LG 38WR85QC UltraWide QHD Curved Monitor User Manual
- May 15, 2024
- LG
Table of Contents
LG 38WR85QC UltraWide QHD Curved Monitor
Dismantling information
The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of LG products to remove components and materials requiring selective treatment.
Product Identification
| Type of Product | Monitor |
|---|---|
| Model name | 38WR85QC |
Displays must be stored in accordance with the requirements stipulated in Appendix VIII (1) or (2) of Directive 2012/19/EU and must, amongst other things, be stored in a weatherproof manner. Containers with covers must be used when storing and transporting the Display
Materials and components for Selective Treatment
Displays may contain hazardous substances like Pb and BFRs which are covered by exemptions under the RoHS directive. However, the majority is present in the PCB assembly. In order to reduce emissions as much as possible, a complete disposal of the old appliance is required. This treatment may only be performed in authorized handling plants.
Materials and components| Notes| Quantity of items included in
product
---|---|---
Printed Circuit Boards (PCB) or Printed
Circuit Assemblies (PCA)
| With a surface greater than 10 square cm| O
Batteries| For Remote control| –
Internal batteries| –
Mercury containing components| display backlights| –
Liquid Crystal Displays (LCD) with a surface greater than 100 square cm|
Includes background illuminated displays with gas discharge lamps| O
Capacitors / condensers (Containing PCB
/ PCT)
| | –
Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter
or height| |
O
External electric cables cords| Power cord| O
Signal cable| O
Gas Discharge Lamps| | –
Plastics containing Brominated Flame
Retardants
| | –
Components and waste containing
asbestos
| | –
Components, parts and materials containing refractory ceramic fibers| | –
Components, parts and materials containing radioactive substances| | –
Tools Required
List the type that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed.
| Tool Description | Tool information |
|---|---|
| Screw driver | 
Plastic Hera Jig| 
Product Disassembly Process
-
Batteries
Batteries can easily be removed from the remote control once the back cover of the remote control has been removed.
None
Batteries can easily be removed from the PCB Assembly once the back cover of product has been removed.
None -
PCBs and LCD Module
Set up the monitor set on JIG with stand body assy upside position.
Remove the stand body by one-click button.
Remove 4EA screws to disassemble the back cover. (Tool: screw driver with smaller “+” tip.)
Remove the back cover plastic JIG.
Remove the shield side cover
Remove 4EA screws to disassemble rear shield assy from module. (Tool: screw driver with smaller “+” tip.)
Remove all harness,speakers, bottom sub PCB board, joystick cover assy
Remove 15EA screws to disassemble main PCB and power board
Remove 16EA screws to remove middle cabinet from module. (Tool: screw driver with smaller “+” tip.)
Module
-
Power cord and signal cables
A Power cord plugged into the back of the display can easily be removed by hand or cables are provided as de-attached from the product
-
Capacitors > 25 mm
Capacitors > 25 mm are located in the power supply units and can be removed by nipper
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>