PECO CONTROL SYSTEMS T8168B-2 BACnet IP Connection Thermostat Instructions
- June 1, 2024
- PECO CONTROL SYSTEMS
Table of Contents
PECO CONTROL SYSTEMS T8168B-2 BACnet IP Connection Thermostat Instructions
Connecting to the Thermostat
Congratulations on your selection of the PECO T8168B-2 Thermostat. These instructions decribe the process for BACnet™ IP Connection.
Connect the T8168B-2 thermostat to power. The display will turn on and the unit will automatically become accessible on Wi-Fi.
Open the internet settings on the phone or device and look for the T8168 network. Actual screen images vary for IOS and Android.
-
Select “T8168 xxxxx” (xxxxx can be any 4-5 digits)
-
Enter password “12345678”
-
Press “Connect”
-
Sign into open BACnet™ Configuration Page at IP Address 10.10.0.1 on the T8168#### network
-
Select T8168 XXXX Network
-
Enter Password 12345678
-
Select Sign In to T8168 Network
-
Sign-In to open BACnet Configuration Page
-
BACnet™Configuration Page Sign In
-
Select your available local network, or enter your manual SSID
-
Enter your local network password and press “Join”
-
Wait for network configuration to be saved and connect to the local network.
-
After successful connection, select OK
-
To see your assigned IP Address, select the connected network. Press OK to return to the network screen
-
To change networks, select Disconnect on the Connected Network screen.
-
After disconnecting from WiFi, the thermostat must be removed from power and power reapplied for the connection to be available again.