SONY WF-LS900 Noise Cancelling Headphone Instruction Manual
- June 2, 2024
- Sony
Table of Contents
LinkBuds S | Help Guide | Pairing and connecting with an Android sma…
https://helpguide.sony.net/mdr/linkbudss/v1/en/contents/TP100053849…
Wireless Noise Canceling Stereo Headset
LinkBuds S
Pairing and connecting with an Android smartphone
The operation to register the device that you wish to connect to is called
“pairing”. First, pair a device to use it with the headset for the first time.
Before starting the operation, make sure of the following:
The Android smartphone is placed within 1 m (3 feet) of the headset.
The headset is charged sufficiently.
The operating instructions of the Android smartphone is in hand.
1 Enter pairing mode on this headset.
When you pair the headset with a device for the first time after purchase or after initializing the headset (if the headset has no pairing information)
1. Remove both units of the headset from the charging case.
The headset turns on automatically.
The headset enters pairing mode automatically when you put the headset units
into both ears.
You will hear a notification sound and the voice guidance say “Pairing”, from
both headset units at the same time.
When you pair a second or subsequent device (the headset has pairing information for other devices)
1. Set the headset into the charging case.
Leave the lid of the charging case open.
2. With the lid of the charging case open, press and hold the pairing
button on the back of the charging case for about 5 seconds or more.
Note: The headset does not enter pairing mode with the lid of the charging
case closed.
The indicator (blue) on the charging case repeatedly flashes slowly twice in a
row and the headset goes into pairing mode.
You can remove the headset from the charging case after entering pairing mode.
When you put the headset units into both ears, you will hear a notification
sound and the voice guidance say “Pairing”, from both headset units at the
same time.
2 Unlock the screen of the Android smartphone if it is locked.
3 Find the headset on the Android smartphone.
1. Select [Settings] – [Device connection] – [Bluetooth].
2. Touch the switch to turn on the Bluetooth function.
4 Touch [LinkBuds S].
If Passkey (*) input is required, input “0000”.
The headset and smartphone are paired and connected with each other.
When the headset is stored in the charging case, the indicator (blue) on the
charging case flashes slowly for about 5 seconds.
When you are wearing the headset, you will hear a notification sound from both
headset units at the same time.
If they are not connected, see “Connecting to a paired Android smartphone“.
If [LinkBuds S] does not appear on your Android smartphone screen, try again
from the beginning of step (3).
- A Passkey may be called “Passcode”, “PIN code”, “PIN number”, or “Password”.
About the instruction manual video
Watch the video to find out how to perform the pairing for the first time. https://rd1.sony.net/help/mdr/mov0044/h_zz/
Hint
The operation above is an example. For more details, refer to the operating instructions supplied with the Android smartphone.
To delete all Bluetooth pairing information, see “Initializing the headset to restore factory settings“.
Note
If pairing is not established within 5 minutes, pairing mode is canceled. In this case, set the headset into the charging case, and start the operation again from step (1).
Once Bluetooth devices are paired, there is no need to pair them again, except in the following cases:
Pairing information has been deleted after repair, etc.
When a 9th device is paired.
The headset can be paired with up to 8 devices. If a new device is paired
after 8 devices are already paired, the registration information of the paired
device with the oldest connection date is overwritten with the information for
the new device.
When the pairing information for the headset has been deleted from the
Bluetooth device.
When the headset is initialized.
All of the pairing information is deleted. In this case, delete the pairing
information for the headset from the connected device and then pair them
again.
The headset can be paired with multiple devices, but can only play music from 1 paired device at a time.
Was this information helpful?
Yes No
2/14/2024, 9:37 AM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>