SHANNA B09839TPZM 3KW 220V Pool Heater Instructions
- June 1, 2024
- SHANNA
Table of Contents
SHANNA B09839TPZM 3KW 220V Pool Heater
Does not heat up?
A1: Please follow the steps below for troubleshooting.
- First, turn the temperature knob after turning on the circuit and observe if the heating indicator lights up, which proves that the machine is heating up.
- If the item can heat up normally, please check whether the heating duration is reached. The length of heating time is affected by many factors.
- We recommend heaters for capacities of up to 500 gallons. If this range is exceeded, heating will take longer. (For a 500-gallon pool, it takes about 9 hours to raise the pool temperature by 10 degrees Fahrenheit.)
- Besides, it is necessary to check whether the water can flow through normally.
- If the water flow is small, the temperature will rise too quickly and trigger overheating protection, which causes the item to stop working. There is a black knob on the side of the temperature knob.
- Once you unscrew the black cap, if a clear plastic rod pops out of the centre, just press it back in.
Q2: Pipe does not fit?
A2: Our item is equipped with two types of pipe fitting adapters, 48 mm
and 50 mm. 50mm pipe adapters are compatible with American Standard 2″ pipes.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>