NQV-2920 Professional Volleyball Set Instruction Manual

Table of Contents

NQV-2920-Professional-Volleyball-Set-PRODUCT

Specifications

Model: NQV-2920
Accessories: Top Pole, Middle Pole, Middle Pole with Ratchet, Bottom Pole, Net, Guide Rope, Carabiner, Boundary Line, Volleyball, Air Pump, Spool for Boundary Line, Tension Adjuster – A
Adjustable Heights : 7ft, 7.4ft, 8ft
Field Size : 30ft x 60ft

Step 1: Field Setup

Unfold the ribbon webbing and straighten it. Fix 4 ground nails to form a 30ft x 60ft field as shown in the picture.

Step 2: Net Assembly

Step 3: Pole Assembly

Connect the Top Pole, Middle Pole, and Bottom Pole. Adjust to desired heights (7ft, 7.4ft, 8ft).

Step 4: Net Tensioning

Pass the black line through the Top Pole eyebolt and Tension Adjuster B. Install the ratchet (Tension Adjuster A & B) to make the net anti-sag.

Step 5: Final Adjustments

Clip the Carabiner to the Top Pole eyebolt. Drive 4 ground nails into the ground. Adjust the Guide Rope and Ratchet to ensure the net is straight.

FAQ

Q: What are the adjustable heights for the poles?

Q: How do I make the net anti-sag?

A: Install the ratchet (Tension Adjuster A & B) to achieve proper tension and prevent sagging of the net.

Q: What is the recommended field size for setting up this volleyball set?

A: The recommended field size is 30ft x 60ft for optimal gameplay.
Thank you for choosing our product! We strive to provide the best quality and services for our customers.
If you have any problems, please feel free to contact us.

NQV-2920-Professional-Volleyball-Set-FIG-1

Step 1: BEFORE ASSEMBLY
Find a clean, level place to begin the assembly of your product.
Verify that you have all listed parts as shown on the part list pages.
Step 2: Unfold the ribbon webbing and straighten it, then fix 4 ground nails to form a 30*60ft field as shown in the picture.
Step 3: Pass the aluminum Top Pole through both sides of the net.
Step 4: Connect the Top Pole and Middle Pole and Bottom Pole. Both sides do.
- Attention: 3 adjustable heights. The first hole is 7ft in height. The second hole is for 7.4ft height, and the third hole is for 8ft height.
- The operation of aluminum rod height adjustment as follows:
Step 5: Pass the black line (on the side of the volleyball net) through the Top Pole eyebolt, and then pass it through the Tension Adjuster B as well
Step 6: Install the ratchet (Tension Adjuster A&B). The role of the ratchet is to make the net anti-sag.
Step 7: Clip the Carabiner to the Top Pole eyebolt.
Step 8: Drive 4 ground nails into the ground. Then, adjust the Guide Rope and Ratchet to make the net straight.