HDVS 1852CSH TFT LCD Monitor User Manual
- May 15, 2024
- HDVS
Table of Contents
HDVS 1852CSH TFT LCD Monitor
Specifications
- Product: TFT LCD Monitor HDVS Series 1852CSH
- Input: VGA/DVI-D and HDMI
- Color Processing: True 10 bits
- Color Management: Independent Color Management (ICM)
- Contrast Control: Dynamic Contrast Control (DCC)
- Resolution: Supported 1080p Full HD
- Speakers: Built-in 2W+2W speakers
- VESA Standard: 100mm wall mountable capability
Safety Precautions
- Avoid exposing the product to rain or moisture.
- Avoid inserting metallic objects through ventilation grills.
- Ensure proper air circulation to prevent heat buildup.
- Do not place the unit on surfaces that block ventilation holes.
- Avoid extreme hot, humid, dusty, or vibrating environments.
- Clean with a slightly damp cloth and mild detergent, avoiding strong solvents.
Operating Instructions
- Power: Push to turn the unit on/off. Green LED light indicates power on, red LED light indicates standby mode.
- Adjust UP/DOWN: UP button increases values on OSD menu and for color adjustment. DOWN button decreases values on OSD menu and for auto adjustment.
- Item: Hot key for OSD adjustments of Volume,Contrast, Brightness, Red, Green, Blue.
- Menu: Push to call out OSD menu or used as confirm function in OSD menu.
- Source: [Add specific instructions here]
FAQ
Q: What do I do if liquid or solid objects fall into the cabinet?
A: Unplug the unit immediately and have it checked by qualified personnel
before further operation.
Q: Can I use strong solvents for cleaning?
A: No, avoid using strong solvents like thinner or benzene as they may
damage the unit’s finish. Use a slightly damp cloth with a mild detergent
instead.
Q: Is the unit waterproof?
A: No, the unit is not designed to be waterproof. Avoid exposure to rain
or water to prevent damage.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS.
CAUTION:
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product=s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
Precautions
Safety
Should any liquid or solid object fall into the cabinet, unplug the unit and
have it checked by the qualified personnel before operating it any further.
Unplug the unit from the wall outlet if it is not going to be used for several
days or more. To disconnect the cord, pull it out by the plug. Never pull the
cord itself.
Allow adequate air circulation to prevent internal heat built-up. Do not place the unit on surfaces(rugs, blankets, etc.) or near materials (curtains, draperies) that may block the ventilation holes.
Installation
Do not install the unit in an extremely hot or humid place or in a place
subject to excessive dust or mechanical vibration.
The unit is not designed to be waterproof. Exposure to rain or water may
damage the unit.
Cleaning
Clean the unit with a slightly damp soft cloth.
Use a mild household detergent. Never use strong solvents such as thinner or
benzene as they might damage the finish of the unit.
Retain the original carton and packing materials for safe transport of this
unit in the future.
Safety Precautions
Federal Communications Commission (FCC) Statement
This Equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that changes or modifications not expressly approved by that party responsible for compliance could void your authority to operate the equipment.
This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received including interference that may cause undesired
Features
- Multi-Function Display
- VGA/ DVI-D and HDMI Input
- True 10 bits Color processing engine
- Independent color management(ICM)
- Dynamic contrast control(DCC)
- Supported 1080p Full HD.
- Build-in 2W+2W speaker
- VESA standard bracket 100mm .
- Wall mountable capability.
Operating Instructions
Key Board
-
Power
Push to turn on and turn off the unit.- LED Green light: Power on
- LED Red light: Standby mode.
-
Adjust UP /DOWN
-
UP: Used as UP function. Or Increase value on the OSD Menu.
And as a hot key for color adjust function. -
DOWN: Used as DOWN function. Or Decrease value on the OSD Menu And as a hot key for auto adjust function.
-
Item:
Hot key for OSD adjustments of Volume , Contrast, Brightness, and Red, Green, Blue. -
Menu
Push to call out OSD menu. Or Used as Confirm function in OSD Menu. -
Source
Select input signal from D-SUB, HD,DVI .
KEY Lock Function:
Push “Menu” and “Item” , OSD of screen will show “Key Lock on”, Into key
lock mode. And push again , OSD of screen will show “Key Lock off “, Into key
unlock mode.
IR remote control(option)
-
Power
Push to turn on and turn off the unit.- LED Green light: Power on
- LED Red light: Standby mode.
-
Adjust UP /DOWN
-
UP: Used as UP function. Or Increase value on the OSD Menu.
And as a hot key for color adjust function. -
DOWN: Used as DOWN function. Or Decrease value on the OSD Menu.
-
Item:
Hot key for OSD adjustments of Volume , Contrast, Brightness, , and Red, Green, Blue. -
Menu
Push to call out OSD menu. Or Used as Confirm function in OSD Menu. -
Source
Select input signal from D-SUB, HD,DVI .
Connection : HDVS Series
OSD Function
Color:
-
Contrast
Adjust background black level of the screen image. -
Brightness
Adjust fore ground white level of the screen image. -
Color Adjust
Adjust Red, Green, Blue, color deepness for Users. -
Color Temp
Adjust color temperatures for users.
9300, 6500, 5800, sRGB, USER -
Back
Exit OSD menu.
Image Setting:
-
Clock
Adjust image distortion appearing as vertical or “noise” on the screen. -
Phase
Adjust image distortion appearing as horizontal or “noise” on the screen. -
Sharpness
Adjust the clarity and focus of the screen images. -
H. Position
Move the screen image left or right. -
V. Position
Move the screen image up and down. -
Back
Exit OSD menu.
OSD Menu:
-
OSD H. Pos
Move the OSD menu position left or right. -
OSD V. Pos
Move the OSD menu position up or down. -
OSD Timer
Set the OSD menu display time. -
Language
Select the desired language as English, French, German, Spanish,
Traditional Chinese Simplified Chinese, and Japanese. -
Back
Exit OSD menu.
Signal source
-
Select the input signal
D-sub, HD, DVI. -
Back
Exit OSD menu.
Audio
-
Volume
Control built-in speakers’ output Volumes -
Mute
Disable the unit’s sound output -
Back
Exit OSD menu.
Misc:
-
Auto Adjust
Adjust the best image. -
Color Adjust
Adjust the best image color. -
Reset
Return to factory default setting. -
Obiter (Screen Saver)
Use the manual buttons to on/off the screen saver -
Exit:
Exit the OSD menu.
PC Timing
| Mode | Resolution |
|---|---|
| 1 | 800*600@60 |
| 2 | 800*600@72 |
| 3 | 800*600@75 |
| 4 | 1024*768@60 |
| 5 | 1024*768@70 |
| 6 | 1024*768@75 |
| 7 | 1280*1024@60 |
| 8 | 1280*1024@75 |
| 9 | 1360*768@60 |
| 10 | 1920*1080@60 |
LCD monitor Mounting Guide
Wall mount/ VESA Bracket
Free your space with wall mount design.
Please follow the fix-hole size in back panel to install the LCD to the wall.
Specification
| Monitor model | 1852CSH |
|---|---|
| LCD panel | 18.5“ |
| Active area (mm) | 408.96x 230.04 |
| Picture format | 16: 9 |
| Max. resolution | 1920×1080 |
| Pixel pitch (mm) | 0.213 x 0.213 |
| Colours | 16.7M |
| Brightness | 1000 cd/m² [LED] |
| Contrast | 1000 :1 |
| Response time(Tr/Tf) | 10/10 ms |
| View angle (U/D/L/R) | 89/89/89/89 |
| HDMI input | 1x HDMI (A Type) |
| Audio input(R/L) | 1x (RCAx2) |
| PC input | 1x VGA input (D-Sub 15 pin) 1x DVI-D input |
| Earphone out | 1xPhone jack ,3.5ψ |
| Speaker | 2x built-in speaker (2 watt) |
| Touch screen type | Projected capacitive multi-touch screen |
| Touch screen Hardness | ≧6H |
| Touch point | Single/multi |
| Touch screen input method | Finger |
| Touch screen Transparency | ≧86% |
| Touch screen controller | USB |
| OSD setting | Yes |
| Power input | DC12V~26V |
| Power consumption | Approx. 35 watt |
| Dimensions (WxHxD) mm | 443.4X274.0X63.5 |
| Weight | 4.3kg |
| Operating temperature | -20° to 70° C |
Subject to technical changes without prior notice.
Appendixes
Troubleshooting
The tables provided below include some problems that the user may encounter while using the display and the corresponding solutions. Please refer to the contents of this section prior to contacting service personnel.
| Problem | Possible Causes | Solutions |
|---|
No picture
| 1. Is the power cable connected to the unit?
2. Is the unit turned on?
3. Is the signal cable connected to the unit?
4. Is the unit in power saving mode?
| 1. Make sure the power cable has been properly connected to the unit.
2. Turn on the unit.
3. Make sure the signal cable has been properly connected to the unit.
4. Press any key on computer keyboard.
Strange color
| 1. Is the signal cable connected to the unit?| 1. Make sure the signal cable has been properly connected to the unit.
Picture distortion
| 1. Is the signal cable connected to the unit?
2. Is the video input signal within the unit’s specified frequency range?
| 1. Make sure the signal cable has been properly connected to the unit.
2. Make sure the input signal is within the unit’s specified frequency range.
Picture is too dim
| 1. Have the unit’s brightness and contrast settings been set to the lowest level?| 1. Adjust brightness and contrast
Only sound but no picture
| 1. Is the connection of the input signal correct?| 1. Check connection of input signal.
2. Make sure the signal cable has been properly connected.
Only picture but no sound
| 1. Is the signal cable connected to the unit?
2. Has the volume been set to the min level?
3. Is the audio cable connected to the unit?
| 1. Make sure the signal cable has been properly connected to the unit.
2. Adjust the volume to an appropriate setting.
3. Make sure the audio cable has been properly connected to the unit.
Please contact the customer service center of your local dealer if you have any questions regarding the unit after reading the information provided above.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>