Shenzhen Kailige Technology Co Ltd 2A36KZ10 Wireless Earbuds Bluetooth Headphones 36H Playtime Ear Buds User Manual
- June 1, 2024
- Shenzhen Kailige Technology Co Ltd
Table of Contents
2A36KZ10 Wireless Earbuds Bluetooth Headphones 36H Playtime Ear Buds
TRUE WIRELESS EARPHONES
Z10 User Manual
WELCOME
Thank you for choosing Eumspo S2 True Wireless Earphones.
Please read below instructions carefully before use.t will
help you set up and operate this product properly and enjoy
the tidvanced features.
PACKAGE INCLUDE
PRODUCT DESCRIPTION
USAGE TIPS
For your best audio and wear experience, please wear the
left and right earphone correctly and choose the ear-tips
that best suits for your ear.
HOW TO TURN ON/OFF EARPHONES
POWER OFF:
-
Please put the bluetooth earphones into the charging
case, it will automatically switch off. -
Please keep the earphones touch button pressed for
5 seconds, untilthe green indicator flashes once with
voice prompt “power off”.
HOW TO CONNECT
1.DUAL EAR MODE
-
Take out the earphones from charging case, they will
‘automatically power on, pairing and the indicator fight
will flash quickly. -
if pairing successfully, the green indicator light will turn off.
-
Activate your device’s bluetooth function, setting
bluetooth-activate. -
Use your bluetooth item to search “S2” clickit and there
will a voice prompt “Connected”.
2.SINGLE EAR MODE
-
Take out one earphone from the charging case and it will
‘automatically power on. -
Activate your device’s bluetooth function and search for “S2”.
-
Click it and there will a voice prompt “Connected”.
EARPHONES OPERATION
VOLUME+/-
Click the button once to adjust the volume
(“Left earphone” for decreasing, “Right earphone” for increasing)
Voice Assistant
Click the touch button three times to activate the Siri
voice assistant.
MUSIC
Play/Pause
Click the touch twice to play/pause the music
Prevoius/Next Song
Press the touch button for 1.5 seconds and release it
(“Left earphone” for previous song, “Right earphone” for next song)
HOW TO CHARGE
When the earphones emit a “Battery Low” beep as a low battery
alarm, you can conveniently place them into the charging case for
automatic recharging. This will ensure that the earphones are
charged and ready for use.
It is recommended to gently wipe the spring needle and copper
column with a cotton swab on a regular basis to achieve a cleaning
effect. Never use liquids to clean the earbuds
Note: When the earbuds is not cha分rging, you can use a cotton
swab to gently wipe the spring needle and copper post.
TROUBLESHOOTING
1.The earphones can’t power on
How to fix it:
Charge the earbuds/Keep the earphones touch button pressed
for 8 seconds.
2.0nly one earphone has sound
How to fix it:
- Check if it is pairing un呾,cce突ful between L and R earbuds.
- Put the earphones into the charging case. take out the pairing again.\
3. The two earphones have no sound
How to fix it:
- Check if it is correctly connected with the phone
- Check the earphones battery whether was run out of.
- Increase the volume of the earphones and mobile devices
(or music playback applications).
4.The earphones cannot be connected to the smart device
How to fix it:
-
Confirm the status of the Bluetooth function.
-
Turn off Bluetooth function of your device. delete the
historical connection and connect again. -
Or please try to connect other accessories device.
WARNING
-
Host device is a connection between s6cond device and
your mobile phone it is normal status under high power
condumption. -
When not conn6ct的to any device, the earphones will
power off automatically after 5 minutes. -
Use only 5V/1A power supply. Connecting the power
supply voltage too high may cause serious damage. -
When the earphones and the charger case are not used for
long periods of time, it is recommended to keep them in a
dry place and to recharge them at least every 2 months.
PRODUCT FUNCTION
Model: S2
Version: 5.3
Charging Case Battery: 380mAh
Capacity of Ea『buds: 40mAh
Headphone Cha『ge Time: About 1.5Hrs
Music Playing Time: About6Hrs
Profiles Supported: HFP/A2DP/AVRCP
Operating Frequency: 2.40 GHZ-2.48 GHZ
RF Sensitivity: -94.5 dBm
Working Temperature Range: -10+50°C
Maximum Transmission Range: < 33 feet (NO obstacle)