LALAHOME LH1001 REALSCOOPER Smart Cat Litter House User Manual

May 15, 2024
LALAHOME

LALAHOME LH1001 REALSCOOPER Smart Cat Litter House User Manual

LALAHOME LH1001 REALSCOOPER Smart Cat Litter House.jpg

DECLARATION:

Thank you for purchasing the LALAHOME REALSCOOPER Smart Cat Litter House. LALAHOME SMARTTECH is dedicated to enhancing the pet-owning experience through the power of design, and this manual is designed to assist you in better understanding and utilizing our product.

Download the LALAHOME SMARTECH APP

  1. Scan the QR code to download the APP suitable for Android or iOS users.
  2. iOS users can also download the LALAHOME SMARTECH APP from the Apple App Store, while android users can find it on Google Play.
  3. Alternatively, you can download the APP from our official website at www.lalahome.com.

SUGGEST TO PURCHASE THE BEST 3-IN-1 PREMIUM BENTONITE CAT LITTER
FOR REALSCOOPER FROM www.lalahome.com.

I. USER NOTICE

  1. Strictly follow the instructions in the manual for the installation and use of this device.
  2. Place the device on a flat surface.
  3. The glass on the top of the device is fragile; do not place items on it to avoid safety hazards.
  4. Do not use the device in high-temperature or high-humidity environments.
  5. This device is only suitable for clumping cat litter, such as mineral cat litter; do not use non-clumping cat litter.
  6. Do not add items other than clumping cat litter inside the toliet tray.
  7. Do not force cats into the device.
  8. This device is not suitable for cats under 6 months old or weighing less than 1kg (2.2lbs).
  9. The entire device is not waterproof ; avoid immersing or exposing it to water. The toilet tray and trash bin can be cleaned by water. For the device main body, please use only a damp cloth to wipe for cleaning.

II. IN THE BOX

PLEASE READ ALL THE INSTRUCTIONS BEFORE INSTALLING AND USING YOUR REALSCOOPER

  1. Main device 1 pc
  2. Adapter x1 pc
  3. Manual x1 pc
  4. Quick Guide x1 pc
  5. Waste Bags x1 Roll

FIG 3 IN THE BOX.JPG

FIG 4 IN THE BOX.JPG

PLEASE READ ALL THE INSTRUCTIONS BEFORE INSTALLING AND USING YOUR REAL SCOOPER

III. INSTALLATION INSTRUCTIONS

Scan the QR code to watch the Instruction videos.

FIG 5 Scan the QR code.JPG

Step 1: Remove the device and its accessories from its packaging box.
Step 2: Take out the adapter, litter drainage footstep, and 1 roll of waste bag from the accessory box .

INSTALLING THE WASTE BAG:

Step 3: Take one piece of bag from bag roll and place the balance into the roll holder at the front of the trash bin.
Step 4: Release the u-shaped strip and movable bar by unwrap the film wrapped on the edge of trash bin. Spread out the bag edge alongside the rim of the bin. Clip the front side with u-shaped strip and clip the other side by the foldable clip of the movable bar.

FIG 6 INSTALLING THE WASTE BAG.JPG

THE OPERATION PROCESS SHOULD BE HANDLED LIGHTLY
! TO AVOID PRODUCT BRUISES AND SCRATCHES.

PLACE THE DEVICE INDOORS, NEAR THE POWER SOURCE IN A DRY PLACE, AND PREPARE FOR USE.

BEFORE PRESSING THE CONTROL PANEL BUTTONS, PLEASE LONG-PRESS THE MIDDLE BUTTON TO UNLOCK THE CHILD LOCK. WHEN THE CHILD LOCK IS ACTIVE, THE BUTTONS CANNOT BE OPERATED.

INITIAL LITTER ADDITION

FIG 7 INITIAL LITTER ADDITION.JPG

Step 1: Remove the trash bin, pinch the clip in the middle of toilet tray to pull it out.
Step 2: Add sufficient new litter into the tray to MAX line.
Step 3: Push the tray back into the main device . Make sure you hear the click sound to comfirm that the tray has been correctly put into place.
Step 4: Put the trash bin back and place the drainage footstep on the top. Make sure do not leave gap in both side between the bin and main device.
Step 5: Add new litter into the top reservoir till MAX line. Close the lid and clip it to main body firmly.
Step 6: Plug the main device into power socket, wait until it completes self- test. Double-click the right button to preset correct balance count in the top reservoir so that APP can remind you once the litter stock runs out.

Congratulations, your RealScooper is now ready to use. Once your cats leave the RealScooper, It will automatically scoop twice then sterilize the litter bed and deodorize the trash bin. Meanwhile you will receive a notification from LALAHOME SMARTECH APP. Once all 5 cells litter in top reservoir used up, the APP will remind you to add new litter in time. And, when the trash bin is full, you will also get a notification from the APP.

1ST TIME TO FILL LITTER TO YOUR REALSCOOPER

FIG 8 TIME TO FILL LITTER TO YOUR REALSCOOPER.JPG

REFILL LITTER AFTERWARDS
When the device detects that the volume of litter bed is running low, it will dispense 1 cell of new litter to the litter bed. The balance count will be reduced accordingly. When all 5 cells litter in the top reservoir are used up, you will receive a reminder to add litter in time.

( If the amount of litter is not enough to fill all 5 sells of the top reservoir, double-click the right button to set correct counts. Single click during its blinking to adjust the numbers then double click again to confirm your setting.)

FIG 9 TIME TO FILL LITTER TO YOUR REALSCOOPER.JPG

REPLACE THE WASTE BAG

FIG 10 REPLACE THE WASTE BAG.JPG

APP download and Wi-Fi configuring
iOS users can download the LALAHOME SMARTECH APP from the Apple App Store, while Android users can find it on Google Play.

i. The device supports both 2.4G WI-FI and 5G WI-FI without switching networks.
ii. Make sure your phone has connected with Wi-Fi and TURN ON BLUETOOTH before connect to RealScooper.

FIG 11 APP download and Wi-Fi configuring.JPG

Use “Share device” function in the APP to authorize another user to access your device.

Understanding the Control Panel:

All buttons function are printed on the left side.

FIG 12 Understanding the Control Panel.JPG

FIG 13 Understanding the Control Panel.JPG

Details of Remote Operation through the APP can be found in the APP functionality descriptionon the APP page.

IV. INSTRUCTION FOR USE

This device is a fully automatical smart litter house. Once you completed the first set up of litter refill. You do not need to attend its use.

However, in order to enhance user engagement experience, the device still provides manual operation and remote control through the APP .

FIG 14 INSTRUCTION FOR USE.JPG

Self Refill: When the toilet tray detects the litter bed turns to be low, it will automatically drop one cell of litter to replenish the litter bed.

3. Automatic Safety Features
Safety Protection:

  1. During the scooping operation, if cat is moving nearby the main device, the rake will retract to its original position.
  2. During the scooping of waste, if cat approaches the main device, the rake stops. It resumes 30 seconds after cat leaves.
  3. During the scooping operation, if cat enters the litter box to poo, the scooping will be cancelled. It will start another cycle of scooping after the cat leaves.
  4. The ultra-slow-speed motor is gentler than a hand and won’t harm the cat.
  5. Motor dejam function ensures the motor returns backward if obstructed.

FIG 15 INSTRUCTION FOR USE.JPG

8. Notification Alerts

  1. Trash Bin is full:
    When the trash bin is full, the device will send a message through APP “Trash bin is full, please clean it in time.”
    (The device’s control panel will display a warning icon and error code 4.)

  2. Run out of litter stock:
    When all 5 cells of the litter reservoir have been used up, the device will send a message through APP .

  3. Cat Entry Notification:
    When the cat enters the litter house, the device will send a message through APP “xx:xx:xx I your cat visited REALSCOOPER.”

  4. Motor Block Notification:
    When the motor are blocked the device will send a message through APP “xx:xx:xx I your motor is stuck. Please clear the obstacles,.”

  5. Other App Messages:
    a. The real-time weight of the cat will be displayed on the APP .
    b. The remaining capacity of the litter reservoir will be displayed on the APP .
    c. The number of times the cat visited the litter house of the current day will be displayed on the APP .
    d. The remaining capacity of the trash bin will be displayed on the APP .

9. Customized Clumping Delay Setting

  1. With the child lock unlocked, simultaneously press the left button + centre button to adjust the cat litter clumping delay settings.
  2. Click the left button to decrease the clumping duration, and click the right button to increase the clumping duration.
  3. After setting, click the centre button to save the setting.
  4. The clumping delay can be set to a maximum of 30 minutes and a minimum of 1 minute.

FIG 16 Customized Clumping Delay Setting.JPG

V. CLEANING INSTRUCTIONS

1. Cleaning Steps

Step 1: Disconnect the power.
Step 2: Take out the trash bin.
Step 3: Slide out the toilet tray and pour the cat litter into a waste bag.
Step 4: Clean the trash bin, toilet tray, and litter drainage footstep with water.
Step 5: Wipe all components to dry.
Step 6: Place the toilet tray back into the main device, ensuring the locking latch clipped in place.
Step 7: Place back the trash bin and drainage footstep.

FIG 17 CLEANING INSTRUCTIONS.JPG

Rake Disassembly and Cleaning :

FIG 18 Rake Disassembly and Cleaning.JPG

Step 1: Double-click the left button, and the rake will be moved to the middle horizontal position to the toilet door.
Step 2: Loosen the two fixing screws and take it out.
Step 3: Remove the rake for cleaning and insert it back after being cleaned.
Step 4: Tighten the two fixing screws to secure the rake.
Step 5: Double-click the left button, and the rake will return to its initial position.

VI. COMMON PROBLEMS AND SOLUTIONS

1. Can kittens use this product?
This device is suitable for cats aged 6 months and older, weighing more than 2.2lbs (1 kg).
If the cat’s weight or age does not meet the criteria, please do not use this device.

2. What if my cat is unwilling to use RealScooper?
If the cat is wary, you can place the RealScooper main device next to the old litter box for some time and pour some old litter with the cat’s own scent into the toilet tray. Familiar scents will help the cat adapt to RealScooper more quickly.

3. Is it dangerous for the cat to enter during the scooping process?
If the cat enters during the scooping process, the monitoring sensor will be triggered immediately, and the device will stop running immediately. The device will resume operation 30 seconds after the cat leaves the litter house, so there is no need to worry about any danger.

4. What types of cat litter can I use?
This device supports clumping cat litter, such as mineral cat litter, corn cat litter, tapioca cat litter (recommended length not exceeding 0.59”/1.5 cm). Types of cat litter not supported include tofu cat litter (length exceeding 0.59”/1.5 cm), pine cat litter, crystal cat litter, and other long and non- clumping types.

5. How much litter should I add?
It is recommended to add around 6.61lbs (3 kg) of mineral litter for the initial use (using self-refill to add litter approximately 3 cells).

6. When should I add more cat litter?
The device will automatically judge the remaining cat litter in the toilet tray and initiate a refill. Please replenish the cat litter reservoir in the device promptly based on APP notifications.

7. How often should I clean the waste bin?
It can vary based on specific usage conditions (such as the number of cats). It is recommended to change the waste bag every 7 days for one cat, every 5 days for two cats, and every 3 days for three cats (increase bag change frequency in hot weather).

8. How often should I clean the toilet tray?
It can vary based on specific usage conditions (such as the number of cats or their toilet habits). It is recommended to clean it around once a month.

VII. QUICK TROUBLESHOOTING

1. When the display screen shows the corresponding error codes below, please follow the corresponding solutions to resolve the issues.

FIG 19 QUICK TROUBLESHOOTING.JPG

If you encounter a numerical code not mentioned above, it indicates the simultaneous occurrence of multiple errors. For example: If error codes 1 and 2 appear simultaneously, the error representation will be 3. If you are unable to resolve the issue, please contact customer service [email protected] for assistance.

When the display screen shows the corresponding error codes, please follow the corresponding solutions to resolve the issues. In case of device malfunctions, please send the error codes displayed on the screen to [email protected]. Our after-sales engineers will assist users in troubleshooting based on the error codes.

For a more comprehensive FAQ, you can scan the QR code
or visit the official website at www.lalahome.com.

VIII. FCC RULES

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.

This unit is Compliant with FCC Requirements.

FCC idenifier: 2BBSE-LH1001

NOTE:
This equipment has undergone testing and meets the requirements for a Class B digital device, as outlined in part 15 of the FCC Rules. These requirements are designed to provide reasonable protection against harmful interference when used in residential installations.

The equipment generates, uses, and may emit radio frequency energy which, if not installed and used in accordance with the instructions, could result in harmful interference with radio communications. It is important to note that there is no guarantee that interference will not occur in a particular installation.

If the equipment does cause harmful interference to radio or television reception, which can be confirmed by turning the equipment off and on, the user is advised to take one or more of the following actions to correct the interference:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Use a different electrical circuit for the equipment than the one used by the receiver.
  • Contact the dealer or an experienced radio/TV technician for assistance.

Warning:
Any changes or modifications made to the equipment without the express approval of the party responsible for compliance may result in the user’s authority to operate the equipment being voided.

The distance between user and products should be no less than 20cm.

IX. DESCRIPTION OF HAZARDOUS SUBSTANCES

This unit complies with CE market standard.

Products comply with EU RoHS and REACH requirements.

X. PRODUCT PARAMETERS

Product Name: REALSCOOPER Smart Cat Litter House
Model Number: LH1001
Internet Connection: WIFI: 2.4G & 5G, Bluetooth
Net Weight: 16 KG
Input: AC100~240V, 50/60Hz, 0.6A Max. Output: 12V 2A
Implement Standard: UKCA, FCC-ID, CE-RED, RoHs, REACH, CA65,GB4706-1, PSE,
TELEC, BSMI, NCC, KC
Manufacturer:Shenzhen LALAHOME Smartech Co.,Ltd.
Website: www.lalahome.com

Shenzhen Lalahome Smartech Co., Ltd. has the right of final interpretation

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

LALAHOME User Manuals

Related Manuals