AIRPLUS FDKE3803 Speed Dehumidifier User Manual

AIRPLUS FDKE3803 Speed Dehumidifier

Specifications

• Product: Dehumidifier
• Applicable Places: Basement, storage room, library, archives, living room, bedroom, cloakroom, toilet, etc.
• Features: Air outlet, control panel, power cord, handle, air filter, continuous drain, air intake, water tank, casters

Product Usage Instructions

Positioning the Dehumidifier

Position the dehumidifier correctly to ensure optimal performance. Keep a certain distance from walls or other shelters to allow proper air circulation.

Turning On and Selecting Modes

1. Plug in the power supply to turn on the machine.
2. Press the standby button to activate the default operating mode. Press the switch key to shut down.
3. Use the wind speed selection key to switch between low, medium, and high wind modes.

Adjusting Humidity and Other Settings

1. Select humidity levels between RH40%-80% or continuous dehumidification mode.
2. Activate dry mode by pressing the dry button. Press again to return to standard mode.
3. Set a timer for 0-24 hours using the timing key.
4. Start the negative ion function by pressing the corresponding button.
5. The dehumidifier has intelligent temperature detection and defrost mode for efficient performance.

Emptying the Water Tank

1. When the water tank is full, the machine stops automatically.
   • Remove the tank and pour out the water.
2. Ensure the tank is properly placed back for continuous operation or use continuous drainage if available.

Cleaning and Maintenance

1. Remove and clean the air filter regularly to maintain efficiency.
2. Clean the filter frame with a dust collector and reassemble it onto the machine.

FAQ

Q: What should I do if the water tank is not properly placed?

• A: If the water tank is not correctly placed, the machine will not work, and the full water indicator will light up. Ensure the tank is securely in place.

Q: How do I activate the defrost mode?

• A: The dehumidifier has intelligent temperature detection and will automatically activate the defrost mode when needed to ensure efficient performance in low-temperature environments.

WARNINGS

This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision.

Product Details

1. Dry button
2. Negative ion button
3. Timer keys
4. Humidity status indicator
5. Humidity button
6. Wind speed button
7. Standby button
8. Water full indicator
9. Defrost indicator
10. Digital display
11. Wind speed indicator

Applicable Place

Wide range of applicable places:

• Basement, storage room, library, archives, living room, bedroom, cloakroom, toilet, etc

Position it correctly:

• To better play the performance of the dehumidifier, the main engine air inlet is used during the use
• Keep a certain distance from shelters such as walls

Usage Method

1. Plug in the power supply, and prompt the sound, The machine is powered on
2. Press the standby button, and the corresponding indicator light is on and displays the system’s default operating mode. again, Press the switch key once to shut down
3. Press the wind speed selection key to switch, There are three modes of low wind, medium stroke, and high wind ring
4. In the standard mode state, press Wet,Degree key, humidity can be RH40%-80%, and Cyclic selection between CO (continuous dehumidification).
5. Press the dry button, and the dry clothes icon lights up, and Dry mode starts; Press down on the dry suit again, and The dry button goes off and returns to standard mode;
6. In the shutdown state, press the timing key to make an appointment for 0-24 hours and start the machine at a fixed time; Under the power-on state, press the timing key to conduct 0-24 hours of timed shutdown
7. Press the start the ion negative ion work Yes, the negative ion indicator is on
8. Intelligent detection of dehumidification system temperature, turn on Defrost mode to ensure low temperature environment Maintain efficient dehumidification performance
9. Compressor power failure protection

Pour water

1. Full of water
   • When the water tank is full of water, the machine will automatically stop dehumidification, and the full water indicator will light up to indicate that water needs to be poured
2. Remove the water tank
   • Grasp the handles on both sides of the water tank and pull outward to take out the water tank
3. Pour water
   • Grasp the sides of the tank and pour the water clean
4. Put it back in the tank
   • Put the tank back and get back to work, If the water tank is not placed in place, the machine
   • The device does not work, and the full water indicator is on

Continuous drainage

1. Continuous drain
   • Remove the tank and see the continuous drain location
2. Continuous drain pipe
   • Insert the water pipe into the continuous drain, put it back into the tank, pipe mouth facing to ensure that the condensate is discharged smoothly

• Remove the filter frame
  • First, remove the inlet grille, Then remove the filter frame
• Dust cleaning
  • First use the dust collector to dust the air filter, and dry it after cleaning
• Install the filter frame
  • Install the filter screen onto the air inlet grille, and then install the air inlet grille onto the machine

BASIC PARAMETER INFORMATION

Matters Needing Attention

• Keep the machine in an upright position, ensure that there is at least 25cm space distance around the machine;
• After transportation or tilting, the machine needs to stand for 2 hours before it can be connected to the power supply;
• The air inlet and outlet shall not be blocked by other objects, so as not to affect the performance of the product;
• Before moving the machine, please turn off the machine and cut off the power, and then empty the water in the tank before moving;
• It is strictly forbidden to use bad or flammable detergents to clean the machine;
• When the machine fails, please shut down and cut off the power first;
• Must use a three-core socket power supply with ground wire;
• If the power cord is damaged, to avoid danger, it must be replaced by professionals from the manufacturer, its maintenance department, or similar departments;
• If the machine has not used for a long time, please turn off the power and unplug the power cord, drain the water in the water tank and dry the water tank, clean the air filter, and store it in a cool and dry place;
• After 3-6 months of use of the air filter, it is recommended to clean it.

Warm Tips

• It is necessary to prevent the drainage pipeline from freezing in a cold environment

Common troubleshooting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>