Liu Sheng X9 Mini Video Camera User Manual
- June 1, 2024
- Liu Sheng
Table of Contents
Liu Sheng X9 Mini Video Camera
Product Information
- Specifications:
- Compliance: FCC’s RF Exposure guidelines
- Minimum Distance: 20cm from the body
- Antenna: Must not be co-located or operated with any other antenna or transmitter
Product Usage Instructions
- Installation:
- Ensure the equipment is installed with a minimum distance of 20cm from the body to comply with FCC’s RF Exposure guidelines.
- Operation:
- Avoid co-locating the device and its antenna(s) with any other antenna or transmitter during operation.
- Safety Precautions:
- Always maintain the recommended minimum distance between the device and your body to prevent exposure to RF radiation.
FAQs
- Q: Why is it important to maintain a minimum distance of 20cm from the body?
- A: Maintaining this distance helps ensure compliance with FCC’s RF Exposure guidelines and reduces the risk of exposure to RF radiation.
- Q: Can I operate the device in conjunction with other antennas or transmitters?
- A: No, the device and its antenna(s) must not be co-located or operated with any other antenna or transmitter to avoid interference and maintain compliance.
Network Camera
- Thank you for purchasing this product. Please read this manual carefully before using it and keep it in a safe place.
Client downloading
- Please scan the lower (right) QR code, download and install the “v720” app, or search for “V720” in the mobile phone application store to download and install.
Add device
- Open the “v720” app and click “+” in the upper right corner of the page to start the binding process.
- Turn on and reset the device according to the instructions below. When the reset is successful, the blue indicator Bashes quickly. Click Next when Pnished.
- Select or enter the Wifi account you want to use and fill in the password
- Wait for the device to be bound successfully.
AP mode
- Press and hold the mode button until the blue indicator of the camera Bashes quickly and then release it.
- Mobile phone turn on the WIFI and connect to the WIFl hotspot starting with “NAX_”
- Return to the “v720” app and refresh the dropdown list, when the device displays that means the short-range mode connection is successful.
Matters needing attention
- The applicable working temperature of this product is -10°C~50°C. Please do not use this product in an environment where the temperature is too high or too low.
- This product is a precision electronic product. Please do not use this product in an environment that is excessively wet or may cause water to enter the product.
- To better use this product, please avoid the front and side of the lens close to the glass, white wall and other reßective objects, to avoid the picture being bright near and dark in the distance or whiteish.
- Please ensure that this product is installed within the range of Wi-Fi signal coverage, and placed as far as possible in a location with a better Wi-Fi signal, and try to install it far away from the microwave oven or other locations that may affect the signal.
FCC
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation. RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance of 20cm from the radiator of your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.