS
CH: 512
Rotate the right knob to WIRELESS CONTROL, and press the right knob to enter the secondary menu.
MENU
BLUETOOTH SETTINGS 2.4G SETTINGS LUMENRADIO SETTINGS ALL WIRELESS ON/OFF
SMART
PRESS “MENU” TO RETURN
CH: 512
25 WWW.NANLUX.COM
MENU
BLUETOOTH SETTINGS 2.4G SETTINGS LUMENRADIO SETTINGS ALL WIRELESS ON/OFF
SMART
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to LUMENRADIO SETTINGS, and press the right knob to enter the tertiary menu.
MENU
LUMENRADIO ON/OFF RADIO MODE RF OUTPUT POWER LINK
SMART
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to LUMENRADIO ON/OFF, and press the right knob to enter the next level menu.
MENU OFF ON
SMART
MENU
LUMENRADIO ON/OFF RADIO MODE RF OUTPUT POWER LINK
SMART
PRESS “MENU” TO RETURN
CH: 512
MENU OFF ON
SMART
PRESS “MENU” TO RETURN
MENU
CH: 512
SMART
SET
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to select ON or OFF, and press the right knob to set. CRMX wireless DMX signals can be received and transmitted when the LUMENRADIO is set to be on.
PRESS “MENU” TO RETURN
CH: 512
26 WWW.NANLUX.COM
RECEIVER MODE ·RATIO MODE Setting
MENU LUMENRADIO ON/OFF RADIO MODE UNLINK
SMART
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to RADIO MODE, and press the right knob to enter the next level menu.
MENU RECEIVER MODE TRANSMITTER MODE
SMART
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to select RECEIVER MODE, and press the right knob to set. ·UNLINK Setting
MENU LUMENRADIO ON/OFF RADIO MODE UNLINK
SMART
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to UNLINK, and press the right knob to enter the next level menu.
MENU RECEIVER MODE TRANSMITTER MODE
SMART
PRESS “MENU” TO RETURN
CH: 512
MENU
SMART
SET
PRESS “MENU” TO RETURN
CH: 512
MENU
SMART
DO YOU WANT TO UNLINK?
NO
YES
PRESS “MENU” TO RETURN
CH: 512
27 WWW.NANLUX.COM
MENU
SMART
DO YOU WANT TO UNLINK?
NO
YES
MENU
SMART
SET
PRESS “MENU” TO RETURN
CH: 512
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to select YES, and press the right knob to set.
·Please refer to P30 of this manual or CRMX wireless DMX transmitter manual, to connect the fixture set in TRANSMITTER MODE or CRMX wireless DMX transmitter with the fixture set in RECEIVER MODE, the fixture will be able to receive CRMX wireless DMX signals for remote control. Note: (1) CRMX wireless DMX transmitter is sold separately. (2) In RECEIVER MODE, the LUMENRADIO SETTINGS should be set to UNLINK to allow it to be reconnected to the new fixtures or transmitters.
TRANSMITTER MODE Set the fixture to TRANSMITTER MODE, and connect with the DMX/RDM console.
MENU LUMENRADIO ON/OFF RADIO MODE UNLINK
SMART
MENU RECEIVER MODE TRANSMITTER MODE
SMART
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to RADIO MODE, and press the right knob to enter the next level menu.
PRESS “MENU” TO RETURN
CH: 512
28 WWW.NANLUX.COM
MENU RECEIVER MODE TRANSMITTER MODE
SMART
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to select TRANSMITTER MODE and press the right knob to set.
ATTENTION:
WHEN USING TRANSMITTER MODE, THE CONTROLLING
RANGE OF NANLINK BLUETOOTH AND 2.4G
WILL BE SHORTEN.
“MENU”
512
·The fixture can be set the RF OUTPUT POWER when it is in TRANSMITTER MODE, the setting methods are as below:
MENU
LUMENRADIO ON/OFF RADIO MODE RF OUTPUT POWER LINK
SMART
MENU
20dBm 16dBm 11dBm 5dBm
SMART
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to RF OUTPUT POWER, and press the right knob to enter the next level menu.
MENU
20dBm 16dBm 11dBm 5dBm
SMART
PRESS “MENU” TO RETURN
CH: 512
MENU
SMART
SET
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to select 20dBm, 16dBm, 11dBm or 5dBm, and press the right knob to set.
PRESS “MENU” TO RETURN
CH: 512
29 WWW.NANLUX.COM
Set other fixtures that need to receive CRMX wireless DMX signals to RECEIVER MODE and set to UNLINK. (For setting method, please refer to P27.) Note: The controlling range of Nanlink Bluetooth and 2.4G remote control will be shortened when set to TRANSMITTER MODE.
Connect the fixture set in TRANSMITTER MODE with the fixture set in RECEIVER MODE. In TRANSMITTER MODE, the signal from the DMX/RDM console or DMX-based APP will be transmitted to the fixtures set in RECEIVER MODE. The fixtures set in TRANSMITTER MODE should be set as below:
MENU
LUMENRADIO ON/OFF RADIO MODE RF OUTPUT POWER LINK
SMART
MENU LINK UNLINK
SMART
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to LINK, and press the right knob to enter the next level menu.
MENU LINK UNLINK
SMART
PRESS “MENU” TO RETURN
CH: 512
MENU
SMART
LINKING…
PRESS “MENU” TO RETURN
CH: 512
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to select LINK, and press the right knob to set.
UNLINK Setting When the fixture needs to stop transmitting the CRMX wireless DMX signal, set the fixture to UNLINK. The setting method is the same as the UNLINK setting on P27.
30 WWW.NANLUX.COM
4.4 ALL WIRELESS ON/OFF
MENU
SMART
OUTPUT MODE
MODIFIER RECOGNITION
ADDRESS/DMX
WIRELESS CONTROL
NETWORK SETTINGS
Art-Net & sACN SETTINGS
CH: 512
Rotate the right knob to WIRELESS CONTROL, and press the right knob to the secondary menu.
MENU
BLUETOOTH SETTINGS 2.4G SETTINGS LUMENRADIO SETTINGS ALL WIRELESS ON/OFF
SMART
PRESS “MENU” TO RETURN
CH: 512
MENU
BLUETOOTH SETTINGS 2.4G SETTINGS LUMENRADIO SETTINGS ALL WIRELESS ON/OFF
SMART
MENU
SMART
DO YOU WANT TO TURN ON OR OFF ALL WIRELESS FUNCTIONS?
NO
YES
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to ALL WIRELESS ON/OFF, and press the right knob to the tertiary menu.
PRESS “MENU” TO RETURN
CH: 512
MENU
SMART
DO YOU WANT TO TURN ON OR OFF ALL WIRELESS FUNCTIONS?
NO
YES
MENU
SMART
SET
PRESS “MENU” TO RETURN
CH: 512
PRESS “MENU” TO RETURN
Rotate the right knob to select ON or OFF, and press the right knob to set. When all wireless functions are set to be on, the Bluetooth, 2.4G and LUMENRADIO settings will be in the ON state. When all wireless functions are set to be off, the Bluetooth, 2.4G and LUMENRADIO settings will be in the OFF state.
CH: 512
31 WWW.NANLUX.COM
4.5 Art-Net & sACN Setting Art-Net & sACN
MENU
SMART
OUTPUT MODE
MODIFIER RECOGNITION
ADDRESS/DMX
WIRELESS CONTROL
NETWORK SETTINGS
Art-Net & sACN SETTINGS
CH: 512
Rotate the right knob to Art-Net & sACN SETTINGS, and press the right knob to the secondary menu.
MENU Art-Net/sACN STATE Art-Net UNIVERSE sACN UNIVERSE
SMART
MENU Art-Net/sACN STATE Art-Net UNIVERSE sACN UNIVERSE
SMART
PRESS “MENU” TO RETURN
MENU Automatic Art-Net sACN OFF
CH: 512
SMART
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to Art-Net / sACN STATE, and press the right knob to the tertiary menu.
MENU
Automatic Art-Net sACN OFF
SMART
PRESS “MENU” TO RETURN
MENU
CH: 512
SMART
SET
PRESS “MENU” TO RETURN
CH: 512
PRESS “MENU” TO RETURN
Rotate the right knob to select Automatic, Art-Net, sACN or OFF, and press the right knob to set. (The fixture will automatically recognize Art-Net or sACN signals based on network signals when Automatic is selected)
CH: 512
32 WWW.NANLUX.COM
Art-Net UNIVERSE Setting
MENU Art-Net/sACN STATE Art-Net UNIVERSE sACN UNIVERSE
SMART
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to Art-Net UNIVERSE, and press the right knob to the tertiary menu.
MENU
SMART
Art-Net Universe 001
NET: 0 SUB: 0 UNI: 1
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to select the needed Art-Net Universe value, and press the right knob to set.
sACN UNIVERSE Setting
MENU Art-Net/sACN STATE Art-Net UNIVERSE sACN UNIVERSE
SMART
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to sACN UNIVERSE, and press the right knob to the tertiary menu.
MENU
SMART
Art-Net Universe 001
NET: 0 SUB: 0 UNI: 1
PRESS “MENU” TO RETURN
CH: 512
MENU
SMART
SET
PRESS “MENU” TO RETURN
CH: 512
MENU
SMART
sACN Universe 001
PRESS “MENU” TO RETURN
CH: 512
33 WWW.NANLUX.COM
MENU
SMART
sACN Universe 001
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to select the needed sACN Universe value.
MENU
SMART
sACN Universe 002
PRESS “MENU” TO RETURN
Press the right knob to set.
CH: 512
MENU
SMART
sACN Universe 002
PRESS “MENU” TO RETURN
CH: 512
MENU
SMART
SET
PRESS “MENU” TO RETURN
CH: 512
34 WWW.NANLUX.COM
Operating Instructions
1. Make sure the power is off, then connect the power supply with cable and
switch it on. If the power indicator is on that means the power input is
normal, the screen will display “NANLUX”.
2. CCT Button: Press the CCT button to enter the CCT MODE.
CCT MODE
SMART
100.0% 5600K 0
DIM
CCT
G/M
CCT EFFECT MENU LOCK
CH: 512
2.1 Brightness Setting: Rotate the left knob, clockwise to increase brightness while anticlockwise to reduce the brightness. The screen shows the percentage of brightness, DIM range: 0.0-100.0%.
CCT MODE
SMART
CCT MODE
SMART
100.0% 5600K 0
DIM
CCT
G/M
0.0% …
100%
0.0% 5600K 0
DIM
CCT
G/M
CH: 512
CH: 512
Note: In other modes, the brightness adjustment range is the same as in CCT
mode. When the fixture function is unlock, in any mode, press the left knob,
the light will be off, the brightness percentage on the screen will be 0.0%,
press again, the fixture restores the previous state, press continuously to
switch the light betweeen on and off.
35 WWW.NANLUX.COM
2.2 CCT Setting: Rotate the middle knob, clockwise to increase color temperature while anticlockwise to reduce the color temperature. The screen shows the CCT, range: 2700K-6500K.
CCT MODE
SMART
CCT MODE
SMART
100.0% 2700K 0
DIM
CCT
G/M
2700K …
6500K
100.0% 6500K 0
DIM
CCT
G/M
CH: 512
CH: 512
Note: In other modes, the CCT adjustment range is the same as in CCT mode. Press the right knob to promptly switch among 2700K, 3200K, 4300K, 5600K, 6500K, which can be toggled in a loop.
2.3 G/M Setting: Rotate the right knob, clockwise to increase G/M value while anticlockwise to reduce the G/M value. The G/M range: -80…+80.
CCT MODE
SMART
CCT MODE
SMART
100.0% 5600K -80
DIM
CCT
G/M
-80
…
100.0% 5600K +80
+80
DIM
CCT
G/M
CH: 512
Note: (1) In other modes, the G/M adjustment range is the same as in CCT mode.
(2) In CCT mode, press the right knob to promptly reset the G/M to 0.
CH: 512
36 WWW.NANLUX.COM
3. EFFECT Button: Press the EFFECT button to enter the EFFECT mode. Evoke 2400B has built-in effects including: CCT Loop, INT Loop, Flash, Pulse, Storm Auto, Storm Manual, TV, Paparazzi, Candle/Fire, Bad Bulb, Firework, Explosion Auto, Explosion Manual and Welding.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: CCT LOOP
CCT1: 3200K CCT2: 5600K
G/M: 0
SPEED: 8s
CYCLE: TWO WAY
ADD-ON: OFF
CH: 512
CCT EFFECT MENU LOCK
left knob
middle knob
right knob
EFFECT MODE
SMART
DIM: 100.0% EFFECT: CCT LOOP
CCT1: 3200K CCT2: 5600K
G/M: 0
SPEED: 8s
CYCLE: TWO WAY
ADD-ON: OFF
CCT L… OOP WELDING
CH: 512 Rotate the middle knob to select the effect, which can be toggled in a loop.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: WELDING
CCT: 5600K
G/M: 0
SPEED: 50
DIMMING RANGE: 0.0% – 100%
PAUSE: OFF
CH: 512
37 WWW.NANLUX.COM
CCT LOOP CCT loop setting, rotate the right knob to select CCT 1 , CCT 2, G/M, SPEED (range: 2s-30s), CYCLE or ADD-ON, and rotate the middle knob to set the parameters.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: CCT LOOP
CCT1: 3200K CCT2: 5600K
G/M: 0
SPEED: 8s
CYCLE: TWO WAY
ADD-ON: OFF
EFFECT MODE
SMART
DIM: 100.0% EFFECT: CCT LOOP
CCT1: 3200K CCT2: 5600K
G/M: 0
SPEED: 8s
CYCLE: TWO WAY
ADD-ON: OFF
CH: 512 Rotate the right knob to select CCT 1 , CCT 2, G/M, SPEED, CYCLE or ADD-ON.
CH: 512
EFFECT MODE
SMART
DIM: 100.0% EFFECT: CCT LOOP
CCT1: 3200K CCT2: 5600K
G/M: 0
SPEED: 8s
CYCLE: TWO WAY
ADD-ON: OFF
EFFECT MODE
SMART
DIM: 100.0% EFFECT: CCT LOOP
CCT1: 3300K CCT2: 5600K
G/M: 0
SPEED: 8s
CYCLE: TWO WAY
ADD-ON: OFF
CH: 512 Rotate the middle knob to set the parameters.
CH: 512
38 WWW.NANLUX.COM
·There are three modes in the CYCLE: ONE WAY, TWO WAY and REVERSE. Rotate the middle knob to select.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: CCT LOOP
CCT1: 3200K SPEED: 8s ADD-ON: OFF
CCT2: 5600K
G/M: 0
CYCLE: ONE WAY
ONE WAY TWO WAY REVERSE
EFFECT MODE
SMART
DIM: 100.0% EFFECT: CCT LOOP
CCT1: 3200K SPEED: 8s ADD-ON: OFF
CCT2: 5600K
G/M: 0
CYCLE: TWO WAY
CH: 512 Rotate the middle knob to set the parameters. Note: (1) When the cycle
mode is in one way or two way, press the right knob to cycle from CCT 1.
(2) When the cycle mode is in reverse, press the right knob to cycle from CCT
2. ·There are four add-on effects in CCT loop: OFF, FLASH, RANDOM FLASH,
PULSE. Rotate the middle knob to select.
CH: 512
EFFECT MODE
SMART
DIM: 100.0% EFFECT: CCT LOOP
CCT1: 3200K CCT2: 5600K
G/M: 0
SPEED: 8s
CYCLE: TWO WAY
ADD-ON: OFF
CH: 512 Rotate the middle knob to set the parameters.
OFF FLASH RANDOM FLASH PULSE
EFFECT MODE
SMART
DIM: 100.0% EFFECT: CCT LOOP
CCT1: 3200K CCT2: 5600K
G/M: 0
SPEED: 8s
CYCLE: TWO WAY
ADD-ON: FLASH
INTERVALS: 1.0s FLASH RATIO: 50
CH: 512
Note: (1) When the ADD-ON is off, there is no additional effect in the CCT loop. (2) When the ADD-ON is FLASH, there is flash effect in the CCT loop, the flash effect can be set by adjusting the INTERVALS (range: 0.1s-10s) and FLASH RATIO (range: 0-100). (3) When the ADD-ON is RANDOM FLASH, there is flash effect in the CCT loop, flash can be set by adjusting the FLASH SPEED (range: 1-100). (4) When the ADD-ON is PULSE, there is pulse effect in the CCT loop, pulse can be set by adjusting the PULSES/MIN (range: 1-240).
39 WWW.NANLUX.COM
INT LOOP INT loop setting, rotate the right knob to select CCT, G/M, SPEED (range: 2s-30s), CYCLE, DIMMING RANGE or ADD-ON, and rotate the middle knob to set the parameters.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: INT LOOP
CCT: 5600K
G/M: 0
SPEED: 8s
CYCLE: TWO WAY
DIMMING RANGE: 50% – 100%
ADD-ON: OFF
EFFECT MODE
SMART
DIM: 100.0% EFFECT: INT LOOP
CCT: 5600K G/M: 0
SPEED: 8s
CYCLE: TWO WAY
DIMMING RANGE: 50% – 100%
ADD-ON: OFF
CH: 512
CH: 512
Rotate the right knob to select CCT, G/M, SPEED, CYCLE, DIMMING RANGE or ADD- ON.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: INT LOOP
CCT: 5600K G/M: 0
SPEED: 8s
CYCLE: TWO WAY
DIMMING RANGE: 50% – 100%
ADD-ON: OFF
EFFECT MODE
SMART
DIM: 100.0% EFFECT: INT LOOP
CCT: 5700K G/M: 0
SPEED: 8s
CYCLE: TWO WAY
DIMMING RANGE: 50% – 100%
ADD-ON: OFF
CH: 512
CH: 512
Rotate the middle knob to set the parameters.
·There are three cycle modes in INT LOOP: ONE WAY, TWO WAY and REVERSE.
There are four add-on effects in INT loop: OFF, FLASH, RANDOM FLASH and PULSE.
Note: (1) The setting method and range of CYCLE and ADD-ON are the same as in
CCT LOOP.
(2) In INT loop, press the right knob to restart cycle.
40 WWW.NANLUX.COM
FLASH Flash setting, rotate the right knob to select CCT, G/M, INTERVALS (range: 0.1s-10s), FLASH RATIO (range: 0-100) or PAUSE, and rotate the middle knob to set the parameters.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: FLASH
CCT: 5600K
G/M: 0
INTERVALS: 1.0s FLASH RATIO: 50 PAUSE: OFF
CH: 512
EFFECT MODE
DIM: 100.0% EFFECT: FLASH CCT: 5600K G/M: 0 INTERVALS: 1.0s FLASH RATIO: 50
PAUSE: OFF
SMART
CH: 512
Rotate the right knob to select CCT, G/M, INTERVALS, FLASH RATIO or PAUSE.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: FLASH
CCT: 5600K G/M: 0
INTERVALS: 1.0s
FLASH RATIO: 50
PAUSE: OFF
EFFECT MODE
DIM: 100.0% EFFECT: FLASH CCT: 5700K G/M: 0 INTERVALS: 1.0s FLASH RATIO: 50
PAUSE: OFF
SMART
CH: 512
CH: 512
Rotate the middle knob to set the parameters. ·Note: The PAUSE includes ON and OFF. When pause is on, the fixture won’t flash.
41 WWW.NANLUX.COM
PULSE Pulse setting, rotate the right knob to select CCT, G/M or PULSES/MIN (range: 1-240), and rotate the middle knob to set the parameters.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: PULSE
CCT: 5600K
G/M: 0
PULSES/MIN: 40
EFFECT MODE
SMART
DIM: 100.0% EFFECT: PULSE
CCT: 5600K G/M: 0
PULSES/MIN: 40
CH: 512 Rotate the right knob to select CCT, G/M or PULSES/MIN.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: PULSE
CCT: 5600K G/M: 0 PULSES/MIN: 40
CH: 512
EFFECT MODE
SMART
DIM: 100.0% EFFECT: PULSE
CCT: 5700K G/M: 0 PULSES/MIN: 40
CH: 512 Rotate the middle knob to set the parameters.
CH: 512
42 WWW.NANLUX.COM
STORM AUTO Storm auto setting, rotate the right knob to select CCT, FLASH TIMES (range: 1-10), INTERVAL RANGE (range: 1s-60s) or PAUSE, and rotate the middle knob to set the parameters.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: STORM AUTO
CCT: 5600K
FLASH TIMES: 3 – 6
INTERVAL RANGE: 2s – 6s PAUSE: OFF
EFFECT MODE
SMART
DIM: 100.0% EFFECT: STORM AUTO
CCT: 5600K
FLASH TIMES: 3 – 6
INTERVAL RANGE: 2s – 6s
PAUSE: OFF
CH: 512
CH: 512
Rotate the right knob to select CCT, FLASH TIMES, INTERVAL RANGE or PAUSE
EFFECT MODE
SMART
DIM: 100.0% EFFECT: STORM AUTO
CCT: 5600K FLASH TIMES: 3 – 6 INTERVAL RANGE: 2s – 6s PAUSE: OFF
CH: 512
Rotate the middle knob to set the parameters.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: STORM AUTO
CCT: 5700K FLASH TIMES: 3 – 6 INTERVAL RANGE: 2s – 6s PAUSE: OFF
CH: 512
43 WWW.NANLUX.COM
STORM MANUAL Storm manual setting, rotate the right knob to select CCT or FLASH TIMES (range: 1-10), and rotate the middle knob to set the parameters, press the right knob to trigger the storm effect.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: STORM MANU
CCT: 5600K FLASH TIMES: 3 – 6
EFFECT MODE
SMART
DIM: 100.0% EFFECT: STORM MANU
CCT: 5600K
FLASH TIMES: 3 – 6
PERSS RIGHT KNOB TO TRIGGER
CH: 512
Rotate the right knob to select CCT or FLASH TIMES.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: STORM MANU
CCT: 5600K
FLASH TIMES: 3 – 6
PERSS RIGHT KNOB TO TRIGGER
CH: 512
EFFECT MODE
SMART
DIM: 100.0% EFFECT: STORM MANU
CCT: 5700K
FLASH TIMES: 3 – 6
PERSS RIGHT KNOB TO TRIGGER
CH: 512
Rotate the middle knob to set the parameters.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: STORM MANU
CCT: 5700K
FLASH TIMES: 3 – 6
PERSS RIGHT KNOB TO TRIGGER
CH: 512
PERSS RIGHT KNOB TO TRIGGER
CH: 512
Press the right knob to trigger the storm effect.
44 WWW.NANLUX.COM
TV TV setting, rotate the right knob to select CCT, G/M, CCT SHIFT (range: 0K- 3000K), SPEED (range: 1-100) or DIMMING RANGE, and rotate the middle knob to set the parameters.
EFFECT MODE
DIM: 100.0% EFFECT: TV
CCT: 5600K
G/M: 0
CCT SHIFT: 600K
SPEED: 50 DIMMING RANGE: 0.0% – 100.0%
SMART
EFFECT MODE
DIM: 100.0% EFFECT: TV
CCT: 5600K
G/M: 0
CCT SHIFT: 600K
SPEED: 50
DIMMING RANGE: 0.0% – 100.0%
SMART
CH: 512
CH: 512
Rotate the right knob to select CCT, G/M, CCT SHIFT (range: 0K-3000K), SPEED (range: 1-100) or DIMMING RANGE.
EFFECT MODE
DIM: 100.0% EFFECT: TV CCT: 5600K G/M: 0 CCT SHIFT: 600K SPEED: 50 DIMMING
RANGE: 0.0% – 100.0%
SMART
CH: 512
Rotate the middle knob to set the parameters.
EFFECT MODE
DIM: 100.0% EFFECT: TV
CCT: 5700K
G/M: 0
CCT SHIFT: 600K
SPEED: 50
DIMMING RANGE: 0.0% – 100.0%
SMART
CH: 512
45 WWW.NANLUX.COM
PAPARAZZI Paparazzi setting, rotate the right knob to select CCT, G/M or SPEED (range:1-100), and rotate the middle knob to set the parameters.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: PAPARAZZI
CCT: 5600K
G/M: 0
SPEED: 50
EFFECT MODE
SMART
DIM: 100.0% EFFECT: PAPARAZZI
CCT: 5600K
G/M: 0
SPEED: 50
CH: 512 Rotate the right knob to select CCT, G/M or SPEED.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: PAPARAZZI
CCT: 5600K
G/M: 0
SPEED: 50
CH: 512
EFFECT MODE
SMART
DIM: 100.0% EFFECT: PAPARAZZI
CCT: 5700K
G/M: 0
SPEED: 50
CH: 512 Rotate the middle knob to set the parameters.
CH: 512
46 WWW.NANLUX.COM
CANDLE/FIRE Candle/fire setting, rotate the right knob to select CCT, G/M, SPEED (range: 1-100), CCT SHIFT (range: 0K-3000K), DIMMING RANGE or FLICKER, and rotate the middle knob to set the parameters.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: CANDLE/FIRE
CCT: 5600K
G/M: 0
SPEED: 50
CCT SHIFT: 600K
DIMMING RANGE: 0.0% – 100.0%
FLICKER: OFF
EFFECT MODE
SMART
DIM: 100.0% EFFECT: CANDLE/FIRE
CCT: 5600K
G/M: 0
SPEED: 50
CCT SHIFT: 600K
DIMMING RANGE: 0.0% – 100.0%
FLICKER: OFF
CH: 512
CH: 512
Rotate the right knob to select CCT, G/M, SPEED, CCT SHIFT, DIMMING RANGE or FLICKER.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: CANDLE/FIRE
CCT: 5600K G/M: 0
SPEED: 50
CCT SHIFT: 600K
DIMMING RANGE: 0.0% – 100.0%
FLICKER: OFF
CH: 512
Rotate the middle knob to set the parameters.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: CANDLE/FIRE
CCT: 5700K
G/M: 0
SPEED: 50
CCT SHIFT: 600K
DIMMING RANGE: 0.0% – 100.0%
FLICKER: OFF
CH: 512
Note: The FLICKER includes ON and OFF. When the filcker is on, there is flicker in the candle/fire effect.
47 WWW.NANLUX.COM
BAD BULB Bad bulb setting, rotate the right knob to select CCT, G/M, INTENSITY (range: 1-100) or SPEED (range: 1-100), and rotate the middle knob to set the parameters.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: BAD BULB
CCT: 5600K
G/M: 0
INTENSITY: 50
SPEED: 50
CH: 512
EFFECT MODE
SMART
DIM: 100.0% EFFECT: BAD BULB
CCT: 5600K
G/M: 0
INTENSITY: 50
SPEED: 50
CH: 512
Rotate the right knob to select CCT, G/M, INTENSITY or SPEED.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: BAD BULB
CCT: 5600K
G/M: 0
INTENSITY: 50
SPEED: 50
CH: 512
Rotate the middle knob to set the parameters.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: BAD BULB
CCT: 5700K
G/M: 0
INTENSITY: 50
SPEED: 50
CH: 512
48 WWW.NANLUX.COM
FIREWORK Firework setting, rotate the right knob to select CCT, G/M, CCT SHIFT (range: 0K-3000K), SPEED (range: 1-100) or DECAY (range: 1-100), and rotate the middle knob to set the parameters.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: FIREWORK
CCT: 5600K G/M: 0 CCT SHIFT: 600K SPEED: 50 DECAY: 50
CH: 512
Rotate the right knob to select CCT, G/M, CCT SHIFT, SPEED or DECAY.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: FIREWORK
CCT: 5600K G/M: 0
CCT SHIFT: 600K
SPEED: 50
DECAY: 50
CH: 512
EFFECT MODE
SMART
DIM: 100.0% EFFECT: FIREWORK
CCT: 5600K G/M: 0
CCT SHIFT: 600K
SPEED: 50
DECAY: 50
CH: 512
Rotate the middle knob to set the parameters.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: FIREWORK
CCT: 5700K G/M: 0
CCT SHIFT: 600K
SPEED: 50
DECAY: 50
CH: 512
49 WWW.NANLUX.COM
EXPLOSION AUTO Explosion auto setting, rotate the right knob to select CCT, G/M, SPEED (range:1-100) or DECAY (range:1-100), and rotate the middle knob to set the parameters.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: EXPLOSION AUTO
CCT: 5600K
G/M: 0
SPEED: 50
DECAY: 50
CH: 512
Rotate the right knob to select CCT, G/M, SPEED or DECAY.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: EXPLOSION AUTO
CCT: 5600K
G/M: 0
SPEED: 50 DECAY: 50
CH: 512
EFFECT MODE
SMART
DIM: 100.0% EFFECT: EXPLOSION AUTO
CCT: 5600K
G/M: 0
SPEED: 50
DECAY: 50
CH: 512
Rotate the middle knob to set the parameters.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: EXPLOSION AUTO
CCT: 5700K
G/M: 0
SPEED: 50
DECAY: 50
CH: 512
50 WWW.NANLUX.COM
EXPLOSION MANUAL Explosion manual setting, rotate the right knob to select CCT, G/M or DECAY (range: 1-100), and rotate the middle knob to set the parameters.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: EXPLOSION MANU
CCT: 5600K
G/M: 0
DECAY: 50
EFFECT MODE
SMART
DIM: 100.0% EFFECT: EXPLOSION MANU
CCT: 5600K
G/M: 0
DECAY: 50
PERSS RIGHT KNOB TO TRIGGER
CH: 512
Rotate the right knob to select CCT, G/M or DECAY.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: EXPLOSION MANU
CCT: 5600K
G/M: 0
DECAY: 50
PERSS RIGHT KNOB TO TRIGGER
CH: 512
EFFECT MODE
SMART
DIM: 100.0% EFFECT: EXPLOSION MANU
CCT: 5700K
G/M: 0
DECAY: 50
PERSS RIGHT KNOB TO TRIGGER
CH: 512
Rotate the middle knob to set the parameters.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: EXPLOSION MANU
CCT: 5700K
G/M: 0
DECAY: 50
PERSS RIGHT KNOB TO TRIGGER
CH: 512
PERSS RIGHT KNOB TO TRIGGER
CH: 512
Press the right knob to trigger explosion.
51 WWW.NANLUX.COM
WELDING Welding settings, rotate the right knob to select CCT, G/M, SPEED (range: 1-100), DIMMING RANGE or PAUSE, and rotate the middle knob to set the parameters.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: WELDING
CCT: 5600K
G/M: 0
SPEED: 50
DIMMING RANGE: 0.0% – 100%
PAUSE: OFF
CH: 512
Rotate the right knob to select CCT, G/M, SPEED, DIMMING RANGE or PAUSE.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: WELDING
CCT: 5600K G/M: 0
SPEED: 50
DIMMING RANGE: 0.0% – 100%
PAUSE: OFF
CH: 512
EFFECT MODE
SMART
DIM: 100.0% EFFECT: WELDING
CCT: 5600K G/M: 0
SPEED: 50
DIMMING RANGE: 0.0% – 100% PAUSE: OFF
EFFECT MODE
SMART
DIM: 100.0% EFFECT: WELDING
CCT: 5700K G/M: 0
SPEED: 50
DIMMING RANGE: 0.0% – 100% PAUSE: OFF
CH: 512
CH: 512
Rotate the middle knob to set the parameters.
Note: The PAUSE includes ON and OFF. When the pause is ON, the welding effect will suspend. ·Lighting effects and additional functionality will be probably upgraded with later firmware version. Detailed information is subject to the latest firmware function instruction.
52 WWW.NANLUX.COM
4. MENU Button: Press the MENU button to enter the interface of menu. Rotate the right knob to select the needed options, press the right knob to enter the secondary menu, and rotate the right knob again to select the options and press the right knob to set. Press the MENU button to return to the previous menu.
MENU
SMART
OUTPUT MODE
MODIFIER RECOGNITION
ADDRESS/DMX
WIRELESS CONTROL
NETWORK SETTINGS
Art-Net & sACN SETTINGS
CH: 512
left knob
middle knob
right knob
CCT EFFECT MENU LOCK
4.1 OUTPUT MODE
MENU
SMART
OUTPUT MODE
MODIFIER RECOGNITION
ADDRESS/DMX
WIRELESS CONTROL
NETWORK SETTINGS
Art-Net & sACN SETTINGS
CH: 512
Rotate the right knob to OUTPUT MODE, and press the right knob to enter the secondary menu.
MENU MAX OUTPUT CONSTANT OUTPUT
SMART
PRESS “MENU” TO RETURN
CH: 512
53 WWW.NANLUX.COM
MENU MAX OUTPUT CONSTANT OUTPUT
SMART
MENU
SMART
SET
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to select MAX OUTPUT or CONSTANT OUTPUT, and press the right knob to set. 4.2 MODIFIER RECOGNITION
MENU
SMART
OUTPUT MODE
MODIFIER RECOGNITION
ADDRESS/DMX
WIRELESS CONTROL
NETWORK SETTINGS
Art-Net & sACN SETTINGS
CH: 512
Rotate the right knob to MODIFIER RECOGNITION, and press the right knob to enter the secondary menu.
MENU OFF ON
SMART
PRESS “MENU” TO RETURN
MENU OFF ON
PRESS “MENU” TO RETURN
MENU
SET
CH: 512
SMART
CH: 512
SMART
PRESS “MENU” TO RETURN
CH: 512
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to select ON or OFF.
·When the modifier recognition is off, please ensure the modifier should match the fixture’s COB size and work normally to avoid dangerous situations.
·When the modifier recognition is on, only the NL mount modifier that with electronic contacts and by correct installation can be recognized by the fixture.
If the modifier cannot be recognized, the brightness will be 0%.
54 WWW.NANLUX.COM
4.3 ADDRESS/DMX For more operation details please refer to P15.
4.4 WIRELESS CONTROL For more operation details please refer to P21.
4.5 NETWORK SETTINGS
MENU
SMART
OUTPUT MODE
MODIFIER RECOGNITION
ADDRESS/DMX
WIRELESS CONTROL
NETWORK SETTINGS
Art-Net & sACN SETTINGS
CH: 512
Rotate the right knob to NETWORK SETTINGS, and press the right knob to enter the secondary menu.
NETWORK MODE
MENU NETWORK MODE IP ADDRESS SUBNET MASK GATEWAY ADDERSS MAC ADDRESS
SMART
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to NETWORK MODE, and press the right knob to enter the tertiary menu.
MENU NETWORK MODE IP ADDRESS SUBNET MASK GATEWAY ADDERSS MAC ADDRESS
PRESS “MENU” TO RETURN
SMART
CH: 512
MENU
DHCP Art-Net 2 . x . x . x Art-Net 10 . x . x . x MANUAL
SMART
PRESS “MENU” TO RETURN
CH: 512
55 WWW.NANLUX.COM
MENU
DHCP Art-Net 2 . x . x . x Art-Net 10 . x . x . x MANUAL
SMART
MENU
SMART
SET
PRESS “MENU” TO RETURN
CH: 512
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to select the needed network mode, and press the right
knob to set.
Note: When DHCP or Art-Net is selected, the IP ADDRESS, SUBNET MASK and
GATEWAY ADDRESS will be set automatically. When MANUAL is selected, the IP
ADDRESS, SUBNET MASK and GATEWAY ADDRESS can be set manually.
IP ADDRESS
MENU
NETWORK MODE IP ADDRESS SUBNET MASK GATEWAY ADDRESS MAC ADDRESS
SMART
MENU
SMART
IP ADDRESS 196 . 168 . 0 . 0
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to IP ADDRESS, and press the right knob to enter the tertiary menu.
MENU
SMART
PRESS “MENU” TO RETURN
MENU
CH: 512
SMART
IP ADDRESS 196 . 168 . 0 . 0
IP ADDRESS 196 . 169 . 0 . 0
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to the bytes, and rotate the middle knob to select the needed IP address.
PRESS “MENU” TO RETURN
CH: 512
56 WWW.NANLUX.COM
MENU
SMART
IP ADDRESS 196 . 169 . 0 . 0
MENU
SMART
SET
PRESS “MENU” TO RETURN
Press the right knob to set.
SUBNET MASK
MENU NETWORK MODE IP ADDRESS SUBNET MASK GATEWAY ADDRESS MAC ADDRESS
CH: 512
SMART
PRESS “MENU” TO RETURN
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to SUBNET MASK, and press the right knob to enter the tertiary menu.
MENU
SMART
CH: 512
MENU
SMART
SUBNET MASK 255 . 255 . 255. 0
PRESS “MENU” TO RETURN
CH: 512
MENU
SMART
SUBNET MASK 255 . 255 . 255. 0
SUBNET MASK 255 . 254 . 255. 0
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to the subnet, and rotate the middle knob to select the needed subnet mask.
PRESS “MENU” TO RETURN
CH: 512
57 WWW.NANLUX.COM
MENU
SMART
SUBNET MASK 255 . 254 . 255. 0
MENU
SMART
SET
PRESS “MENU” TO RETURN
Press the right knob to set.
GATEWAY ADDRESS
MENU NETWORK MODE IP ADDRESS SUBNET MASK GATEWAY ADDRESS MAC ADDRESS
CH: 512
SMART
PRESS “MENU” TO RETURN
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to GATEWAY ADDRESS, and press the right knob to enter the tertiary menu.
MENU
SMART
CH: 512
MENU
SMART
CATEWAY ADDRESS 192 . 168 . 0. 100
PRESS “MENU” TO RETURN
CH: 512
MENU
SMART
CATEWAY ADDRESS 192 . 168 . 0. 100
CATEWAY ADDRESS 192 . 169 . 0. 100
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to the bytes, and rotate the middle knob to select the needed gateway address.
PRESS “MENU” TO RETURN
CH: 512
58 WWW.NANLUX.COM
MENU
SMART
CATEWAY ADDRESS 192 . 169 . 0. 100
PRESS “MENU” TO RETURN
Press the right knob to set.
MAC ADDRESS
MENU NETWORK MODE IP ADDRESS SUBNET MASK GATEWAY ADDRESS MAC ADDRESS
CH: 512
SMART
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to MAC ADDRESS, and press the right knob to check.
4.6 Art-Net & sACN For more operation details please refer to P32.
MENU
SMART
SET
PRESS “MENU” TO RETURN
CH: 512
MENU
SMART
MAC ADDRESS 94-72-OF-00-00-01
PRESS “MENU” TO RETURN
CH: 512
59 WWW.NANLUX.COM
4.7 FAN CONTROL
MENU
SMART
MODIFIER RECOGNITION
ADDRESS/DMX
WIRELESS CONTROL
NETWORK SETTINGS
Art-Net & sACN SETTINGS
FAN CONTROL
CH: 512
Rotate the right knob to FAN CONTROL, and press the right knob to enter the secondary menu.
MENU
SMART FULL SPEED LOW SPEED OFF
SMART
MENU SMART FULL SPEED LOW SPEED OFF
PRESS “MENU” TO RETURN
MENU
SMART
CH: 512
SMART
SET
PRESS “MENU” TO RETURN
CH: 512
PRESS “MENU” TO RETURN
Rotate the right knob to select speed: SMART, FULL SPEED, LOW SPEED or OFF,
and press the right knob to set.
Note: When the fan is off, the built-in fan will stop working, and the maximum
output of fixture will be 15%. When the fan is in low speed, the maximum
output is 50%. When the fan is in smart or full speed state, the maximum
output is 100%.
CH: 512
60 WWW.NANLUX.COM
4.8 ROTATE SCREEN
MENU
SMART
ADDRESS/DMX
WIRELESS CONTROL
NETWORK SETTINGS
Art-Net & sACN SETTINGS
FAN CONTROL
ROTATE SCREEN
CH: 512
Rotate the right knob to the ROTATE SCREEN, and press the right knob to enter the secondary menu.
MENU
SMART
DO YOU WANT ROTATE SCREEN?
NO
YES
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to select YES or NO, and press the right knob to set.
4.9 SCREEN BRIGHTNESS
MENU
SMART
WIRELESS CONTROL
NETWORK SETTINGS
Art-Net & sACN SETTINGS
FAN CONTROL
ROTATE SCREEN
SCREEN BRIGHTNESS
CH: 512
Rotate the right knob to SCREEN BRIGHTNESS, and press the right knob to enter the secondary menu.
SMART
MENU
SMART
DO YOU WANT ROTATE SCREEN?
NO
YES
PRESS “MENU” TO RETURN
CH: 512
CH: 512
SET
MENU
MENU
SMART
SCREEN BRIGHTNESS 1
PRESS “MENU” TO RETURN
CH: 512
61 WWW.NANLUX.COM
MENU
SMART
SCREEN BRIGHTNESS 1
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to select the screen brightness, and press the right knob to set.
4.10 BUTTON BACKLIGHT
MENU
SMART
NETWORK SETTINGS
Art-Net & sACN SETTINGS
FAN CONTROL
ROTATE SCREEN
SCREEN BRIGHTNESS
BUTTON BACKLIGHT
CH: 512
Rotate the right knob to BUTTON BACKLIGHT, and press the right knob to enter the secondary menu.
MENU OFF ON
SMART
MENU
SMART
SET
PRESS “MENU” TO RETURN
CH: 512
MENU OFF ON
SMART
PRESS “MENU” TO RETURN
MENU
CH: 512
SMART
SET
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to select ON or OFF, and press the right knob to set.
PRESS “MENU” TO RETURN
CH: 512
62 WWW.NANLUX.COM
4.11 LANGUAGE
MENU
SMART
Art-Net & sACN SETTINGS
FAN CONTROL
ROTATE SCREEN
SCREEN BRIGHTNESS
BUTTON BACKLIGHT
LANGUAGE
CH: 512
Rotate the right knob to LANGUAGE, and press the right knob to enter the secondary menu.
MENU
ENGLISH
SMART
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to select ENGLISH or , and press the right knob to set.
MENU
ENGLISH
SMART
PRESS “MENU” TO RETURN
CH: 512
MENU
SMART
PRESS “MENU” TO RETURN
CH: 512
63 WWW.NANLUX.COM
4.12 FIRMWARE UPDATE Put the three firmware files into the root directory of the USB drive (ensure the firmware versions match), and insert the USB drive to the USB port.
MENU
FAN CONTROL ROTATE SCREEN SCREEN BRIGHTNESS BUTTON BACKLIGHT LANGUAGE FIRMWARE
UPDATE
SMART
CH: 512
MENU
SMART
SEARCHING FOR FIRMWARE FILE
……
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to FIRMWARE UPDATE, and press the right knob to enter
the interface to search for the firmware files.
Note: Please do not rename the firmware files. Ensure the USB drive is
formatted to FAT, FAT32 or exFAT. If prompted that “THE VERSIONS OF THE THREE
FIRMWARE FILES DON’T MATCH, PLEASE CHECK THE FILES AND TRY AGAIN”, please
check whether
the versions of the three firmware files are consistent. If prompted that
“MISSING PARTS OF FIRMWARE FILES, PLEASE CHECK THE FILES AND TRY AGAIN”,
please check whether there are three firmware files
in the USB drive. If prompted that “NO FIRMWARE FOUND”, please check whether
the firmware files are correct, whether the firmware files are put in the root
directory of the USB
drive, or whether the USB drive format is FAT, FAT32 or exFAT. If all the
above steps are done and the firmware files still cannot be found, please
format the USB drive again. If the fixture still cannot identify the USB
drive, please replace the USB drive.
MENU
SMART
MENU
SMART
FOUND FIRMWARE V0.00.13
BACK UPDATE
FIRMWARE UPDATED ……
PRESS “MENU” TO RETURN
CH: 512
PRESS “MENU” TO RETURN
CH: 512
After the firmware file is found, enter the firmware update interface, rotate the right knob to select UPDATE, and press the right knob to make update.
After update, the fixture will automatically restart.
64 WWW.NANLUX.COM
MENU
SMART
FIRMWARE UPDATED ……
PRESS “MENU” TO RETURN
CH: 512
4.13 RESET ALL SETTINGS
MENU
ROTATE SCREEN SCREEN BRIGHTNESS BUTTON BACKLIGHT LANGUAGE FIRMWARE UPDATE
RESET ALL SETTINGS
SMART
CH: 512
Rotate the right knob to RESET ALL SETTINGS, and press the right knob to enter the secondary menu.
MENU
SMART
RESET ALL SETTINGS OF THIS LIGHT?
NO
YES
PRESS “MENU” TO RETURN
CH: 512
Rotate the right knob to select YES or NO, and press the right knob to set.
MENU
SMART
RESET ALL SETTINGS OF THIS LIGHT?
NO
YES
PRESS “MENU” TO RETURN
CH: 512
MENU
SMART
SET
PRESS “MENU” TO RETURN
CH: 512
65 WWW.NANLUX.COM
4.14 VERSION
MENU
SCREEN BRIGHTNESS BUTTON BACKLIGHT LANGUAGE FIRMWARE UPDATE RESET ALL SETTINGS
VERSION
SMART
CH: 512
Rotate the right knob to VERSION, and press the right knob to check the current version.
MENU
SMART
VERSION: 1.01.13
To update, please plug in USB drive that has the new firmware,
and choose the FIRMWARE UPDATE option in the menu. www.nanlux.com
PRESS “MENU” TO RETURN
CH: 512
5. LOCK Button: Long press the LOCK button to lock the settings. At this moment, any operation or adjustment on the button and knob will not change the current setting. Long press the LOCK button again to unlock.
EFFECT MODE
SMART
DIM: 100.0% EFFECT: CCT LOOP
CCT1: 3200K CCT2: 5600K
G/M: 0
SPEED: 8s
CYCLE: TWO WAY
ADD-ON: OFF
EFFECT MODE
SMART
DIM: 100.0% EFFECT: CCT LOOP
CCT1: 3200K CCT2: 5600K
G/M: 0
SPEED: 8s
CYCLE: TWO WAY
ADD-ON: OFF
CH: 512
CH: 512
locked
CCT EFFECT MENU LOCK
6. When the fixture is not in use, please turn off the power switch.
66 WWW.NANLUX.COM
General Fault Detection and Diagnosis
Fault Detection
The light won’t boot up properly.
The fixture can be operated manually, but DMX control is not working. The
display screen is on, but the fixture cannot be operated. The fan doesn’t
work.
The signal receiving distance of 2.4G and Bluetooth is less than 5 meters.
The display screen is on, but the fixture doesnot shed light.
Diagnosis 1. Please check whether the connection between power supply and
cable or fixture are loose. 2. Please check whether the voltage value of power
supply is within the specified range. 1. Please check whether the DMX address
setting is correct. 2. Please check whether the DMX cable is connected
correctly and without damage.
Please check if the screen shows . Long press the LOCK button for 3s to
unlock.
Please check if the fan is OFF. Please check whether the LumenRadio is in
transmitter mode, if so, please set the LumenRadio to unlink, and set it in
receiver mode.
1. Please check if the fixture is installed with modifier / accessory or if
they are not compatible with the fixture.
2. Please check if the modifier / accessory can’t be recognized, if so,
please align the electronic contacts on the modifier / accessory with those on
the fixture.
Other Optional Kits
Evoke 2400B Flight Case Kit (for CN, UK, AU, EU, KR):
Evoke 2400B×1 Yoke×1 Power Supply×1 RF-NLM-45-EV2400 Reflector 45°×1 USB Flash
Drive×1 AS-CP-QR-EV Quick Release Clamp×1
WS-RC-C2 Remote Controller×1 DC Connection Cable×1 AC Power Cable×1 User Manual×1 CC-EV2400-FT Flight Case×1
67 WWW.NANLUX.COM
Evoke 2400B Flight Case Kit (for US, JP):
Evoke 2400B×1 Yoke×1 Power Supply×1 RF-NLM-45-EV2400 Reflector 45°×1 USB Flash
Drive×1 AS-CP-QR-EV Quick Release Clamp×1
Evoke 2400B Carton Packaging (for CN, UK, AU, EU, KR):
Evoke 2400B×1 Yoke×1 Power Supply×1 RF-NLM-45-EV2400 Reflector 45°×1 USB Flash
Drive×1
WS-RC-C2 Remote Controller×1 DC Connection Cable×1 AC Cable with Edison
Connector for (US,JP)×1 AC Cable (with bare ends)×1 User Manual×1 CC-EV2400-FT
Flight Case×1
AS-CP-QR-EV Quick Release Clamp×1 WS-RC-C2 Remote Controller×1 DC Connection
Cable×1 AC Power Cable×1 User Manual×1
68 WWW.NANLUX.COM
Evoke 2400B Carton Packaging (for US, JP):
Evoke 2400B×1 Yoke×1 Power Supply×1 RF-NLM-45-EV2400 Reflector 45°×1 USB Flash
Drive×1 AS-CP-QR-EV Quick Release Clamp×1
WS-RC-C2 Remote Controller×1 DC Connection Cable×1 AC Cable with Edison Connector (US,JP) ×1 AC Cable (with bare ends)×1 User Manual×1
Optional Purchase
RF-NLM-45-EV2400 Reflector 45° FL-28 Fresnel Lens SB-NLM-150-PR Parabolic
Softbox 150cm with NL Mount (with electronic contacts) SB-NLM-100-S Square
Softbox 100cm with NL Mount (with electronic contacts) SB-NLM-120-PR Parabolic
Softbox 120cm with NL Mount (with electronic contacts) SB-NLM-150-O Octagonal
Softbox 150cm with NL Mount (with electronic contacts) LT-NLM-120 Lantern
Softbox 120cm with NL Mount (with electronic contacts)
69 WWW.NANLUX.COM
Please scan the QR code for more details.
DMX Reference Guide
Detailed User Manual
Nanlux Website
Nanlink App
This manual has been compiled according to the rigorous testing for Nanlux products. Product designs are subject to change without prior notice. The latest version of the manual for this product is downloadable at www.nanlux.com.
70 WWW.NANLUX.COM
Certification
Made in China
71 WWW.NANLUX.COM
WWW.NANLUX.COM
0754-85751187 0754-85300887
[email protected] Dongli Section, Highway 324, Chenghai, Shantou City, Guangdong Province, China