BUDONI B0CG4TKFPB Magnetic Door Stops With 3M Tapes User Manual
- June 2, 2024
- BUDONI
Table of Contents
BUDONI B0CG4TKFPB Magnetic Door Stops With 3M Tapes
CONTACT US
BUDONI provides a detailed user manual for your better experience, but there
may be other details we didn’t consider. Please Do contact us immediately if
you have any issues or suggestions. BUDONI promises to offer service: FREE
RETURN, FREE REPLACEMENT or FULL REFUND to solve your issue and make you
satisfied.
Email: Kokopous@163.com
Product Description
BUDONI magnetic door stop is designed to stop your door, protect the wall from unsightly damage and conveniently hold your door open. Constructed of high- quality stainless steel, sturdy and rust-proof. Easy to install with 3M stickers, or use screws for a more permanent mount.
Two Modes
Wall Mounting
Floor Mounting
Self Adhesive Guide
Step 1: Clean all the dust/lint off the surface you want to stick on, and wait until it dries completely. (Recommend alcohol)
Step 2: Peel off and stick the 3M tapes to 2 baseplates of the doorstop. Press the stickers firmly for 1 minute.
Step 3: Choose the right position and stick part 1 on the floor.
Step 4: Peel off the outward tape of part 2, and push the door to stick on the tape.
Step 5: Complete. Wait for 24 hours before using it, the doorstop will
work better and longer.
(Tip: Wrapped with thick tissue for not working temporarily)
Note: When sticking, please slowly push and remove the air out. Please line two magnets up and connect to make sure stuck correctly.
Wall/Floor Installation Guidelines
- With a pencil, denote where the baseboard should be on the wall/floor.
- After twisting off the mountings, mark where the three holes are.
- With a 6mm drill bit on your electric drill, make the holes.
- Twist the expansion screws into their respective holes
- Fasten the baseboard with screws Spin the mountings to attach.
- Spin the mountings to attach them
Door Side Installation Guidelines
- Indicate the location of the baseboard on the door.
- Unscrew the door piece and mark the position of two holes.
- Fasten the base with screws
- Finish the door-side installation
Note: If installed on a wood baseboard, just drill 3 screws to fix the baseplate, then twist part 1, no need for the expansion bolt. The same way to install on the floor with screws.
s there any restriction on the surface?
Yes, the 3M sticker is suitable for flat and dry surfaces, like PVC surface, metal, wood plank and ceramic tile. To make adhesive work better, please use alcohol to clean all the dust/lint off the surface, and wait until it dries completely. If installed on drywall/cement wall/latex paint wall or any uneven surface, please use screws, otherwise, it will remove the paint.
How can I remove the 3M stickers if placed wrongly or want to reinstall to a new house?
Take a hair dryer to heat it, it will be removed easily. And if the sticker peeled off, heat it, it will be more sticky after pressing.
Are there two modes? How do I choose?
Yes, it can be mounted vertically to the floor or horizontally to the baseboard. When installed on the floor, you can choose the maximum distance between the door and wall. Another point, the magnet is stronger when installed horizontally.
Can I use the 3M stickers first?
Sure, easy to install with 3M stickers, or use screws for a more permanent mount. If the 3M stickers didn't work one day, you can install them with screws for longer service life.
If the magnet is too strong for my door, What should I do?
To reduce the power of the magnet, you can place a piece of clear tape/electrical tape/felt dot over the magnet.
I am not good at installing, any tips?
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>