RG RayGalax ‎RG-LUNA-Ceiling LED Ceiling Light Fixture Instruction Manual

RG RayGalax ‎RG-LUNA-Ceiling LED Ceiling Light Fixture

Specifications

• Input voltage : AC220-240V
• Frequency: 50/60HZ
• Power factor (PF): >0.9
• Input power: MAX 40W
• Efficiency: >88%
• Output voltage: DC48V
• Output current : DC0.3-1A
• Output power : MAX 35W
• Photochromatic system: Sunttro Tricolor
• Connect solution: Bluetooth/Zigbee Smartphone App/control panel
• Dimensions: Lamp 605*H66.5mm
• Net weight : 5.5Kg
• Gross weight : 8Kg
• Packing dimensions: L765W765H85mm
• Warranty: 5 years

Product Usage Instructions

1. Check that all accessories are complete before installation. Contact the manufacturer if any parts are missing.
2. Handle the product with care during installation to avoid scratches.
3. Ensure the power is off before starting the installation process.

Installation Steps

1. Place the power supply box in the desired location and mark the positions for the three mounting holes.
2. Drill three 6mm diameter holes at the marked positions to a depth of 30mm or more.
3. Insert the rubber plugs into the drilled holes using a hammer. Secure the power supply box to the wall using the provided screws
4. Route the AC cable through the inlet hole on the side of the power supply box and connect it to the terminal block.
5. Hang the safety rope on both the power box and the fixture’s back panel, then connect the DC male and female connectors
6. Fit the lamp body towards the power supply box.
7. Adjust the position of the light body vertically and horizontally. Rotate the light body clockwise until it clicks into place on the back panel of the fixture.

FAQ

• Q: What should I do if some accessories are missing?
• A: Contact the manufacturer to request the missing accessories before proceeding with the installation.
• Q: Can I install the product without turning off the power?
• A: No, always ensure that the power is turned off before starting the installation to prevent any electrical hazards.
• Q : How should I adjust the light body after installation?
• A : You can adjust the light body vertically and horizontally by rotating it. Make sure it clicks into place securely for proper installation.

Accessory list

Installation steps:

1. Place the power supply where it needs to be mounted and mark it through the three mounting holes in the power supply box.
2. Drill three 6mm diameter holes in the positions marked in step 1 to a depth of 30mm or more.
3. Use a hammer to tap the rubber plug into the holes.
4. Lock the power supply box to the wall with a screwdriver.
5. The AC cable is routed through the inlet hole on the side of the power supply box and connected to the terminal block.
6. The two ends of the safety rope are hung on the power box and the back panel of the fixture, and the DC male and female connectors are plugged into each other.
7. The lamp body fits toward the power supply box.
8. Adjust the position of the light body up, down, left and right. Rotating the light body clockwise after feeling the power supply box fall into the round hole on the back panel of the light body. It means the installation is right in place when you hear a “click” and the light body can not be rotated.

Dimensions

Attention

1. Check the accessories are complete before installation, if not, please contact the manufacturer.
2. Handle with care when installing to aviod product scratches.
3. Power off before installation.

Specifications

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>