iHP F4238 Gas Fireplace User Guide

: May 15, 2024
: IHP

Table of Contents

INSTALLATION INSTRUCTIONS FOR OPTIONAL FACADE KIT
GENERAL INFORMATION
INSTALLATION INSTRUCTIONS
Documents / Resources

HEARTH PRODUCTS
KITS AND ACCESSORIES
901016-00
Rev. B 01/2020
FACADE KIT

INSTALLATION INSTRUCTIONS FOR OPTIONAL FACADE KIT

[For Use with Astria® CompassDLX and Compass Series and Superior ® DRL2000 & DRL3500 Series DV Linear Fireplaces]

Table 1
Facade Kits

Cat. No.| Model| Width x Height| Description|
---|---|---|---|---
F4,238| DS-BLK-RNCL35| 42-1/8 W x 28-3/4 H| Facade Kit, 35, Black
F4,239| DS-SS-RNCL35| 42-1/8 W x 28-3/4 H| Facade Kit, 35, Stainless Steel
F4,240| DS-BLK-RNCL45| 52-1/8 W x 28-3/4 H| Facade Kit, 45, Black
F4,241| DS-SS-RNCL45| 52-1/8 W x 28-3/4 H| Facade Kit, 45, Stainless Steel
F4,242| DS-BLK-RNCL55| 62-1/8 W x 28-3/4 H| Facade Kit, 55, Black
F4,243| DS-SS-RNCL55| 62-1/8 W x 28-3/4 H| Facade Kit, 55, Stainless Steel

PACKAGING LIST

1. ea. Top Panel
2 ea. Side Panels
1 ea. Bottom Panel
8 ea. Screws
1 ea. Installation Instructions

TOOLS / SUPPLIES NEEDED
Safety Glasses
Protective Work Gloves
Power Drill, and 5/16” Hex Bit Tool

GENERAL INFORMATION

Do NOT install this kit until the fireplace has been completely installed, the gas line has been connected and tested for leaks, and the burner operation has been verified.
READ ALL THE STEPS BEFORE STARTING THE INSTALLATION THE FIREPLACE MUST BE OFF AND COLD BEFORE BEGINNING.
ALL WARNINGS, PRECAUTIONS AND INSTRUCTIONS IN THE INSTALLATION AND OPERATION MANUAL PROVIDED WITH THE APPLIANCE APPLY TO THESE INSTRUCTIONS.
If you encounter any problems, need clarification of these instructions or are not qualified to properly install this kit, contact you local distributor or dealer.
If any of these parts are missing or damaged, contact your dealer or IHP.us.com for referral information.
IMPORTANT NOTE: 6” clearance to floor is required for this facade.

INSTALLATION INSTRUCTIONS

Follow the procedure ”Turning Off Gas To Unit”, located on the Lighting Instructions pullout labels in the control compartment of the unit and in the Installation Instructions provided with the appliance.
Remove barrier screen per instructions in the Installation and Operation Instructions manual provided with appliance.
Remove items from box and place on soft material (face side down to prevent damage / scratches) with tabs to the inside (Figures 1 and 2).
Assemble facade using provided screws (Figure 3).
Facade will mount on unit using the same hooks as the screen barrier assembly (Figure 4).

NOTE : DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.

Printed in U.S.A. © 2019 Innovative Hearth Products
P/N 901016-00 Rev. B 01/2020
Innovative Hearth Products (IHP) reserves the right to make changes at any time, without notice, in design, materials, specifications, and prices, and also to discontinue colors, styles, and products. Consult your local distributor for fireplace code information.

1769 East Lawrence Street
Russellville, AL 35654