GERGO MF19062.2 Mother Daughter Floor Lamp User Manual

: May 15, 2024
: GERGO

Table of Contents

Introduction
Package Contents
Specification
Product Structure (inch)
Installation
Usage
Rotary switch ON/OFF
Remote Control
When can you use the remote control?
How to Repair the Remote Control and the Bulbs if the Remote is not
Product Care
Guarantee
WARRANTY POLICIES
NON-WARRANTY PROVISIONS
FCC Caution
Read User Manual Online (PDF format)
Download This Manual (PDF format)

GERGO MF19062.2 Mother Daughter Floor Lamp

GERGO MF19062.2 Mother Daughter Floor Lamp

Introduction

Thank you for choosing our floor lamp.Please read this user manual carefully and keep it for future reference, If you need any assistance please contact us your order number and details.

Package Contents

LED Bulb x2
Lamp base xl
Iron Pipes xS
Remote control xl
User Manual xl
AAA Batteries x2
lamp shade x2

Specification

MODEL	MF19062.2

Product Structure (inch)

Installation

Carefully remove all parts from the box and remove all plastic coverings

$Product Structure $inch$$

Step 1-5 : Insert all the poles through screw side by side according to installation map

Step6 : Put the lamp shade through the lamp base. (Screw out the lamp nut from the lamp base firstly)
Step7 : Screw the lamp nut to the bulb base
Steps – 9 : Put the small lamp shade through the lamp base and screw the lamp nut to the bulb base.
Step 10-11: Screw the two bulbs to the lamp bases.

Usage

There are two ways to control : Rotary switch control/Remote control

Rotary switch ON/OFF

Remote Control

| Short press for turning on/off.
---|---
| Short/long press to change three color temperature from 3000 – 4000 – 6000K step by step or step-less.
| Short/long press to enhance the brightness as you like.
| Short/long press to lower the brightness as you like.

The Left buttons are for Mother lamp and the right Buttons are for daughter lamp.

When can you use the remote control?

Two intelligent bulbs are included in the package. You may use regular bulb to replace the intelligent bulb if you prefer that. Please note that regular bulb cannot match the remote control. Need to repair the remote control and bulbs if you replace one of them. Please check the repair method below. Rotary switches are the prerequisite for remote control. Make sure you have turned on the lamps with the rotary switches when you are using the remote.

How to Repair the Remote Control and the Bulbs if the Remote is not

Working?

Turn off the mother lamp with the rotary knob firstly
long press on the left.
Keep on pressing the button and turn on the mother lamp with the rotary knob.
The lamp will flash for two times means repair is done. Choose the right buttons with the same process for the daughter lamp.

The left buttons for mother lamp only, meanwhile the right buttons for daughter lamp only ..

Product Care

Please do not bend violently the lamp head to avoid damage when adjusting the angle of the lamp.
Please read the user manual before use. indoor use o n I y . It is non waterproof .Do not use this production , under humid environments or temperatures.
Suggest indoor use . It is non waterproof .Do not use this product in humid environments or at high temperatures.
Cut off the power when cleaning it or not using it.
Do not use it exceed the voltage , the proper voltage for US is ACllO- 120V.60Hz.
Stop using immediately it if there is any defective issues found in the product.

Guarantee

Our standing floor lamp is backed by 12 MONTHS product warranty. For questions ,assistance , or support , please contact the Customer Service with your order number and product model number. We will send you future information about the return or the exchange.

WARRANTY POLICIES

Our floor lamp is backed by 12 Months product quality reason warranty.
The postage for the return or replacement of goods without quality problems should be paid by users and the postage for the re-delivery should be covered by the seller. Relevant invoices and free gifts, if having, should be sent back together. For questions ,assistance, or support, please contact the Customer Service by e-mail with your order number and product model number. We will send you future information about the return or the exchange.

NON-WARRANTY PROVISIONS

Unauthorized repair, misuse, collision, negligence, abuse, accident, alteration, or tear-up or alteration of label or false-proof mark;
Alteration, replacement or tear-up of the product’s original serial number label and other similar phenomena;
No product serial number, nonconformity between the product modem and serial number on the warranty voucher and the real product;4. Expiration of the product warranty;
Product appearance damages due to abnormal usage;
0uter package and the attached free gifts, out-of-scope service or additional configurations or free gifts promised or provided by sales personnel;
Improper storage, for instance, functional damages caused by long-term exposure to abnormal humidity or temperature;
Damages caused by failure to follow the operating instructions, manmade abuse or misuse, unauthorized modification, force majeure.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in the exposure condition without restriction.