ideal lux Circus SP D60 LED Pendant Light Instruction Manual

: June 1, 2024
: ideal lux

Table of Contents

ideal lux Circus SP D60 LED Pendant Light
LEGENDA ICONE
IDEALUX
SAFETY INSTRUCTIONS
Product Specifications:
Frequently Asked Questions (FAQ):
- Q: Can the LED light source be replaced by anyone?
- Q: What should I do if the external power cable is damaged?
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ideal lux Circus SP D60 LED Pendant Light

INSTRUCTION MANUAL

LED 33W / 220~240V 50/60Hz – 8021696291376 NERO

THE SAFETY AND RELIABILITY ARE GUARANTEED ONLY WHEN INSTALLATION INSTRUCTIONS ARE PROPERLY FOLLOWED. PLEASE KEEP THIS INSTRUCTION SHEET FOR FUTURE REFERENCE.

LED

FOLLOW THE ASSEMBLY INSTRUCTIONS BY READING THE NUMERICAL PROGRESSION. THE LIGHTING FITTING SHOULD BE INSTALLED BY A QUALIFIED ELECTRICIAN.

QUALIFIED ELECTRICIAN

THE SAFETY AND RELIABILITY ARE GUARANTEED ONLY WHEN INSTALLATION INSTRUCTIONS ARE PROPERLY FOLLOWED. PLEASE KEEP THIS INSTRUCTION SHEET FOR FUTURE REFERENCE

This product is provided with a light source with effificiency energy class of:

EAN| Light Source Model| Energy Effificiency Class| Light Source (mA)| Light Source (V)
---|---|---|---|---
8021696291376| CIRCUS MODULE| F| 800 mA| 36 V DC

LEGENDA ICONE

| Replaceable light source by an end-user.
---|---
| Replaceable LED light source by an end-user.
| Replaceable light source y authorized personnel only.
| Non-replaceable light source. Upon end of life of the light source, the whole product will be replaced.
| Replaceable control gear by an end-user.
| Replaceable light source by authorized personnel only.
| Upon end of life of the control gear, the whole product will be replaced.

IDEALUX

SAFETY INSTRUCTIONS

1. This fitting is produced and tested in accordance with the str ictest European safety standards (EN 60 .598-1).
2. This fitting cannot be disposed of as household waste. For d isposal information ask the local authorities about how to collect it.
3. As indicate d by specific reg ulations, the lighting fitting shou ld be installed by a qualified elec trician.
4. If the external wire is damaged it has to be replaced exclusively by the manufacturer, distri butor or by a qualified electrician.
5. Always isolate power before commencing installation, maintenance or repair .
6. The luminaire contains certain parts which can be very hot.
7. Each material requires specific mounting accessories. Use screws and wall plugs s uitable for the material to which they are fastened. Those included may b e unsuitable.
8. Always tighten the screws firmly to avoid contact problems.
9. This fitting should only be installed indoors.
1 O. Luminaires not suitable for recessed on normally flammable suriaces.
11. Luminaire not suitable for d irec t mounting on normal flamm able suriaoes.
12. This fitting is only suita ble for fi xing to the ceiling.
13. This fitting is only suita ble for fi xing to the wall.
14. The weight of the lamp has to be supported by the chain. Adjust the length of the electric wire so that it is longer than the chain.
15. Only use lamps which do not exceed the maximum specified wattage

16. Jways observe the minimu m distance between the lamp and the surface bein g llt, as shown in the icon. Toe la mp can cause a fire if the min imum distance is not observed.
17. Auto -protected bulb . Only use bulbs marl<ed with this symbol. Halogen bulbs get very hot. Walt u ntil they coot down before replacing.
18. Cracked or broken s afet y glass has to b e replaced Immediately. Use only manufcturer approved parts complying with regulations.
19. Light source with n o t -substitutable light emitting diode (LED). Do not disassemble the product since the diodes can damage the eyes. Do not immerse in water. Wipe with a damp cloth. Do not use solvents or strong detergents .
20. This fitting Is equipped with a fuse. tt the lamp is out of order, replace the internal fuse.
21. Class I Electrical safety guaranteed b y the main insulation and an additional protective conductor (earthing) connected with the metal fr ame of the lamp. Ear thing Is obl igatory.
22. Class II Electrical safety g uaranteed b y the main Insulat ion and a double or reinforced Insulation. Earthing not necessary.
23. Class Ill Electrical safety guaranteed b y very l ow power supply (less than 50 Volt). Earthing excluded.
24. Not protected.
25. Protected against solid objects greater than 50 mm.
26. Protected against solid objects greater than 12 mm.
27. Protected against solid objects greater than 2,5 mm.
28. Protected against solid objects greater than 1 mm.
29. Dust protected.
30. Totally protected against dust Infiltration.
31. Not protected.
32. Protected against vertically falling water drops.
33. Protected against water drops falling with a maximum angle of 15° to the vertical axis.
34. Protected against rain.
35. Protected against s plashing water.
36. Protected against water jets.
37. Protected against strong water jets.
38. Protected against temporary Immersion.
39. Protected against prolonged Immersion.
40. Luminalre not suitable for covering with thermally insulating material.
41. Caution, r isk of electric shock.
42. Do not stare at the oper ating light source.