PETREWY WF230 Wireless Charging Pet Water Dispenser User Manual

PETREWY WF230 Wireless Charging Pet Water Dispenser User Manual

Pet fountain – Round – Transparent

Contents:
Before getting started, ensure the package contains the following

• 304 Stainless Steel Base 1
  Wireless Water Pump 1

• 304 Stainless Steel top cover 1
  PC bucket body *1

• Screwdriver 1
  Fine bristle brush

• Host *1

• Filter cotton 2 Filter element 2

• Filter tank *2

Intended Use

• This product is intended to be used as a water source for pets
• This product is only suitable for dry indoor areas and can be used in mobile scenarios
• We are not responsible for damage caused by improper use or failure to follow these instructions

Before First Use

DANGER
Risk of suffocation! Keep any packaging materials away from children-these materials are a potential source of danger, e.g. suffocation.

PRODUCT PARAMETERS

Product Name: Wireless Charging Pet Water Dispenser
Product Model: WF230
Product material: 304 Stainless Steel+PC+ABS
Voltage/current: 5V/100MA
Filter material: sponge + resin + activated carbon
Dimensions (LWH): 29.514.519cm
Color: transparent + argent
Capacity: 3 L
Weight: 1.2 KG

PRODUCT INTRODUCTION

Instructions for use:

1. Take out the filter cotton and rinse it with water and soak it in room temperature water for 10 minutes; (A small amount of black coconut shell toner and yellow ion particles is normal and has no health impact on pets)

2. Install the wireless water pump to the bottom of the barrel and fasten it to the hole (installed before delivery).

3. Fasten the stain- less steel base to the barrel body (it has been installed before delivery)

4. Install the two sets of filter slots to hang on the two sides of the barrel;

5. First place the filter element in the filter tank, and then put the filter cotton on it;

6. Align the stainless steel top cover with the middle hole of the barrel body and place the buckle

7. Align the host with the middle hole of the barrel and insert it tightly

Note: The host can not be washed and soaked with water

Note: Except the main ma- chine, other parts can be cleaned with water.

Wireless water pump dismantling process:

• Use a screwdriver to unscrew
  

• Remove water pump cover
  

• Pull out the pump screw
  

• Rinse the inside with a fine brush
  

Green button: Sensing water Double click toggle

Green button: Sensing water Water for one minute every hour Blue represents the growth pattern

Close button: Double click to switch

Cleaning and maintenance

WARNING
The main unit cannot be washed in water, there are batteries and motherboards inside, and the main body shell can be wiped lightly
CAUTION
This product is not suitable for dishwashers
CAUTION
Disease risk! Please wash directly with water. Do not use soap or other methods to clean the filter cotton. Detergent residue may damage your pet’s health.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>