OBONATE Mini Electric Screwdriver Instruction Manual

OBONATE Mini Electric Screwdriver

Feature

• Lithium Battery

• Worry-Free Guarantee

• Magnetic Motor

• Premium Steel

• LED Lighting

• Type-C USB

Product Description

1. Bit Holder

2. 3LED
   Low battery indicator: When low power occurs, the electric screwdriver will not rotate and LED light will blink when press turn button, please charge in time

3. Screw Button

4. Unscrew Button

5. LED Lighting Button One press: LED on/off Long press: adjust torque

6. Charging Indicator Red light for charging light off for fully charge

7. Type-C Charging Port
   

Product Parameters

Package List

• 1 x Electric Screwdriver
• 1 x 4Mm Manual Screwdriver
• 120 X Screwdriver Bits
• 1 x Cleaning Cloth
• 1 x Magnetizer Demagnetizer Tool
• 1 x Suction Cup
• 1 x SIM Card Eject
• 1 x Magnetic Mat
• 1 x Flexible Extension Shaft
• 1 x Usb Charging Cable
• 1 x Brush
• 1 x Angled Tweezers
• 12x Opening Picks
• 1 x Metal Sludger
• 1 x 307 Plastic Pry Tool
• 2 x Plastic Pry Tool
• 2 x Double-headed pry bar
• 3 x pentagon Opening Picks
• 1 x Extended telescopic pole
• 1 x Oxford Portable Bag

Support

If you have questions or problems, please contact our customer service support through Amazon.

How to prevent bit or screw stripping

1. Use the correct screwdriver bit for the selected screw – type and size
2. Keep your driver perpendicular to the screw head
3. Make sure the tip is fully seated into the screw head recess before you start turning
4. Apply the right amount of force
5. If using an electric driver is necessary, apply sufficient but not too much pressure on the driver
6. Stop immediately if the bit or screw starts stripping – switch to a different screwdriver or hold the one you’re using in a straight position.

Troubleshooting

Fault

1. Screwdriver not work
2. Cannot loosen the screws
3. Battery won’t charge
4. The bit’s magnetic is not strong enough to absorb screw
5. Can not find USB Charger
6. Rust on the surface of bit
7. Can not install furniture

Cause

1. Low battery power
2. Maximum electric torque 0.35N·m
3. The USB cable isn’t plugged in properly or specified charging voltage isn’t being used
4. Bit holder is magnetic to absorb bit, but the bit is not magnetic
5. To reduce e-waste and package waste, this toolkit only contain USB Type-C Cable, no USB Charger
6. High moisture in storage environment
7. This product is intended for precision maintenance.

Solution

1. Please charge the equipment in time
2. Manually loosen it first(maximum manual torque: 7N·m), than use electric mode
3. Check whether the charging indicator is on, insert the USB cable, and use the charging voltage specified in product parameters.
4. Put the bit on the magnetization zone of the Magnetizer Tool, it can strengthen the bit’s magnetism to grab screws
5. You could charge this electric screwdriver with your old USB charger, computer, laptop, power bank or other electric device which support USB output
6. Storage it in dry environment, and apply anti corrosive oil on the surface of bit
7. This electric screwdriver is specially designed for precision maintenance, such as electronics device, eyeglasses, toy, etc. If you need more torque for bulky products such as furniture, please manual operate it

Battery Tool Use And Care

1. Please fully charge the battery before the first time use. Always follow these instructions and perform the correct charging process.
2. Power Adapter Output: 4.5-6.SV 0.35A Max. Ambient Temperature while Charging: 1 to 40°C
3. If you are not going to use the appliance for a long time, unplug the AC plug from the wall outlet.
4. Do not charge the battery pack for a long time when not in use.
5. After prolonged storage of the device, it may be necessary to charge and discharge the cells or the battery pack several times in order to obtain optimal performance.
6. Do not disassemble, open or crush cells or battery pack.
7. Do not expose cells or battery packs to heat or fire, exposure to fire or temperature above 130°C may cause explosion.
8. Avoid storage in direct sunlight.
9. Do not expose the battery pack to mechanical shocks.
10. Battery packs operate at normal room temperature (20°C+S °C) is best.

General Power Tool Safety Warnings

WARNING! Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future references.

Work Area Safety

1. Keep the work area clean and well lit. Cluttered or dark areas cause accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite dust or fumes.
3. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical safety

1. Power tool plugs must match the outlet. Never modify the plug in any way.
2. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
4. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increases the risk of electric shock.

Personal Safety

1. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
2. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached\ to a rotating part of the power tool may result in personal injury.
3. Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

Power Tool Use And Care

1. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
2. Store idle power tools out of the reach of children and do not allow people unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
3. Use the power tool, accessories and tool bits etc. In accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
4. Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

Additional safety information

1. Switch the power tool off immediately if the application tool becomes blocked. Be prepared for high torque reactions which cause kickback. The application tool becomes blocked when it becomes jammed in the workpiece or when the power tool becomes overloaded.
2. Hold the power tool securely. When tightening and loosening screws be prepared for temporarily high torque reactions.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>