Yunshi Electronics KGB-1 Karaoke Microphone User Manual
- June 1, 2024
- Yunshi Electronics
Table of Contents
Yunshi Electronics KGB-1 Karaoke Microphone
Specifications
- Compliance: Part 15 of FCC Rules
- Radiation Exposure Limits: FCC approved
- Minimum distance between radiator and body: 0cm
Welcome
Thank you for choosing to purchase this karaoke microphone, which uses industry-advanced technology. With strong compatibility, you can easily enjoy mobile song practice and KTV anytime and anywhere just by linking the audio playback device. Wish you a pleasant use!
Function
This karaoke microphone speaker set adopts advanced 1-wire communication
technology, mobile phone karaoke Bluetooth connection, and wireless
accompaniment, and is fully compatible with current mainstream mobile phones.
Whether you are a karaoke fan or an Android K fan, you can enjoy the pleasure
of karaoke with energy conservation and ease.
Instructions for microphone functions
Function
Support Bluetooth connection to play music/support TF card to play music/ karaoke sound reinforcement function / built-in reverberation sound effect function/headphone output function.
Accessories
Accessories
- Host: Microphone
- UX cable: Instructions
K song microphone
Switch on / off
When the machine is turned off, the product starts automatically with the
Chang An On / Off key. When the TF is not inserted when the card is used it
will enter the Bluetooth mode by default, and the voice prompt will be
“Bluetooth mode” Long press. The ON /OFF key turns off the machine.
Bluetooth connectivity
Open your phone’s Bluetooth settings, search for the device name, and then
make a pairing connection. After the connection is successful, there will be a
prompt tone, and the blue Light will always be on.
Mobile Playback
After the Bluetooth connection is successful, open the mobile music player and
download your favorite songs or the accompaniment can be played, and the
volume can also be adjusted to the appropriate level on the mobile phone.
Charge
- Connect the standard charging line to the charger for charging.
- The red light is always on when charging, and it is full off.
Attention
- Please disconnect the charger and turn it off before cleaning the machine.
- Nonprofessionals are not allowed to disassemble the equipment by themselves to avoid machine failure and loss of warranty rights.
- Please do not place the equipment in direct sunlight to avoid premature aging of electronic parts.
- Avoid using in places with flying dust or dirty environment ( dust is easy to cause equipment failure)
- Do not place the equipment in an excessively cold or overheated environment, which may cause the equipment to fail to operate normally.
- It is recommended that the ambient temperature of the equipment used should not exceed-10°C-40°C. Which is relatively moderate 10%-95%.
- Please do not put any objects into the equipment to avoid short circuits or circuit damage. Please do not spill any liquid on the product.
- Avoid friction and collision between the machine and hard objects to avoid scratching, falling off, or other hardware damage.
- The product shall not be exposed to the sun, fire, or similar overheating environment.
- It is forbidden to disassemble, impact, squeeze, or put the product into fire. If the battery has a serious failure, Do not continue to use it.
- This manual contains important information, please reserve it.
Bluetooth
- Press and hold the speaker power on the key to start the machine, and the voice prompt “Bluetooth mode” will flash at the same time. Connect the success blue light is always on.
- Turn on the mobile phone Bluetooth and scan, search for the device, and then pair and connect, and you can hear it after connecting The device sends a successful connection tone.
- After the microphone is turned on, it will automatically pair the speakers When the microphone is not paired, the blue light will flash, and the Bluetooth light will flash always bright
Note: After the device is connected to the mobile phone once, Bluetooth has a memory function, and it will automatically connect when the phone is turned on, To disconnect, disconnect Bluetooth through the phone settings. If you listen to music only, you can turn the microphone volume to the minimum.
Intelligent anti squealing
Sing loudly without howling within 10cm
High radio sensitivity
It is easy to sing with a 5-10cm microphone. microphone is loud and has good
sound quality.
Low latency
The delay is less than 40ms
Al functions
- 5 kinds of sound effects: One click to cancel the
- Original sound: F lexible adjustment of accompaniment reverberation and microphone volume.
Speaker
- Bluetooth version: 5.3
- Working voltage: 3.7V
- Frequency range : 20Hz-20KHz
- Power adapter: DC5V≤1A (common with mobile phone charger)
- Charging duration: 3.5-4 hours
Microphone
- Pickup: back pole condenser microphone
- Working voltage: 3.7V
- Frequency range: 20Hz-20kHz
- Power adapter: DC5V<1A (common with mobile phone charger)
- Charging duration: about 2.5 hours
Information
- Product name : mini karaoke microphone speaker set
- Product model: KGB-1
Note: The company’s products are constantly innovative and subject to change without notice
FCC STAMENTS
FCC Warning
This equipment has been tested and found to comply with the limits for a Class
B digital device, under part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used by the instructions, maycause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.
FAQ
Frequently Asked Questions
Q: Can I modify the device for better performance?
A: No, any changes or modifications not approved by the manufacturer may void your warranty.
Q: Is it safe to use the device close to my body?
A: Yes, the device is designed to be used with a minimum distance of 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>