Minketerss A16 Car Air Pump User Manual

Minketerss A16 Car Air Pump

Thank you

Thank you for purchasing this device.
Prior to use, read and understand product safety information booklet and this user manual.

WARNINGS

Warnings!

1. Please keep this device away from children.
2. Read and understand all safety information before using.
3. Please check this device carefully before using. Do not use it if found any unusual situations.

Warnings! Make sure to set correct pressure

1. The correct pressure is important.
2. This device is not suitable for tires that require high capacity/high pressure.
3. Before setting pressure, please make sure to set the correct pressure unit, otherwise it may lead to a tire explosion and other accidents.
4. Please make sure that the tire is inflated according to automobile manufacturer recommended tire pressure and check the spare tire regularly.

Warnings! It could be dangerous if improper use

1. Please use this device in a safe area.
2. Please use this device in a dry and clean environment. Mud and dust intrusion may damage this device.
3.  Do not break the air tube while inflating and keep the air flow clear.
4. When this device is working, the operator shall not leave and observe the charging process to prevent the charging pressure from being too high without presetting pressure.
5. It may be dangerous to be under-inflated or over-inflated(Do not over-inflated).
6. This device is built in de motor, which may cause electric spark when working, please do not use it in inflammable and explosive environment.
7. The temperature of the air tube will be high if works too long. If this device gives abnormal noise or temperature is too high, please turn off immediately and wait for it to cool down before using.
8. Do not recommend to continue using this device for more than 10 minutes at a time. Please turn off immediately and wait for it to cool down before using.
9. When charging this device, please use CCC certified or other chargers.
10. Th is device is no-waterproof and do not flush with water.

PRODUCT OVERVIEW

• **Charging cable

**

• DC 12V charger
  

• **Air hose

**

• Inflatable needle
  

• **Inflatable nozzle switcher

**

• French inflatable nozzle
  

PRODUCT SPECIFICATIONS

Model : A16
Type-C input : 5V 2A
DC input: 12V 10A
USB output: 5V=2.1A
Battery: 2500mAhx3/27.75Wh
Accessories : Inflatable nozzle switcher, Inflatable needle
Power: 120W
DC cable Length : 3M
Noise: 85dB
Working temperature : 0°C-35°C
French inflatable nozzle, Air hose, DC 12V charger, Charging cable

HOW TO USE SWITCH

Power switch: long press power switch 2 seconds enter into standby state, click again to start inflating; after inflation(when the pressure reaches preset pressure, this device will stop working automatically), long press power switch 2 seconds again to turn off.
Function switch : click the function switch to set different inflatable objects(car, motorcycle, bicycle, ball, customize) and different inflatable pressures(psi, bar, kpa, kg/cm2).
LED switch : long press the LED switch 2 seconds to turn on, click to switch SOS and spotlight, long press the LED switch 2 seconds again to turn off.
Pressure+ switch : pressure increases with each click.
Pressure – switch : pressure decreases with each click.

Note : LED can be used whether this device is on/off.

SCREEN DISPLAY

1. Long press power switch 2 seconds, the screen will light up (as shown in the picture). then the display will stay on the car icon(the default setting for the first time).
2. Click function switch to set different inflatable objects, the screen will display preset pressure of the corresponding inflatable object.
3. DC power supply: DC mark is light-> car is innormal voltge; screen display “UL” -> car is in low voltage; screen display “UH”-> car is in high voltage.
4. Battery power supply: when the battery is less than 5%, battery symbol is white flashing and first, second, third and fourth cell are off; When the battery is too low, screen displays “LO” and then this device turns off; When this device is charging, battery symbol 4 cell is flashing one by one; When this device is full, battery symbol 4 cell is white.

HOW TO USE CAR AIR PUMP(DC POWER SUPPLY)

1. Start the car, connect DC 12V charger to car cigarette lighter and this device;
2. Connect inflatable nozzle to inflatable object(set corresponding inflatable nozzle according to inflatable object);
3. Long press power switch 2 seconds enter into standby state;
4. Click function switch enter into preset state;
5. Click function switch again and set inflatable objects one by one;
6. Long press function switch 2 seconds, the inflatable pressure icon will flash, then click function switch to set corresponding inflatable pressure one by one; (You can set inflatable pressure only when the inflatable pressure icon flashes. The inflatable pressure icon will stop flashing if there is no operation within 2 seconds, you need to long press function switch 2 seconds again and set again.)
7. If preset pressure matches to inflatable object, click power switch to inflate; If preset pressure doesn’t match to inflatable object, click pressure+ switch or pressure – switch to set matchable pressure and then click power switch to inflate;
8. After inflation, long press power switch 2 seconds to turn off and remove the inflatable nozzle.

HOW TO USE CAR AIR PUMP (BATTERY POWER SUPPLY)

1. Connect inflatable nozzle to inflatable object(set corresponding inflatable nozzle according to inflatable object);
2. Long press power switch 2 seconds enter into standby state;
3. Click function switch enter into preset state;
4. Click function switch again and set inflatable objects one by one;
5. Long press function switch 2 seconds, the inflatable pressure icon will flash, then click function switch to set corresponding inflatable pressure one by one; (You can set inflatable pressure only when the inflatable pressure icon flashes. The inflatable pressure icon will stop flashing if there is no operation within 2 seconds, you need to long press function switch 2 seconds again and set again.)
6. If preset pressure matches to inflatable object, click power switch to inflate; If preset pressure doesn’t match to inflatable object, click pressure+ switch or pressure – switch to set matchable pressure and then click power switch to inflate;
7. After inflation, long press power switch 2 seconds to turn off and remove the inflatable nozzle.

INFLATABLE NOZZLE SET

1. Upward open and take out inflatable nozzle site;
2. Downward close accessories storage bin.

HOW TO CHARGE CAR AIR PUMP

When this device is in turn off state, connect USB-C charging cable to this device to begin charging.(DC 12V charger can’t be used to charge this device)

FREQUENTLY ASKED QUESTIONS

Q: This device does not stop when it reaches to preset pressure
A: 1. Check whether to operate correctly according to the set instructions.
2. Check whether the preset pressure is correct.
Q: The screen display is inaccurate or unavailable
A: After connect this device to inflatable object, please make sure the screen
show real-time pressure before start to inflate.
Q: This device is working but unable to inflate
A: Check inflatable nozzle is properly connected to inflatable object.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>